Solax Solar Inverters

SOLAX CTSA016 100A CT Clamp #2: CTSA016 CT Clamp for X1-AC   CTSA016 100A CT Clamp Installation Manual

SolaX X1 Fit AC Coupled Battery charger Inverter HV 5.0kW #2: X1-FIT-G4-5.0 Storage Systems - Charger-Inverter #3: 4614 Sola X1 RetroFit Inverter Data Sheet Solax X1 RetroFit Inverter User Manual Solax X1 RetroFit Inverter Warranty Solax X1 RetroFit G99 Certification Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX X1 RetroFit AC Charger – Upgrade Your PV System Upgrade your existing solar PV system effortlessly with the SolaX X1 RetroFit AC Coupled Inverter Charger. Designed for single-phase inverters of any brand, this retrofit solution delivers high efficiency, flexibility, and reliable performance. Ideal for residential or commercial installations. Key Features High Efficiency – Up to 97% maximum efficiency for optimal energy usage Flexible Battery Support – Supports high-voltage batteries for reduced cable thickness Wide Compatibility – Works with any single-phase inverter brand Remote Monitoring – Monitor performance via SolaX XCloud Quiet & Low Maintenance – Natural cooling design for silent operation Technical Benefits Max Charge/Discharge – 6 kW Installation – Indoor or outdoor rated Smart Grid Ready – Supports grid trading with <0.5s response time Flexible Charging – Grid charging possible Connectivity – WiFi or LAN stick available separately Battery Requirements Minimum of 1 Solax battery per X1 AC inverter Maximum of 3 batteries, all must be same capacity (cannot mix 4.5kWh and 6.3kWh batteries) Compliance UK tested and certified under G98/G99 standards Requires latest firmware and hardware version for compliance The SolaX X1 RetroFit AC Charger is the perfect solution to extend the life and capabilities of your PV system while providing smart, high-efficiency energy management.

SolaX X1 3kW G4-V2 Hybrid inverter with WiFi #2: X1-HYBRID-G4-3.0-V2#3: 4329 SolaX X1 G4 Hybrid 3.0D (inc. WiFi dongle) £995 +VAT For a full list of SolaX products click here. SolaX 3kW Data Sheet SolaX 3kW Installation Manual SolaX 3kW Warranty SolaX 3kW G98 Certificate   SolaX G4 Hybrid/AC Charger Inverter – 3.0kW (4th Generation) The SolaX G4 Hybrid/AC Charger Inverter is the fourth generation of SolaX’s highly successful inverter range, building on the proven reliability of the G3 series while introducing new performance enhancements. Designed for both residential and light commercial use, it delivers efficient solar power management with rapid charging and robust durability. Key Features of the G4 Series Supports up to 150% PV Oversizing – maximise solar array capacity for greater energy harvest Fast Charging Speeds – can almost fully charge a Triple Power battery in just one hour High Reliability – passed HALT testing, extreme temperature cycles, salt spray, and full-load ageing tests Quick Installation – 30-minute install reduces time on-site Element Protection – operates at full load in harsh conditions, down to -30°C Proven Durability – engineered for long-lasting performance in demanding environments Technical Specifications Weight: 24 kg Rated Power: 3,000 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 4,500 W Max AC Power (5 min): 3,300 W Surge AC Power (1 sec): 3,900 W Max DC Current: 28 A DC Inputs: 2 MPPT Quantity: 2 Connector Type: SUNCLIX (2 included) Efficiency (Euro): 97% Transformer: None Integrated DC Switch: No Warranty: 10 Years Why Choose the SolaX G4 Hybrid/AC Charger? The SolaX G4 series is designed for homeowners and installers who need high efficiency, rapid charging, and maximum reliability in a compact solution. With support for PV oversizing, extreme temperature operation, and cutting-edge battery integration, it offers a future-proof solar inverter system that is easy to install and simple to manage.

SolaX X1-FIT G4 7.5W (AC Coupled Inverter) #3: 4578 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty Solax X1 FIT G99 Certification   SolaX X1-FIT G4 7.5kW (AC Coupled Inverter) The SolaX X1-FIT G4 7.5kW AC Coupled Inverter Charger is designed to upgrade existing solar PV systems with reliable battery storage functionality. Compatible with any single-phase inverter brand, it delivers up to 97% efficiency and is built for both indoor and outdoor installations. With remote monitoring via the SolaX Cloud, homeowners can optimise energy usage and maximise savings. Benefits of the SolaX X1-FIT G4 Store excess solar energy for later use, reducing grid reliance Provides emergency power supply (EPS) during power cuts Compact, lightweight design with IP65 weatherproof rating Supports grid trading applications with rapid response times Compatible with high-voltage batteries, reducing cabling costs Advanced Features High Performance & Efficiency Max. efficiency: 97% Max. 7.5kW power output with 40A current AC attributes: Single-phase, 7500W max power Smart Energy Management VPP (Virtual Power Plant) function for smart grid trading Remote firmware upgrades and control Flexible peak shaving to balance grid demand Charging from the grid supported Reliable & Low Maintenance Natural cooling system for quiet operation Robust IP65 rating for indoor/outdoor use WiFi or LAN connectivity options available separately Technical Specifications AC Attributes Max Power: 7500W Max Current: 40A Phases: 1 System Performance Max Efficiency: 97% IP Rating: IP65 Weight: 23kg Dimensions: 482 × 417 × 181mm For a full list of SolaX products click here.

SolaX 5kW G4-V2 Hybrid Inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. SolaX X1-Hybrid G4 Single Phase Hybrid Inverter & Charge Controller Overview The SolaX X1-Hybrid G4 is a fourth-generation single-phase hybrid inverter and AC charge controller, designed to deliver high-efficiency energy conversion and fast battery charging for residential PV systems. This model builds on the success of the previous generation while adding enhanced features for reliability, oversizing, and speed. Key Features Supports up to 150% PV oversizing for maximum energy production High reliability: HALT-tested, extreme temperature (-30°C to +60°C), salt spray tested, full load aging tested Fast installation: Quick setup in approximately 30 minutes Rapid charging: Can nearly fully charge a Triple Power battery in just one hour Element protection: Operates efficiently in extremely cold conditions down to -30°C Wi-Fi included: Remote monitoring and control without additional equipment Specifications Weight: 24 kg Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 DC Fuses: None Connector Type: SUNCLIX Included Connectors: 2 Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years This inverter is ideal for residential PV systems seeking fast charging, reliable operation in harsh environments, and maximized solar self-consumption.

SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) #3: 4443 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty *Collections are not permitted due to health & safety regulations* SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) Introducing the latest SolaX Hybrid, the 4th generation, an advanced evolution of its 3rd-generation predecessor. This model not only retains all the essential features that made the previous version popular but also incorporates significant enhancements for an improved experience. The SolaX Hybrid stands out as a dual-function unit, efficiently combining the roles of a solar PV inverter and a battery storage controller. This innovative integration allows for the storage of excess solar energy in batteries, making it available for use when needed. It's crucial to note that the sizing of this hybrid system is akin to that of a standard inverter. For those considering an upgrade, the SolaX Hybrid is designed to seamlessly replace any existing inverter in a retrofit scenario, simplifying the transition to this more advanced system. Key Features: In-built EPS changeover switch Supports up to 150% oversizing Can work at full capacity down to -35C 30A Charge/discharge capability On-grid and off-grid use Includes WiFi Dongl AC attributes Max power: 7500W Max current: 40A Number of phases: 1 DC attributes Max power: 10000W Max Isc current: 16A Max voltage: 550VStart up voltage: 90V System Max efficiency: 97.6% IP rating: IP65 Weight: 23kg Dimensions: 482*417*181mm For a full list of SolaX products click here.

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 8kW #2: X3-FIT-8#3: 4748 Solax X3 8kW Inverter Data Sheet Solax X3 8kW Inverter User Manual Solax X3 8kW Inverter Warranty Solax X3 Inverter G99 Certification SolaX X3-FIT Series 3-Phase AC Coupled Hybrid Inverter Product Overview The SolaX X3-FIT Series is a fourth-generation, 3-phase AC coupled hybrid inverter designed for maximum solar energy utilisation. This retro-fit inverter directs excess solar energy into your battery for later use and can act as a backup power supply during grid outages, sending stored energy back to your home. Key Features Virtual Power Plant (VPP) Function Supports VPP integration for smart energy management Emergency Power Supply (EPS) Switchover time <10ms Provides up to 150% output for 60 seconds during power loss Flexible Energy Management Max. 110% nominal apparent AC power Flexible peak shaving for optimised energy use Optional three-phase unbalanced output Connectivity Compatible with WiFi V2.0 for SolaX Cloud monitoring WiFi stick required for remote monitoring Installation Notes For G100 applications, a software update is recommended Recommended use with SolaX CHINT three-phase CT energy meter Collections are not permitted due to health & safety regulations Technical Specifications AC Attributes Max power: 8,800 W Max current: 12.9 A Number of phases: 3 System Max efficiency: 98% IP rating: IP65 Dimensions & Weight Dimensions (H x W x D): 503 x 503 x 199 mm Weight: 30 kg

SolaX X3 RetroFit AC Coupled Battery 3ph Inverter 10kW #2: X3-FIT-10#3: 4749 Solax X3 Inverter Data Sheet Solax X3 Inverter User Manual Solax X3 Inverter Warranty Solax X3 Inverter G99 Certification Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here.   Three-Phase Retro Fit 10.0kW AC Coupled Inverter Product Features Compatible with high-voltage batteries IP65 protection rating Natural cooling for low maintenance Maximum efficiency up to 96% EPS Functionality This is the W version of the inverter with a built-in EPS function. An external backup box is required to fully utilise the EPS capability. Battery Compatibility Supports 2 to 4 Solax Triple Power Batteries (all batteries must be the same size per system). Scalability This inverter can be paralleled up to 5 units per site, offering flexible expansion for larger installations.