Solar Power Battery Kits

Fox ESS Evo 10.0 kW + 10.24 kWh Integrated Storage & Inverter System #2: FE-EVO10-8H Fox Evo 8.0kW Datasheet Fox Evo 8.0kW User Manual Fox Firmware Upgrade Fox ESS Evo 8.0kW + 10.24kWh Battery Storage System UK The Fox ESS EVO10-8H combines a powerful 8.0 kW hybrid inverter with a 10.24 kWh LiFePO₄ battery in one sleek, IP66-rated enclosure. Designed for UK installations, this solution supports backup power (EPS), parallel scalability, and export limitation, making it ideal for energy-conscious homeowners and installers. This all‑in‑one hybrid inverter + battery system has been designed for an indoor or outdoor installation. This integration solution of a powerful inverter, high‑capacity battery, integrated Emergency Power Supply (EPS), and advanced smart monitoring comes in compact and aesthetically pleasing design. This product is ideal for homeowners looking to: Maximise solar self‑consumption Have built‑in backup power in a grid outage Deploy a minimalist, weatherproof design Scale storage later when needed up to 30.72 kWh This series is also suitable for light commercial applications where modular expansion is important. With full UK compatibility (export limiting, CT/meter interaction, DRM/ESTOP), this model is built for the UK solar & storage market. Key Benefits - Inverter Maximum Power & Oversizing 8.0 kW inverter output 225 % PV oversize ratio (you can oversize your PV array up to ~2.25×) MPPT & Input Flexibility 3 independent MPPT channels 80 V low start‑up voltage (enhanced early morning / low irradiation performance) Display & Interface Built-in LCD display with magnetic cover (for clean aesthetics) Integrated Wi‑Fi (no external dongle required) Support for export limitation via CT, meter, DRM0, ESTOP EPS & Overload Capability EPS (Emergency Power Supply) mode with up to 200 % overload capability Parallel mode: up to 3 EVO units in parallel for increased capacity or power Protection rating: IP66, suitable for outdoor installations Key Benefits - Battery Type & Chemistry Integrated 10.24 kWh LiFePO₄ (LFP) battery Scalable: up to 30.72 kWh when paralleling multiple units Performance & Efficiency Depth of Discharge (DoD): 95 % High charge/discharge rates: up to 10 kW per unit High round‑trip efficiency for reduced energy losses Safety & Environmental Protection IP66 rated enclosure (dust tight and heavy rain protection) Integrated battery warm-up (to maintain performance in cold climates) Built-in fire suppressant system Technical Specifications: Inverter  Inverter Rating 8.0 kW  PV Oversize Capability 225%  MPPT Inputs 3    On/Off Grid Mode                     Supported Start Up Voltage 80 V Maximum DC Current  20 A / 25 A Imp / Isc Emergency Power Supply (EPS) 200% capability Export Limitation CT / Meter / DRM0 / E‑Stop compatible Communication Integrated Wi-Fi (no external dongle required) Parallel Mode Up to 3 modules in parallel Protection / Ingress Rating IP66  Weight 115 kg Display / Interface LCD screen with magnetic protective cover Technical Specifications: Battery Battery Type LiFePO₄ (LFP) integrated Usable Capacity 10.24 kWh Maximum Scalable Capacity 30.72 kWh (via parallel modules) Maximum Charge / Discharge Rate Up to 10 kW per unit Depth of Discharge (DoD) 95 % Warm-up / Heating Integrated battery warm-up system Fire Safety Built‑in fire suppressant Protection Rating IP66 (sealed for outdoor use) Round-trip Efficiency 95% Why Choose the Fox ESS Evo 8.0 kW System? Perfect for UK Homeowners Who Want: Lower energy bills Grid independence & backup Smart control of solar and storage A modern, minimalist solution that’s built to last Smart Monitoring & Control Easy Installation for Installers All-in-One Simplicity — no separate inverter + battery boxes. Everything built into one unit. Efficiency & Performance — supports 200% PV oversizing, ensuring you can maximise solar input. Scalability & Flexibility — add more units later to scale capacity and flexibility. Robust Safety Features — built-in fire suppression, integrated battery heating, and durable IP66 enclosure. Please note: The standard warranty on the product is 5 years but it could be extended to 10 years in total after successful registration on the Fox website below. https://www.fox-ess.com/warranty-registration-2/

To view our full range of installed battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis S6 AC Charger Data Sheet   Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Solis S6 AC AI Optimised Inverter Charger with Dyness 10.24kWh Battery The Solis S6 AC Charger is a high-performance energy storage solution designed for UK homes and businesses. Combined with the Dyness 10.24kWh Powerwall Battery, it enables efficient solar energy storage, smart battery management, and reliable backup power, helping you reduce electricity costs and optimise self-consumption. Solis S6 AC Charger Features 125A / 6kW max charge/discharge rating for fast energy cycling AI Optimised cloud-based, automated energy management assistant Supports 6 different battery charging and discharging modes Real-time battery monitoring for optimal performance Remote upgrades for system improvements without onsite visits Peak shaving functionality in ‘self-use’ and ‘generator’ modes Low power standby mode minimises overall system energy usage Advanced battery protection to extend battery life Specifications: Rated Power: 5,000W Weight: 24.5kg Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Hybrid Inverter Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Kit includes the selected Solis Hybrid inverter either 3.6, 5 or 6kW Solis 5G Hybrid AI Optimised Inverter with Dyness 10.24kWh G2 Battery The Solis 5G Hybrid Inverter is a next-generation energy management solution. Paired with the Dyness10.24kWh G2 Battery, this system offers reliable, flexible, and future-proof energy storage for UK homes and businesses. Solis 5G Hybrid Inverter Features Fanless IP65 design for quiet, durable operation AI Optimised cloud-based, automated energy management assistant High charging and discharging efficiency for maximum energy savings Multiple operating modes to maximise self-consumption and minimise grid reliance Intelligent BMS (Battery Management System) for safe, efficient performance 24-hour real-time energy management with smart controls Remote monitoring and upgrades via app and online portal Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk 3.6Kw Data Sheet Sunsynk 5Kw Data Sheet Sunsynk 8Kw Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Kit includes the selected Sunsynk hybrid inverter either 3.6, 5 or 8kW Sunsynk collection page for further information and documents Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability.  Sunsynk 10 / 12kW 1ph Data Sheet Sunsynk 16kW 1ph Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty   10/12/16kW 1ph Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery options The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Interactive display with RS485 & Wi-Fi 5-Year Warranty Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of installed home battery storage packages visit our collection page here To request a bespoke quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk 3ph Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty   8/10/12kW 3ph Sunsynk Hybrid Inverters with Dyness 10.24kWh Powerbox Battery options The Sunsynk hybrid inverter is a flexible, high-performance energy management system that allows you to buy electricity at low rates and sell back to the national grid via SEG payments. Its API integration with Octopus Agile, Flux & Go ensures optimal cost savings and energy efficiency for your home or business. Paired with the Dyness 10.24kWh battery, this system delivers reliable, versatile energy storage compatible with a wide range of inverters. Cables for battery-to-inverter and battery-to-battery connections are included for seamless installation. Sunsynk Hybrid Inverter Features Dual MPPT design for maximum solar efficiency Compatible with Lithium-ion and Lead Acid batteries 5-year warranty as standard Anti-islanding protection for safety Fully programmable power export Automatic switching from grid-tied to off-grid mode Supports parallel operation of up to 16 units with the same firmware Interactive display with RS485 & Wi-Fi 5-Year Warranty Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg  

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus Hybrid Data Sheet Dyness PowerBox G2 Datasheet Dyness PowerBox G2 Warranty Solis 8/10kW Hybrid PLUS AI Optimised Inverter with Dyness 10.24kWh G2 Battery   The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus Hybrid Data Sheet Fogstar Battery stack Datasheet Fogstar Battery stack Installation manual Please note that the Fogstar modular battery is due into stock around end May 2026 Solis 8/10kW Hybrid PLUS AI Optimised Inverter with Fogstar Energy 48.3-64.4kWh Modular Battery Stack    The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features The Fogstar Energy Modular Battery Stack (FE51.2-48.3) is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 3-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. With the ability to scale up to 1.23MWh, IP65 protection, integrated heating and built-in fire suppression, this system is engineered for reliable performance in demanding UK environments. System Overview Each 48.3kWh stack consists of: • 3 × 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand. Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Fully Scalable Architecture • 1 × stack = 48.3kWh• Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus 6kW Hybrid Data Sheet  Solis Plus 8-10kW Hybrid Data Sheet Fogstar 16.1kWh ECO Datasheet Solis 6/8/10kW Hybrid PLUS AI Optimised Inverter with UK based Fogstar Energy ECO 16.1kWh Battery    The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.

Fox H1 3.7kW Hybrid Inverter + EP12 11.52kWh HV Battery Bundle #2: FE-3.7-EP12-WG FOX EP12 Data Sheet  FOX EP12 User Manual  FOX ESS EP12 Installation Guide  FOX Warranty  Fox H1 3.7kW Datasheet  Fox H1 3.7kW Manual  Fox H1 3.7kW Installer Guide  Fox H1 3.7kW G100 Certification  Fox Battery Sizing Guide Fox H1 3.7kW Hybrid Inverter + EP12 11.52kWh HV Battery Bundle Part No: FE-3.7-EP12-WG The Fox H1 3.7kW Hybrid Inverter + EP12 11.52kWh High-Voltage Battery Bundle delivers a complete, high-performance solar and storage solution for residential properties. Combining intelligent energy management with scalable lithium storage, this system is designed to maximise solar self-consumption, reduce grid reliance, and provide backup capability. This bundle pairs the advanced Fox H1 3.7kW Hybrid Inverter Gen 2 with the high-capacity Fox ESS EP12 11.52kWh 384V Battery, creating a fully integrated high-voltage storage system. What’s Included in This Bundle 1 × Fox ESS EP12 11.52kWh 384V High-Voltage LFP Battery (with integrated heating element) 1 × Fox H1 3.7kW Hybrid Inverter with EPS – Single Phase Gen 2 This configuration is ideal for homeowners looking for a powerful yet compact hybrid storage system. Fox ESS EP12 11.52kWh High-Voltage Battery The EP12 is a high-voltage lithium iron phosphate (LFP) battery designed for enhanced safety, long cycle life, and strong discharge capability. With a total capacity of 11.52kWh, it provides substantial storage for medium to larger homes with higher evening consumption. Key battery features include: 11.52kWh total capacity 384V high-voltage architecture Integrated heating element for improved low-temperature performance LFP chemistry for enhanced safety and thermal stability Long lifecycle performance Compatible with Fox high-voltage hybrid inverters The integrated heating element ensures stable operation in colder UK climates, supporting year-round performance. Fox H1 3.7kW Hybrid Inverter – Gen 2 The Fox H1 3.7kW Gen 2 is a single-phase hybrid inverter engineered for seamless integration between solar PV, battery storage, and grid supply. Inverter highlights include: 3.7kW AC output (single phase) Integrated battery management compatibility EPS (Emergency Power Supply) functionality High efficiency conversion Dual MPPT for flexible string design Remote monitoring via Fox Cloud platform The EPS functionality allows essential circuits to remain powered during grid outages when correctly configured. Intelligent Energy Management Together, this bundle enables: Increased solar self-consumption Reduced electricity bills through smart charge/discharge control Compatibility with time-of-use tariffs Optional backup power capability (EPS configuration required) The high-voltage architecture improves overall system efficiency while reducing current losses compared to low-voltage systems. Ideal Applications Residential solar + storage installations Homes with medium to high evening electricity usage Properties using flexible or time-of-use energy tariffs Installations requiring future-ready hybrid capability Key Technical Overview Inverter Output Power: 3.7kW (Single Phase) Type: Hybrid with EPS MPPT: Dual Battery Capacity: 11.52kWh Nominal Voltage: 384V Chemistry: Lithium Iron Phosphate (LFP) Integrated Heating Element: Yes Professional Installation Required This system must be installed by a qualified electrician or certified solar installer. All installations must comply with current UK wiring regulations and local electrical standards.

Fox H1 5.0kW Hybrid Inverter + EP12 11.52kWh HV Battery Bundle #2: FE-3.7-EP12-WG FOX EP12 Data Sheet  FOX EP12 User Manual  FOX ESS EP12 Installation Guide  FOX Warranty  Fox H1 5.0kW Datasheet  Fox H1 5.0kW Manual  Fox H1 5.0kW Installer Guide  Fox H1 5.0kW G100 Certification  Fox Battery Sizing Guide Fox H1 5.0kW Hybrid Inverter + EP12 11.52kWh HV Battery Bundle Part No: FE-5.0-EP12-WG The Fox H1 5.0kW Hybrid Inverter + EP12 11.52kWh High-Voltage Battery Wholegreen Package provides a powerful, fully integrated solar and storage solution for residential properties with higher energy demands. Designed to maximise solar self-consumption and reduce grid reliance, this high-voltage system delivers intelligent energy management, strong discharge capability, and optional backup functionality. This bundle combines the advanced Fox H1 5.0kW Hybrid Inverter Gen 2 with the high-capacity Fox ESS EP12 11.52kWh 384V Battery, forming a complete, high-efficiency PV and storage package. What’s Included in This Bundle 1 × Fox ESS EP12 11.52kWh 384V High-Voltage LFP Battery (with integrated heating element) 1 × Fox H1 5.0kW Hybrid Inverter with EPS – Single Phase Gen 2 This configuration is ideal for households with larger PV arrays or higher evening consumption. Fox ESS EP12 11.52kWh High-Voltage Battery The EP12 is a high-voltage lithium iron phosphate (LFP) battery engineered for enhanced safety, long service life, and reliable performance. With a total capacity of 11.52kWh, it provides substantial storage to support higher household energy usage. Key battery features include: 11.52kWh storage capacity 384V high-voltage architecture Integrated heating element for improved cold-weather operation LFP chemistry for enhanced thermal stability and safety Long cycle life and stable degradation performance Seamless compatibility with Fox high-voltage hybrid inverters The integrated heating element ensures consistent performance in colder UK climates, protecting battery longevity and reliability. Fox H1 5.0kW Hybrid Inverter – Gen 2 The Fox H1 5.0kW Gen 2 is a single-phase hybrid inverter designed to integrate solar PV, battery storage and grid supply within one intelligent system. Inverter highlights include: 5.0kW AC output (single phase) Dual MPPT for flexible PV string configuration High conversion efficiency Integrated EPS (Emergency Power Supply) capability Full compatibility with high-voltage Fox batteries Remote monitoring via Fox Cloud platform The higher 5.0kW output makes this inverter suitable for properties with increased load requirements or larger solar arrays. Intelligent Energy Management & Savings This bundle enables homeowners to: Increase solar self-consumption Reduce electricity bills through smart charge and discharge scheduling Optimise savings with time-of-use tariffs Maintain power to essential circuits during outages (EPS configuration required) The high-voltage battery architecture improves system efficiency and reduces current losses compared to low-voltage alternatives. Ideal Applications Residential solar + storage systems with higher demand Homes installing 4–6kW+ PV arrays Properties using flexible or dynamic electricity tariffs Installations requiring future-ready hybrid capability Key Technical Overview Inverter Output Power: 5.0kW (Single Phase) Type: Hybrid with EPS MPPT: Dual Battery Capacity: 11.52kWh Nominal Voltage: 384V Chemistry: Lithium Iron Phosphate (LFP) Integrated Heating Element: Yes Professional Installation Required This system must be installed by a qualified electrician or certified solar installer in accordance with UK wiring regulations and local electrical standards. Incorrect installation may affect system performance and warranty compliance.

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis S6 5kW  Data Sheet Solis S6 5kW Warranty Fogstar 16.1kWh ECO Datasheet Solis Single Phase 5kW Low Voltage AC-Coupled Inverter | AI Optimised  The Solis 5kW Low Voltage AC-Coupled Inverter is designed for reliable, efficient home energy storage and solar integration. Perfect for single-phase installations, this inverter ensures safe, flexible, and high-performance operation with modern lithium-ion battery systems.  Solis Meter 1ph Eastron with external CT - SDM120CT required for accurate energy reading Key Features High charge/discharge capacity: 125A / 6kW maximum rating. Flexible charging schedules: Supports 6 different battery charging and discharging times. Real-time battery monitoring: Keep track of battery health and performance. Remote upgrades: Easily update firmware via internet connectivity. Peak shaving support: Optimise energy use in self-use and generator modes. Low standby power: Minimises overall system energy consumption. Enhanced battery protection: Prolongs battery lifespan and ensures safe operation. Specifications Rated Power: 5,000 W Weight: 24.5 kg Max Current: 40 A Number of Phases: Single-phase (1) Compatibility: Works with Solis Low Voltage AC-coupled battery systems Fogstar Energy 48V 16.1kWh ECO Available in Black or white subject to stock availability Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis 10kW Datasheet Solis 10kW Warranty Fogstar Battery stack Datasheet Fogstar Battery stack Installation manual *PLEASE NOTE THIS FOGSTAR MODULAR BATTERY IS CURRENTLY DUE AROUND END OF MAY Solis 10/15kW Hybrid PLUS AI Optimised Inverter with Fogstar Energy 48.3-64.4kWh Modular Battery Stack    Solis 10-15kW Three-Phase Low Voltage Hybrid Inverter The Solis 10-15kW Three-Phase Low Voltage Hybrid Inverter is a powerful and flexible energy storage solution designed for advanced residential and light commercial applications. Engineered for stability, scalability and intelligent backup, this inverter delivers reliable performance even in challenging grid or generator conditions. With support for high-current PV modules, dual backup outputs and microgrid operation, it provides installers and system owners with a future-ready platform for modern solar-plus-storage systems across the UK. Advanced Backup & Energy Security This inverter is generator-compatible, allowing extended backup duration during grid outages. It supports dual backup ports, enabling intelligent separation of critical and non-critical loads for optimal energy management. With a rapid response to overloads and weak grid conditions, connected loads remain stable and uninterrupted. Key backup capabilities include: Generator compatibility for extended outage protection AI Optimised cloud-based, automated energy management assistant Dual backup ports for intelligent load prioritisation 200% overload capability for up to 10 seconds Stable operation during weak grid or generator fluctuations High-Performance PV & Battery Integration Designed to handle today’s high-power PV modules, the inverter supports a maximum PV input current of 20A, making it compatible with panels from all major manufacturers. On the battery side, a high DC charge and discharge capacity allows greater utilisation of surplus solar generation. Energy handling features include: Support for high-current PV modules across any brand Battery DC charge/discharge current up to 290A Increased self-consumption of solar energy Microgrid & Load Flexibility Multiple units can operate together to form a microgrid, enhancing resilience and scalability for larger installations. The inverter also supports unbalanced and half-wave loads on both grid and backup ports, ensuring compatibility with a wide range of real-world electrical loads. System flexibility highlights: Multi-inverter microgrid capability Supports unbalanced and half-wave loads Reliable performance in complex three-phase systems The Fogstar Energy Modular Battery Stack (FE51.2-48.3) is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 3-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. With the ability to scale up to 1.23MWh, IP65 protection, integrated heating and built-in fire suppression, this system is engineered for reliable performance in demanding UK environments. System Overview Each 48.3kWh stack consists of: • 3 × 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand. Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Fully Scalable Architecture • 1 × stack = 48.3kWh• Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support