Solar Batteries

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Tesla Powerwall 3 Data Sheet  Tesla Backup Gateway 2 Datasheet Tesla Powerwall Warranty *Please note: Installations of the Tesla Powerwall are limited to the areas marked on the map The Tesla Powerwall 3 is an all-in-one solar-plus-storage solution, delivering 13.5 kWh usable capacity, up to 11.04 kW continuous AC output, and a built-in 20 kW DC solar inverter. Designed for UK homes seeking lower energy bills, reduced grid dependence, and seamless whole-home backup, Powerwall 3 stores energy from solar or the grid and manages it effortlessly through the Tesla App. Key Benefits of Tesla Powerwall 3 All-in-One Solar + Storage Powerwall 3 integrates battery storage and solar generation in one IP55-rated enclosure—no external inverter or combiner box required. Whole-Home Backup With up to 11.04 kW AC output and the ability to start heavy loads up to 185 A LRA, Powerwall 3 supports heat pumps, electric showers, ovens, and other demanding appliances during outages. Maximised Energy Efficiency 89% solar-to-battery-to-home/grid efficiency 97.5% direct solar-to-home/grid efficiencyThis ensures more of your generated energy is used where you need it. Engineered for UK Weather Powerwall 3 delivers reliable performance across all climates: Operating range: –20 °C to 50 °C Battery & electronics: IP67 rated Wiring compartment: IP55 rated Suitable for wall or floor mounting Scalable for Any Home Size Modular Storage & Power Scale your system as energy needs grow: Up to 4 Powerwall 3 units Up to 3 Expansion Modules Maximum system output: 44 kW AC Maximum total storage: 94.5 kWh Built-In Safety & Smart Connectivity Advanced Protection AFCI Isolation Monitor Interrupter Rapid Shutdown ±0.5% AC metering accuracy Connected Control Wi-Fi, Ethernet & LTE communication Full system visibility via the Tesla App Remote firmware updates and diagnostics Technical Specifications Electrical Performance Nominal grid voltage: 230 VAC (single-phase) Continuous AC output: 11.04 kW (48 A @ 230 VAC) Load start capability: 185 A LRA (ideal for heat pumps) Max solar input: 20 kW DC (60–550 V), 3 MPPTs Typical operating noise: < 50 dB(A) at 1 m Efficiency Round-trip efficiency: 89% Solar-to-home/grid efficiency: 97.5% Installation Made Simple The Powerwall 3 arrives as a 130 kg pre-wired cabinet (1105 × 609 × 193 mm) for fast installation.Just anchor, connect conductors, scan the QR code, and commission. Using the Tesla Installer Portal, the system automatically handles: Firmware updates System metering Adaptive load control Grid-approval documentation Tesla Backup Gateway The Tesla Backup Gateway 2 provides ultra-fast islanding, smart metering and full system monitoring for all Tesla Powerwall installations. Compact, IP55-rated and designed for rapid setup, the Gateway manages grid interaction, enables seamless backup power, and supports advanced load control for UK homes and businesses. Critical System Control for Powerwall Installations Sub-50 ms Backup Transition Installed between the grid supply and the Powerwall, the Backup Gateway 2 detects grid loss in less than 50 milliseconds, instantly switching the property to battery backup and ensuring uninterrupted power. Smart Metering & Advanced Monitoring The Gateway provides: Real-time site metering Solar and load monitoring Remote diagnostics and system visibility through the Tesla App This ensures optimal performance and fast troubleshooting without site visits. Compact, Installer-Ready Design Built for UK Installers Encased in a 584 × 380 × 127 mm IP55-rated enclosure, the Gateway ships:

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Luxpower Hybrid Data Sheet   Fogstar 16.1kWh ECO Datasheet *Please check Fogstar-LuxPower page for available inverter colours for different models Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Inverter details: Fogstar-LuxPowerTek 3.6/4/4.6/5/6kW  Fogstar-LuxPowerTek 8/10/12kW Fogstar-LuxPowerTek 14kW Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Luxpower Hybrid Data Sheet   Fogstar 16.1kWh IP65 Datasheet *Please check Fogstar-LuxPower page for available inverter colours for different models Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Inverter details: Fogstar-LuxPowerTek 3.6/4/4.6/5/6kW  Fogstar-LuxPowerTek 8/10/12kW Fogstar-LuxPowerTek 14kW Fogstar Energy 16.1kWh IP65 Solar Battery (48V LiFePO4) ⚡ High-Capacity Outdoor Battery Storage for UK Homes & Businesses The Fogstar Energy 16.1kWh IP65 Solar Battery is a premium, high-capacity 48V LiFePO4 battery system engineered for UK residential and commercial energy storage. Designed to operate reliably in harsh environments, this battery combines advanced safety features, intelligent thermal control, and wide inverter compatibility—making it one of the most versatile solar batteries available in the UK market. Perfect for off-grid systems, solar PV storage, and time-of-use energy optimisation, the Fogstar 16.1kWh battery delivers long lifespan, high performance, and exceptional value. ✅ Key Benefits 🔥 Built-in Fire Suppression System – Automatic aerosol fire protection for enhanced safety 🌧️ IP65 Rated (Indoor & Outdoor Use) – Fully sealed against dust and water ❄️ Integrated Heating System – Operates down to -20°C with charging from 0°C 🔌 Plug & Play Inverter Compatibility – Works with Victron, Solis, Growatt, Sofar, Goodwe & Pylontech 🔋 16.1kWh High Capacity – Ideal for homes with high energy usage or commercial systems 🔁 Up to 8,000 Cycles – Long lifespan with Grade A EVE LiFePO4 cells 📈 Expandable System – Connect up to 15 batteries in parallel ⚡ Integrated 250A DC Breaker – Built-in protection for safe operation 🧠 Smart Touchscreen Display – Real-time monitoring & protocol selection ⚙️ Active Cell Balancing (2A JK Balancer) – Maximises performance & lifespan 🏡 Built for UK Conditions The Fogstar Energy battery is specifically engineered to perform in UK climates, where temperature fluctuations and outdoor installations are common. Its automatic heating system ensures reliable operation in winter, while the IP65-rated enclosure protects against rain, dust, and environmental exposure—making it ideal for garages, outbuildings, and external wall installations. 🔥 Advanced Safety as Standard Safety is a major differentiator for Fogstar: Integrated aerosol fire suppression system High-quality LiFePO4 chemistry (safer than lithium-ion alternatives) Built-in DC breaker for fault protection Active balancing for cell stability

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Luxpower Hybrid Data Sheet  Fogstar Battery stack Datasheet *Please check Fogstar-LuxPower page for available inverter colours for different models Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Inverter details: Fogstar-LuxPowerTek 3.6/4/4.6/5/6kW  Fogstar-LuxPowerTek 8/10/12kW Fogstar-LuxPowerTek 14kW   Fogstar Energy 16.1-64.4kWh 51.2V Modular Battery Stack Scalable Commercial LiFePO₄ Energy Storage | IP65 | Integrated Heating & Fire Suppression The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 1-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution.   System Overview Each stack consists of: • 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability.  Luxpower 20Kw 3ph Hybrid Data Sheet  Fogstar Battery stack Datasheet  *Please check Fogstar-LuxPower page for available inverter colours for different models LuxPower TriP2-LB-3P 20kW Three-Phase Hybrid Inverter The Fogstar-LuxPower TriP2-LB-3P 20K is a powerful 20kW three-phase hybrid inverter designed for larger residential, commercial and light industrial energy storage installations. Combining high-capacity solar input with 48V low-voltage battery compatibility, three independent MPPTs, three-phase unbalanced load support and a dedicated generator port, the TriP2 provides a highly flexible platform for demanding solar and battery storage applications. With up to 30kW PV input, independent export control across each phase and the ability to connect up to 10 inverters in parallel, the TriP2 is equally suited to high-consumption properties and scalable commercial energy storage systems. Backed by an industry-leading 10-year warranty for long-term confidence and peace of mind. Key Features 20kW three-phase hybrid inverter Up to 30kW maximum PV input 3 independent MPPTs / 3 PV strings 48V low-voltage battery compatibility Supports three-phase unbalanced loads Independent grid export control on each phase Dedicated multi-function GEN port Generator automatic start/stop functionality AC coupling support Smart load management 8 configurable time-of-use charge/discharge periods Up to 10 units can be connected in parallel IP66-rated enclosure Integrated colour touchscreen Wi-Fi, RS485 and CAN communications 10-year warranty Solar PV Performance The TriP2-LB-3P 20K provides substantial PV capacity for larger solar installations. Maximum PV input power: 30kW Number of MPPTs: 3 PV strings: 3 Maximum AC output/export power: 20kW Maximum efficiency: 97.7% Fogstar Energy 16.1-64.4kWh 51.2V Modular Battery Stack Scalable Commercial LiFePO₄ Energy Storage | IP65 | Integrated Heating & Fire Suppression The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 1-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution.   System Overview Each stack consists of: • 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability.  Luxpower 20Kw 3ph Hybrid Data Sheet  Fogstar 16.1kWh ECO Datasheet *Please check Fogstar-LuxPower page for available inverter colours for different models   LuxPower TriP2-LB-3P 20kW Three-Phase Hybrid Inverter The Fogstar-LuxPower TriP2-LB-3P 20K is a powerful 20kW three-phase hybrid inverter designed for larger residential, commercial and light industrial energy storage installations. Combining high-capacity solar input with 48V low-voltage battery compatibility, three independent MPPTs, three-phase unbalanced load support and a dedicated generator port, the TriP2 provides a highly flexible platform for demanding solar and battery storage applications. With up to 30kW PV input, independent export control across each phase and the ability to connect up to 10 inverters in parallel, the TriP2 is equally suited to high-consumption properties and scalable commercial energy storage systems. Backed by an industry-leading 10-year warranty for long-term confidence and peace of mind. Key Features 20kW three-phase hybrid inverter Up to 30kW maximum PV input 3 independent MPPTs / 3 PV strings 48V low-voltage battery compatibility Supports three-phase unbalanced loads Independent grid export control on each phase Dedicated multi-function GEN port Generator automatic start/stop functionality AC coupling support Smart load management 8 configurable time-of-use charge/discharge periods Up to 10 units can be connected in parallel IP66-rated enclosure Integrated colour touchscreen Wi-Fi, RS485 and CAN communications 10-year warranty Solar PV Performance The TriP2-LB-3P 20K provides substantial PV capacity for larger solar installations. Maximum PV input power: 30kW Number of MPPTs: 3 PV strings: 3 Maximum AC output/export power: 20kW Maximum efficiency: 97.7% Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus S6 Hybrid Data Sheet  Solis Plus 8-10kW Hybrid Data Sheet   Fogstar 16.1kWh IP65 Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT.   Solis 3.6/5/6/8/10kW Hybrid PLUS AI Optimised Inverter with UK based Fogstar Energy ECO 16.1kWh Battery  Solis extended warranty available here The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Fogstar Energy 16.1kWh IP65 Solar Battery (48V LiFePO4) ⚡ High-Capacity Outdoor Battery Storage for UK Homes & Businesses The Fogstar Energy 16.1kWh IP65 Solar Battery is a premium, high-capacity 48V LiFePO4 battery system engineered for UK residential and commercial energy storage. Designed to operate reliably in harsh environments, this battery combines advanced safety features, intelligent thermal control, and wide inverter compatibility—making it one of the most versatile solar batteries available in the UK market. Perfect for off-grid systems, solar PV storage, and time-of-use energy optimisation, the Fogstar 16.1kWh battery delivers long lifespan, high performance, and exceptional value. ✅ Key Benefits 🔥 Built-in Fire Suppression System – Automatic aerosol fire protection for enhanced safety 🌧️ IP65 Rated (Indoor & Outdoor Use) – Fully sealed against dust and water ❄️ Integrated Heating System – Operates down to -20°C with charging from 0°C 🔌 Plug & Play Inverter Compatibility – Works with Victron, Solis, Growatt, Sofar, Goodwe & Pylontech 🔋 16.1kWh High Capacity – Ideal for homes with high energy usage or commercial systems 🔁 Up to 8,000 Cycles – Long lifespan with Grade A EVE LiFePO4 cells 📈 Expandable System – Connect up to 15 batteries in parallel ⚡ Integrated 250A DC Breaker – Built-in protection for safe operation 🧠 Smart Touchscreen Display – Real-time monitoring & protocol selection ⚙️ Active Cell Balancing (2A JK Balancer) – Maximises performance & lifespan 🏡 Built for UK Conditions The Fogstar Energy battery is specifically engineered to perform in UK climates, where temperature fluctuations and outdoor installations are common. Its automatic heating system ensures reliable operation in winter, while the IP65-rated enclosure protects against rain, dust, and environmental exposure—making it ideal for garages, outbuildings, and external wall installations. 🔥 Advanced Safety as Standard Safety is a major differentiator for Fogstar: Integrated aerosol fire suppression system High-quality LiFePO4 chemistry (safer than lithium-ion alternatives) Built-in DC breaker for fault protection Active balancing for cell stability

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty   Fogstar 16.1kWh IP65 Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)   Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Fogstar Energy 16.1kWh IP65 Solar Battery (48V LiFePO4) ⚡ High-Capacity Outdoor Battery Storage for UK Homes & Businesses The Fogstar Energy 16.1kWh IP65 Solar Battery is a premium, high-capacity 48V LiFePO4 battery system engineered for UK residential and commercial energy storage. Designed to operate reliably in harsh environments, this battery combines advanced safety features, intelligent thermal control, and wide inverter compatibility—making it one of the most versatile solar batteries available in the UK market. Perfect for off-grid systems, solar PV storage, and time-of-use energy optimisation, the Fogstar 16.1kWh battery delivers long lifespan, high performance, and exceptional value. ✅ Key Benefits 🔥 Built-in Fire Suppression System – Automatic aerosol fire protection for enhanced safety 🌧️ IP65 Rated (Indoor & Outdoor Use) – Fully sealed against dust and water ❄️ Integrated Heating System – Operates down to -20°C with charging from 0°C 🔌 Plug & Play Inverter Compatibility – Works with Victron, Solis, Growatt, Sofar, Goodwe & Pylontech 🔋 16.1kWh High Capacity – Ideal for homes with high energy usage or commercial systems 🔁 Up to 8,000 Cycles – Long lifespan with Grade A EVE LiFePO4 cells 📈 Expandable System – Connect up to 15 batteries in parallel ⚡ Integrated 250A DC Breaker – Built-in protection for safe operation 🧠 Smart Touchscreen Display – Real-time monitoring & protocol selection ⚙️ Active Cell Balancing (2A JK Balancer) – Maximises performance & lifespan 🏡 Built for UK Conditions The Fogstar Energy battery is specifically engineered to perform in UK climates, where temperature fluctuations and outdoor installations are common. Its automatic heating system ensures reliable operation in winter, while the IP65-rated enclosure protects against rain, dust, and environmental exposure—making it ideal for garages, outbuildings, and external wall installations. 🔥 Advanced Safety as Standard Safety is a major differentiator for Fogstar: Integrated aerosol fire suppression system High-quality LiFePO4 chemistry (safer than lithium-ion alternatives) Built-in DC breaker for fault protection Active balancing for cell stability

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus S6 Hybrid Data Sheet  Solis Plus 8-10kW Hybrid Data Sheet Fogstar 16.1kWh ECO Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT.   Solis 3.6/5/6/8/10kW Hybrid PLUS AI Optimised Inverter with UK based Fogstar Energy ECO 16.1kWh Battery  Solis extended warranty available here The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.   Includes SOL-METER-1PH-EASTRON 

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Fogstar 16.1kWh ECO Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)   Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.   Includes SOL-METER-1PH-EASTRON 

Fogstar Energy 48V 16.1kWh ECO Black Battery (2026 Version)  #12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes: 1.5m CAN & RS485 communication for smooth integration. 1.5m 50mm battery cable terminated with M8 ring lugs ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh. Technical Specifications Specification Details Rated Energy 16.1kWh Cell Configuration 1P16S Cell Type 3.2V 314Ah Grade A LiFePO₄ Nominal Voltage 51.2V Operating Voltage Range 42V – 58.2V Capacity 314Ah Cycle Life 8000 cycles @ 25°C, 50A (91% DOD) Charge Temperature -10°C to 40°C Discharge Temperature -20°C to 40°C Rated Charge Current 100A Rated Discharge Current 200A Maximum Discharge Current 200A Battery Management System Seplos 200A BMS Active Balancer JK 2A Weight 119.5kg ±3kg Dimensions (mm) 898.5 (H) × 415 (L) × 260 (W) Communication CAN & RS485 Pre-Loaded Protocols Victron, Sofar, Pylontech, Growatt, Solis, Goodwe Warranty 6 Years Customer Support 10 Years Ideal For • Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity Why Buy From ITS Technologies? At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence. Need help designing your system? Speak to our technical team today.

Fogstar Energy 48V 16.1kWh ECO White Battery (2026 Version)  #12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes: 1.5m CAN & RS485 communication for smooth integration. 1.5m 50mm battery cable terminated with M8 ring lugs ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh. Technical Specifications Specification Details Rated Energy 16.1kWh Cell Configuration 1P16S Cell Type 3.2V 314Ah Grade A LiFePO₄ Nominal Voltage 51.2V Operating Voltage Range 42V – 58.2V Capacity 314Ah Cycle Life 8000 cycles @ 25°C, 50A (91% DOD) Charge Temperature -10°C to 40°C Discharge Temperature -20°C to 40°C Rated Charge Current 100A Rated Discharge Current 200A Maximum Discharge Current 200A Battery Management System Seplos 200A BMS Active Balancer JK 2A Weight 119.5kg ±3kg Dimensions (mm) 898.5 (H) × 415 (L) × 260 (W) Communication CAN & RS485 Pre-Loaded Protocols Victron, Sofar, Pylontech, Growatt, Solis, Goodwe Warranty 6 Years Customer Support 10 Years Ideal For • Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity Why Buy From ITS Technologies? At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence. Need help designing your system? Speak to our technical team today.

Fogstar Energy IP65-Rated 16.1kWh 48V Solar Battery #12:Fog/En/IP/16/48V Fogstar 16.1kWh IP65 Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Fogstar Energy 16.1kWh IP65 Solar Battery (48V LiFePO4) ⚡ High-Capacity Outdoor Battery Storage for UK Homes & Businesses The Fogstar Energy 16.1kWh IP65 Solar Battery is a premium, high-capacity 48V LiFePO4 battery system engineered for UK residential and commercial energy storage. Designed to operate reliably in harsh environments, this battery combines advanced safety features, intelligent thermal control, and wide inverter compatibility—making it one of the most versatile solar batteries available in the UK market. Perfect for off-grid systems, solar PV storage, and time-of-use energy optimisation, the Fogstar 16.1kWh battery delivers long lifespan, high performance, and exceptional value. ✅ Key Benefits 🔥 Built-in Fire Suppression System – Automatic aerosol fire protection for enhanced safety 🌧️ IP65 Rated (Indoor & Outdoor Use) – Fully sealed against dust and water ❄️ Integrated Heating System – Operates down to -20°C with charging from 0°C 🔌 Plug & Play Inverter Compatibility – Works with Victron, Solis, Growatt, Sofar, Goodwe & Pylontech 🔋 16.1kWh High Capacity – Ideal for homes with high energy usage or commercial systems 🔁 Up to 8,000 Cycles – Long lifespan with Grade A EVE LiFePO4 cells 📈 Expandable System – Connect up to 15 batteries in parallel ⚡ Integrated 250A DC Breaker – Built-in protection for safe operation 🧠 Smart Touchscreen Display – Real-time monitoring & protocol selection ⚙️ Active Cell Balancing (2A JK Balancer) – Maximises performance & lifespan 🏡 Built for UK Conditions The Fogstar Energy battery is specifically engineered to perform in UK climates, where temperature fluctuations and outdoor installations are common. Its automatic heating system ensures reliable operation in winter, while the IP65-rated enclosure protects against rain, dust, and environmental exposure—making it ideal for garages, outbuildings, and external wall installations. 🔥 Advanced Safety as Standard Safety is a major differentiator for Fogstar: Integrated aerosol fire suppression system High-quality LiFePO4 chemistry (safer than lithium-ion alternatives) Built-in DC breaker for fault protection Active balancing for cell stability This makes it one of the safest home battery systems available in the UK today. ⚡ Inverter Compatibility (Plug & Play) The integrated PACE BMS includes pre-configured communication protocols for: Victron Solis Growatt Sofar Goodwe Pylontech-compatible systems No software downloads required—simply select your inverter via the LCD touchscreen. 📈 Scalable Energy Storage System Start with a single 16.1kWh unit and expand as needed: 🔗 Up to 15 batteries in parallel Ideal for: Large residential properties Commercial buildings Farms & off-grid applications 🛠️ Simple Installation Supplied with M8 ring terminals & protective covers Integrated wheels for easier handling (140kg unit) Compact footprint for flexible installation locations 📊 Technical Specifications Specification Details Battery Capacity 16.1kWh (16,076.8Wh) Nominal Voltage 51.2V Capacity 314Ah Cell Type EVE MB31 Grade A LiFePO4 Configuration 16S1P Cycle Life 8,000 cycles @ 80% DOD (95% DOD from Feb 2026) BMS PACE 200A Max Discharge Current 200A Balancer 2A JK Active Balancer DC Protection 250A Integrated Breaker Ingress Protection IP65 Operating Temperature Down to -20°C Weight 140kg Dimensions (mm) 500 (W) x 230 (D) x 830 (H) Display 4.3" TFT LCD Touchscreen Warranty 10 Years

Fogstar Energy 16.1-64.4kWh 51.2V Modular Battery Stack  #12: Fog/En/Stack Fogstar Battery stack Datasheet *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Scalable Commercial LiFePO₄ Energy Storage | IP65 | Integrated Heating & Fire Suppression The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 1-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. System Overview Each stack consists of: • 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand.   Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Seamless Inverter Integration CAN & RS485 communication enables compatibility with leading inverter brands including: • Victron• LuxPower• Sunsynk• Solis• Voltronic• Voltacon Ideal for hybrid, backup and off-grid applications. Fully Scalable Architecture • 1 × battery = 16.1kWh• Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support Technical Specifications Specification Details Model FE51.2 Rated Energy16.1 16.1kWh Nominal Voltage 51.2V Operating Voltage Range 43.2V – 57.6V Cycle Life 8,000 cycles @ 91% DOD Max Discharge Current 300A Max Charge Current 300A Working Temperature (Charge) 0–45°C (with heating) Working Temperature (Discharge) –20–45°C Ingress Protection IP65 Communication CAN / RS485 What’s Included The system is supplied with: ✔ Pre-Terminated 95mm² Battery Power Cables Heavy-duty, high-current cables supplied ready terminated for fast installation. Allows: • Direct battery-to-inverter connection• Connection via external DC busbar (where required) ✔ Amphenol-Terminated Battery Interconnect Cables • Secure locking connectors• Low-resistance current transfer• Reliable parallel stack expansion ✔ 1.5m Communication Cable Enables: • CAN / RS485 communication• Inverter control• System monitoring integration Installation Guidance The supplied 95mm² power cables are compatible with most inverter systems. In some installations: • Battery cables may be routed to a DC busbar• Manufacturer-supplied inverter leads may be used for final inverter connection

Sunsynk ACURE 8Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC2−8.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Sunsynk ACURE 5Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC1−5.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Sunsynk ACURE 3.6Kw On & Off grid Hybrid solar & wind Inverter WiFi Included   #5/20/22: SUNSYNK SUNC1−3.6LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Duracell solar battery Dura16 IP65 16kW LiFePO4 Battery #5: PD-16KWH-50V-1G Dura16 Data Sheet   The Duracell Energy Dura16 LV is a premium 16kWh lithium iron phosphate (LiFePO4) battery storage system, designed and engineered in the UK to deliver exceptional performance, safety, and long-term reliability. Built using advanced LiFePO4 battery technology, the Dura16 LV offers outstanding cycle life, enhanced thermal stability, and industry-leading safety, making it an ideal solution for solar energy storage, backup power, and energy tariff optimisation. With a sleek, modern design and IP65-rated weather protection, the Dura16 LV can be installed indoors or outdoors. Its modular architecture allows you to expand your energy storage capacity at any time, with support for up to 16 battery units in a single system. Monitor and manage your entire home energy ecosystem through the Duracell Energy Smart App. Seamlessly integrate your solar PV system, battery storage, EV chargers, and time-of-use electricity tariffs to maximise self-consumption and reduce energy bills. Key Benefits ✔ Premium LiFePO4 battery chemistry for maximum safety and longevity ✔ 16kWh battery capacity with 14.4kWh usable energy ✔ Industry-leading 8,000 cycle lifespan ✔ High-performance 130A charge and discharge capability ✔ Suitable for both indoor and outdoor installation (IP65 rated) ✔ Modular design – expand up to 16 battery units as your energy needs grow ✔ Smart monitoring and control via the Duracell Energy App ✔ Plug-and-play installation with all required cables included ✔ Master BMS auto-select functionality ✔ 1C charge and discharge performance ✔ Designed and engineered in the UK ✔ Comprehensive 10-year manufacturer warranty Technical Specifications Battery Chemistry: Lithium Iron Phosphate (LiFePO4) Nominal Capacity: 16kWh Usable Capacity: 14.4kWh Charge/Discharge Rate: 130A Charge/Discharge Performance: 1C / 1C Ingress Protection: IP65 Weight: 122kg Scalability: Up to 16 battery units Cycle Life: 8,000 cycles Warranty: 10 Years Why Choose the Dura16 LV? Whether you're looking to maximise solar self-consumption, reduce reliance on the grid, benefit from off-peak electricity tariffs, or provide reliable backup power, the Duracell Energy Dura16 LV delivers a powerful, scalable, and future-proof energy storage solution for homes and businesses alike.

Sigenergy SigenStor 3.6kW Hybrid Controller with 6-9kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy SigenStor Battery Datasheet  Sigenergy Single Phase 3.6kW Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor EC 3.6 kW Single Phase system is a complete, expandable, and future-ready solar energy storage solution designed for UK homes. With its intelligent modular design, the system combines power generation, storage, and smart energy management into one package. This storage package is ideal for homeowners that want to reduce electricity bills, and gain greater independence from the National Grid. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-3.6-SP – Sigenergy Sigenstor Energy Controller 3.6 kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications  Hybrid Controller (SIG-STOR-EC-3.6-SP) Rated Power (AC Output): 3,600 W Max AC Power (5 Minutes): 3,680 W Surge AC Power (1 Second): 3,680 W Max DC Power (PV Input): 7,360 W Min. MPPT Voltage: 50 V Max. MPPT Voltage: 550 V DC Startup Voltage: 100 V DC Shutdown Voltage: 600 V Max Input Voltage: 600 V Max DC Current: 32 A Max DC Inputs: 2 MPPT Trackers: 2 DC Fuses: None Integrated DC Switch: Yes Connector Type: MC4 Included Connectors: 4 Transformer: None (transformerless design) European Efficiency: 97 % Ingress Protection: IP66, suitable for outdoor installation Warranty: 10 years   Why Choose the Sigenergy Sigenstor 3.6kW? All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStor 5kW Hybrid Controller with 6-9.04kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy SigenStor Battery Datasheet  Sigenergy Single Phase Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For installed battery packages page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor Energy Controller 5.0kW Single Phase (Part No: SIG-STOR-EC-5.0-SP) is a cutting-edge hybrid inverter designed to revolutionise how UK households generate, store, and consume solar energy. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-5.0-SP – Sigenergy Sigenstor Energy Controller 5kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications Product Information Product Name: Sigenergy Sigenstor Energy Controller 6.0kW Single Phase Part Number: SIG-STOR-EC-5.0-SP System Type: Hybrid Inverter / Energy Controller Performance & Capacity Rated Output: 5.0kW Single Phase Power Range: 3.0 – 5.0 kW DC/AC Ratio: Up to 2  Safety & Reliability Protection: DC ground-fault protection Ingress Protection: IP66 — weatherproof and dustproof Resilience: Multi-source black start Why Choose the Sigenergy Sigenstor   All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStor 6kW Hybrid Controller with 6-9.04kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy SigenStor Battery Datasheet  Sigenergy Single Phase Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For installed battery packages page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor Energy Controller 6.0kW Single Phase (Part No: SIG-STOR-EC-6.0-SP) is a cutting-edge hybrid inverter designed to revolutionise how UK households generate, store, and consume solar energy. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-6.0-SP – Sigenergy Sigenstor Energy Controller 6kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications Product Information Product Name: Sigenergy Sigenstor Energy Controller 6.0kW Single Phase Part Number: SIG-STOR-EC-6.0-SP System Type: Hybrid Inverter / Energy Controller Performance & Capacity Rated Output: 6.0kW Single Phase Power Range: 3.0 – 6.0 kW DC/AC Ratio: Up to 2  Safety & Reliability Protection: DC ground-fault protection Ingress Protection: IP66 — weatherproof and dustproof Resilience: Multi-source black start Why Choose the Sigenergy Sigenstor   All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStor 8kW Hybrid Controller with 6-12kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy SigenStor Battery Datasheet  Sigenergy Single Phase Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For installed battery packages page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor Energy Controller 8.0kW Single Phase (Part No: SIG-STOR-EC-8.0-SP) is a premium hybrid inverter designed to optimise solar energy generation, storage, and consumption in UK households. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-8.0-SP – Sigenergy Sigenstor Energy Controller 8kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications Product Details Product Name: Sigenergy Sigenstor Energy Controller 8.0 kW Single Phase Part Number: SIG-STOR-EC-8.0-SP System Type: Hybrid Inverter / Energy Controller Performance & Capacity Rated Output: 8.0kW (Single Phase) Power Range: 8.0 – 12.0kW Maximum Power Point Tracking (MPPT): 3 DC/AC Ratio: Up to 2 Safety & Reliability Protection: DC ground-fault protection Ingress Protection: IP66 — weatherproof and dustproof Resilience: Multi-source black start for uninterrupted power Why Choose the Sigenergy Sigenstor   All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStor 10kW Hybrid Controller with 6-9kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy Sigenstor Single Phase Hybrid Inverter Datasheet Sigenergy Single Phase Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For installed battery packages page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor Energy Controller 10.0 kW Single Phase (Part No: SIG-STOR-EC-10.0-SP) is a next-generation hybrid inverter that allows UK homeowners to generate, store, and manage solar energy more effectively. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-10-SP – Sigenergy Sigenstor Energy Controller 10kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications Product Details Product Name: Sigenergy Sigenstor Energy Controller 10.0 kW Single Phase Part Number: SIG-STOR-EC-10.0-SP System Type: Hybrid Inverter / Energy Controller Performance Rated Output: 10.0kW Single Phase Scalable Range: 8.0 – 12.0kW DC/AC Ratio: Up to 2 Protection & Reliability Ingress Protection: IP66 weather-resistant design Safety Features: DC ground-fault protection Backup Support: Multi-source black start Why Choose the Sigenergy Sigenstor   All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStor 12kW Hybrid Controller with 6-9kWh battery options   Brochure Sigenergy Home Energy Solution Sigenergy Sigenstor Single Phase Hybrid Inverter Datasheet Sigenergy Single Phase Hybrid User Manual  Sigenergy Energy Hybrid Warranty  Sigenergy Battery Warranty To view our full Sigenergy collection page click here For installed battery packages page click here For a bespoke quote complete our quote form here   Cost-Effective Package for Homeowners The Sigenergy Sigenstor Energy Controller 12 kW Single Phase (Part No: SIG-STOR-EC-12.0-SP) is a next-generation hybrid inverter that allows UK homeowners to generate, store, and manage solar energy more effectively. What’s Included: Energy Storage Components Core Components 1 x SIG-STOR-EC-12-SP – Sigenergy Sigenstor Energy Controller 10kW Single Phase Installation & Monitoring Accessories 1 x SIG-STOR-GM-KIT – Ground-Mount or wall-mount Installation Kit  1 x SIG-SENSOR-SP-CT-DH – Sigenergy Power Sensor Single Phase External CT DH Key Features 5-in-One Modular Energy System Combines in one platform: Solar Inverter EV DC Charger Battery PCS Battery Pack EMS Reduces installation complexity and integrates seamlessly into your home. Intelligent Energy Storage AI optimisation improves cycle life and ensures efficient energy use. Advanced Safety Protection Multi-layer safeguards against overvoltage, overcurrent, and thermal risks. Fire prevention and advanced thermal management built-in. Smart Monitoring & Control LED indicators for on-site status visibility. mySigen App for real-time monitoring, energy usage insights, and remote management. Quick & Flexible Installation Easy installation design with quick connectors. Compatible with parallel battery expansion for larger capacity systems. Benefits for UK Homeowners Lower Energy Bills Store excess solar energy and use it during peak electricity tariffs. Maximise self-consumption of renewable energy. Energy Independence Reduce reliance on the UK National Grid and safeguard against blackouts. Future-ready with EV charging compatibility.   Technical Specifications Product Details Product Name: Sigenergy Sigenstor Energy Controller 10.0 kW Single Phase Part Number: SIG-STOR-EC-10.0-SP System Type: Hybrid Inverter / Energy Controller Performance Rated Output: 12.0kW Single Phase Scalable Range: 8.0 – 14.0kW DC/AC Ratio: Up to 2 Protection & Reliability Ingress Protection: IP66 weather-resistant design Safety Features: DC ground-fault protection Backup Support: Multi-source black start Why Choose the Sigenergy Sigenstor   All-in-one solution for UK homeowners looking to cut energy costs. Flexible & scalable system that grows with your household needs. Safe & reliable, designed with multi-layer protection. Smart monitoring via app and LED indicators.

Sigenergy SigenStack MAIN Base Unit 0.5C Expandable Battery Foundation #2:   SIG-STACK-BASE-MAIN-0.5C  Battery Base  Sigenergy SigenStack Battery Datasheet  Sigenergy SigenStack Use Manual  Sigenergy SigenStack Installer Guide To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here Sigenergy SigenStack MAIN Base Unit 0.5C Built to Power Your SigenStack System: The Sigenergy SigenStack MAIN Base Unit 0.5C is the essential foundation for your modular battery storage setup. Designed for both residential and businesses, it supports up to five SigenStack 0.5C battery modules and includes integrated power and communication connections to simplify assembly and commissioning. Features Weather-Proof: IP66 rated, the base unit offers strong protection against dust, water ingress, and harsh environmental conditions. Modular Stacking & ScalabilitySupports up to 7 battery modules per stack, allowing easy system expansion and flexibility for growing energy needs. Efficient Footprint Design: Compact footprint, the base minimizes space usage while maximizing storage capacity—perfect for constrained installation sites. Integrated Safety Features: Enhanced safety through a built-in fire suppression system. Compatible with smart air-cooling solutions—ensuring optimal thermal management and protection for battery stacks. Structural StabilityReinforced and corrosion-resistant materials provide exceptional stability for multi-module stacks, ensuring durability in commercial and industrial settings. Fast, Tool-Free InstallationEnables plug-and-play assembly and quick setup without tools—greatly reducing installation time and labour costs. Low Maintenance RequirementsDesigned for minimal upkeep, the MAIN Base Unit ensures long-term reliability without frequent servicing—helping keep operational costs low.  

Dyness Powerbox G2 10.24kWh LV LFP Battery with Anti-Corrosion Weather Cover #2: DY-POWERBOX-G2-PACKStorage Systems - Li-ion Battery Pack Supplied with a specific Dyness weather cover (free of charge)  that is intended to be fitted over the top of the battery at the point of battery installation if installed outdoors, in order to maximise the life of the unit. Dyness PowerBox G2 Datasheet Dyness PowerBox G2 User Manual Dyness Compatibility List Dyness PowerBox G2 Warranty To view complete Dyness full range please visit our Dyness main page Dyness PowerBox G2 Residential Energy Storage The Dyness PowerBox G2 is a high-performance, low-voltage battery system designed for residential energy storage. Its slim 16.5cm design makes it ideal for installations in tight spaces while delivering reliable, scalable energy storage. Supporting up to 50 parallel units, the PowerBox G2 can provide 10.24 kWh to 512 kWh of energy coverage, making it perfect for homes of all sizes. Key Features Scalable and Flexible Flexible Expansion: Connect up to 50 units in parallel Energy Capacity: 10.24 kWh to 512 kWh Advanced Safety and Reliability Ultra-Safe Operation: Smart fire suppression system with 5-second response and automatic pressure relief Long-Term Durability: Uses LFP cells for maximum cycle life and reliability IP65 Protection: Resistant to dust and water ingress Performance and Environmental Adaptability Automatic Self-Heating: Charges down to -20°C and operates between -20°C to 55°C Strong Environmental Adaptability: Reliable performance in diverse climates Warranty 10-Year Manufacturer Warranty for peace of mind Technical Specifications Battery Performance Nominal Energy: 10,240 Wh Depth of Discharge: 95% Voltage: 51 V Power Ratings Continuous Discharge (Normal Use): 5,120 W Maximum Discharge Rate (5 Minutes): 10,240 W Surge Discharge Rate (15 Seconds): 10,240 W Maximum Charge Rate: 3,120 W Physical Specifications Weight: 98 kg Slim Design: 16.5 cm width for tight installation spaces  

Fox ESS PQ Series Hybrid Inverter & EQ5000 Battery Storage System #2: FE-PQ1-5.0-EQ-10 FOX PQ Data Sheet FOX PQ User Manual FOX ESS PQ Installation Guide FOX PQ Warranty   The Fox ESS PQ Series is a powerful next-generation single-phase hybrid solar and battery storage system, combining high-output hybrid inverter technology with scalable EQ5000 LFP battery storage. Available with 5kW, 8kW, 10kW or 12kW hybrid inverter options and a choice of 2 to 6 x EQ5000 battery modules, the system can be configured to suit a wide range of residential energy requirements. Designed for high solar generation, large household loads and increased energy independence, the PQ Series supports up to 200% PV oversizing, multiple MPPTs and high-current solar panels. Its modular stackable battery design also makes it easy to increase storage capacity as energy requirements grow. With an integrated 63A bypass and ultra-fast <4ms backup switchover, the PQ Series is also ideally suited to installations requiring comprehensive backup capability during a grid outage. Choose Your System Hybrid Inverter: 5kW, 8kW, 10kW or 12kW single-phase Battery Storage: 2–6 x Fox ESS EQ5000 LFP battery modules Modular, stackable design for a clean and compact installation Expandable battery capacity to suit changing energy requirements Key Benefits High-power 5kW, 8kW, 10kW & 12kW single-phase hybrid inverter options Scalable Fox ESS EQ5000 LFP battery storage Choice of 2–6 battery modules Up to 24kW PV input capacity Up to 4 MPPTs for flexible solar array design on 8kW+ models 20A PV input per string, compatible with modern high-power solar panels Up to 200% PV oversizing Integrated 63A bypass for full-house backup applications <4ms automatic backup switchover Parallel operation of up to 3 systems IP66-rated for indoor or outdoor installation Remote system monitoring through the FoxCloud app and web portal Ready for AI energy management and Virtual Power Plant (VPP) applications Modular design allows future battery expansion Advanced Solar & Battery Management The PQ Series is designed to maximise the amount of solar energy generated, stored and used within the property. Excess solar generation can be directed into the EQ5000 battery bank for use later in the day, helping to reduce grid consumption and maximise solar self-consumption. The system can also be configured around compatible time-of-use electricity tariffs, allowing batteries to be charged during lower-cost periods and discharged when grid electricity is more expensive. Whole-Home Backup Capability With an integrated 63A bypass and backup switchover of less than 4ms, the PQ Series provides a powerful platform for whole-home backup installations when designed and installed accordingly. Smart Monitoring FoxCloud provides remote access to system performance, including solar generation, battery state of charge, household consumption and grid import/export, allowing users to monitor and manage their energy system from their phone or web browser.  

Fox ESS PQ Series Hybrid Inverter & EQ5000 Battery Storage System #2: FE-PQ1-5.0-EQ-10 FOX PQ Data Sheet FOX PQ User Manual FOX ESS PQ Installation Guide FOX PQ Warranty   The Fox ESS PQ Series is a powerful next-generation single-phase hybrid solar and battery storage system, combining high-output hybrid inverter technology with scalable EQ5000 LFP battery storage. Available with 5kW, 8kW, 10kW or 12kW hybrid inverter options and a choice of 2 to 6 x EQ5000 battery modules, the system can be configured to suit a wide range of residential energy requirements. Designed for high solar generation, large household loads and increased energy independence, the PQ Series supports up to 200% PV oversizing, multiple MPPTs and high-current solar panels. Its modular stackable battery design also makes it easy to increase storage capacity as energy requirements grow. With an integrated 63A bypass and ultra-fast <4ms backup switchover, the PQ Series is also ideally suited to installations requiring comprehensive backup capability during a grid outage. Choose Your System Hybrid Inverter: 5kW, 8kW, 10kW or 12kW single-phase Battery Storage: 2–6 x Fox ESS EQ5000 LFP battery modules Modular, stackable design for a clean and compact installation Expandable battery capacity to suit changing energy requirements Key Benefits High-power 5kW, 8kW, 10kW & 12kW single-phase hybrid inverter options Scalable Fox ESS EQ5000 LFP battery storage Choice of 2–6 battery modules Up to 24kW PV input capacity Up to 4 MPPTs for flexible solar array design on 8kW+ models 20A PV input per string, compatible with modern high-power solar panels Up to 200% PV oversizing Integrated 63A bypass for full-house backup applications <4ms automatic backup switchover Parallel operation of up to 3 systems IP66-rated for indoor or outdoor installation Remote system monitoring through the FoxCloud app and web portal Ready for AI energy management and Virtual Power Plant (VPP) applications Modular design allows future battery expansion Advanced Solar & Battery Management The PQ Series is designed to maximise the amount of solar energy generated, stored and used within the property. Excess solar generation can be directed into the EQ5000 battery bank for use later in the day, helping to reduce grid consumption and maximise solar self-consumption. The system can also be configured around compatible time-of-use electricity tariffs, allowing batteries to be charged during lower-cost periods and discharged when grid electricity is more expensive. Whole-Home Backup Capability With an integrated 63A bypass and backup switchover of less than 4ms, the PQ Series provides a powerful platform for whole-home backup installations when designed and installed accordingly. Smart Monitoring FoxCloud provides remote access to system performance, including solar generation, battery state of charge, household consumption and grid import/export, allowing users to monitor and manage their energy system from their phone or web browser.  

Fox ESS PQ Series Hybrid Inverter & EQ5000 Battery Storage System #2: FE-PQ1-5.0-EQ-10 FOX PQ Data Sheet FOX PQ User Manual FOX ESS PQ Installation Guide FOX PQ Warranty The Fox ESS PQ Series is a powerful next-generation single-phase hybrid solar and battery storage system, combining high-output hybrid inverter technology with scalable EQ5000 LFP battery storage. Available with 5kW, 8kW, 10kW or 12kW hybrid inverter options and a choice of 2 to 6 x EQ5000 battery modules, the system can be configured to suit a wide range of residential energy requirements. Designed for high solar generation, large household loads and increased energy independence, the PQ Series supports up to 200% PV oversizing, multiple MPPTs and high-current solar panels. Its modular stackable battery design also makes it easy to increase storage capacity as energy requirements grow. With an integrated 63A bypass and ultra-fast <4ms backup switchover, the PQ Series is also ideally suited to installations requiring comprehensive backup capability during a grid outage. Choose Your System Hybrid Inverter: 5kW, 8kW, 10kW or 12kW single-phase Battery Storage: 2–6 x Fox ESS EQ5000 LFP battery modules Modular, stackable design for a clean and compact installation Expandable battery capacity to suit changing energy requirements Key Benefits High-power 5kW, 8kW, 10kW & 12kW single-phase hybrid inverter options Scalable Fox ESS EQ5000 LFP battery storage Choice of 2–6 battery modules Up to 24kW PV input capacity Up to 4 MPPTs for flexible solar array design on 8kW+ models 20A PV input per string, compatible with modern high-power solar panels Up to 200% PV oversizing Integrated 63A bypass for full-house backup applications <4ms automatic backup switchover Parallel operation of up to 3 systems IP66-rated for indoor or outdoor installation Remote system monitoring through the FoxCloud app and web portal Ready for AI energy management and Virtual Power Plant (VPP) applications Modular design allows future battery expansion Advanced Solar & Battery Management The PQ Series is designed to maximise the amount of solar energy generated, stored and used within the property. Excess solar generation can be directed into the EQ5000 battery bank for use later in the day, helping to reduce grid consumption and maximise solar self-consumption. The system can also be configured around compatible time-of-use electricity tariffs, allowing batteries to be charged during lower-cost periods and discharged when grid electricity is more expensive. Whole-Home Backup Capability With an integrated 63A bypass and backup switchover of less than 4ms, the PQ Series provides a powerful platform for whole-home backup installations when designed and installed accordingly. Smart Monitoring FoxCloud provides remote access to system performance, including solar generation, battery state of charge, household consumption and grid import/export, allowing users to monitor and manage their energy system from their phone or web browser.  

Fox ESS PQ Series Hybrid Inverter & EQ5000 Battery Storage System #2: FE-PQ1-5.0-EQ-10 FOX PQ Data Sheet FOX PQ User Manual FOX ESS PQ Installation Guide FOX PQ Warranty The Fox ESS PQ Series is a powerful next-generation single-phase hybrid solar and battery storage system, combining high-output hybrid inverter technology with scalable EQ5000 LFP battery storage. Available with 5kW, 8kW, 10kW or 12kW hybrid inverter options and a choice of 2 to 6 x EQ5000 battery modules, the system can be configured to suit a wide range of residential energy requirements. Designed for high solar generation, large household loads and increased energy independence, the PQ Series supports up to 200% PV oversizing, multiple MPPTs and high-current solar panels. Its modular stackable battery design also makes it easy to increase storage capacity as energy requirements grow. With an integrated 63A bypass and ultra-fast <4ms backup switchover, the PQ Series is also ideally suited to installations requiring comprehensive backup capability during a grid outage. Choose Your System Hybrid Inverter: 5kW, 8kW, 10kW or 12kW single-phase Battery Storage: 2–6 x Fox ESS EQ5000 LFP battery modules Modular, stackable design for a clean and compact installation Expandable battery capacity to suit changing energy requirements Key Benefits High-power 5kW, 8kW, 10kW & 12kW single-phase hybrid inverter options Scalable Fox ESS EQ5000 LFP battery storage Choice of 2–6 battery modules Up to 24kW PV input capacity Up to 4 MPPTs for flexible solar array design on 8kW+ models 20A PV input per string, compatible with modern high-power solar panels Up to 200% PV oversizing Integrated 63A bypass for full-house backup applications <4ms automatic backup switchover Parallel operation of up to 3 systems IP66-rated for indoor or outdoor installation Remote system monitoring through the FoxCloud app and web portal Ready for AI energy management and Virtual Power Plant (VPP) applications Modular design allows future battery expansion Advanced Solar & Battery Management The PQ Series is designed to maximise the amount of solar energy generated, stored and used within the property. Excess solar generation can be directed into the EQ5000 battery bank for use later in the day, helping to reduce grid consumption and maximise solar self-consumption. The system can also be configured around compatible time-of-use electricity tariffs, allowing batteries to be charged during lower-cost periods and discharged when grid electricity is more expensive. Whole-Home Backup Capability With an integrated 63A bypass and backup switchover of less than 4ms, the PQ Series provides a powerful platform for whole-home backup installations when designed and installed accordingly. Smart Monitoring FoxCloud provides remote access to system performance, including solar generation, battery state of charge, household consumption and grid import/export, allowing users to monitor and manage their energy system from their phone or web browser.  

Pylontech US5000-1C 4.8kWh Li-Ion Solar Battery 48V To view our full range of Pylontech batteries visit our collection page here.  Please note that US2000/C, US3000/C & US5000-1C are all compatible with each other. US5000 Datasheet US5000 Installation Manual US5000 Warranty US5000 Compatibility Sheet Connecting cables included as standard Pylontech US5000-1C 48V Lithium Battery – High-Capacity Modular Energy Storage The Pylontech US5000-1C is a 48V high-performance lithium battery from the US series, engineered for UK residential and commercial energy storage systems. With modular design, high usable capacity, and intelligent battery management, this unit provides efficient, safe, and scalable energy storage for solar PV and hybrid inverter setups. Key Features Modular & Expandable Design Modular system allows parallel connection of up to 16 units Supports large installations up to 72.96kWh without the need for an LV Hub Simplifies system expansion and reduces the number of required modules High Usable Capacity & Performance Usable capacity: 4,560 Wh with 95% Depth of Discharge (DoD) High energy density reduces the number of modules needed for desired capacity Long cycle life ensures reliable performance over years of use Intelligent Battery Management System (BMS) Protects against abnormal temperature, current, voltage, and state of charge (SoC) Compatible with RS485 and CAN communication protocols Optimises safety and efficiency for connected systems Compatibility & Installation Compatible with tier 1 inverter brands in the UK market Standard 7-year warranty, extendable to 10 years by registering online Warranty valid only if installed by a qualified electrician or authorised installer Technical Specifications Supplier Part No: US5000-1C Weight: 38 kg Battery Type: Lithium Ion Nominal Energy: 4,800 Wh Depth of Discharge: 95% Voltage: 48 V Continuous Discharge Rate (Normal Use): 2,400 W Maximum Discharge Rate (5 Minutes): 4,800 W Surge Discharge Rate (15 Seconds): 5,808 W Maximum Charge Rate (5 Minutes): 4,800 W Why Choose the Pylontech US5000-1C? High-capacity modular battery for scalable energy storage Intelligent BMS ensures safe and stable operation Reduced module count thanks to higher usable capacity Compatible with UK hybrid inverters and solar PV systems Extended warranty options for peace of mind ✅ Invest in the Pylontech US5000-1C 48V battery for a reliable, high-performance, and scalable energy storage solution designed for UK homes and commercial properties. To extend the warranty you have to register here: http://en.pylontech.com.cn/service/support

Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #2: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter Take control of your energy with the SunSynk 3.6kW AC ECCO Hybrid Inverter, a next-generation super hybrid system designed for efficiency, flexibility, and smart energy management. Compatible with Lithium-ion and Lead Acid batteries, this inverter integrates seamlessly with Octopus Agile, Flux, and Go for real-time energy optimisation. Key Features High Efficiency Hybrid Inverter: Rated AC output of 3.68kW with a 7kW MPPT, ideal for generating energy even during winter months Dual MPPT Design: Maximises energy harvest from solar arrays Battery Compatibility: Supports up to 50kWh of connected Lithium-ion or Lead Acid batteries Advanced Grid Integration: Fully programmable power export with automatic switching between Grid-Tied and Off-Grid mode Scalable System: Up to 16 units can be paralleled with the same firmware for larger installations IP65 Rated & Anti-Islanding Protection: Ensures durability and safety in all conditions Euro Efficiency: 99.9% for maximum energy utilisation Technical Specifications Rated Power: 3,600 W Min MPPT Voltage: 125 V | Max MPPT Voltage: 500 V DC Startup Voltage: 150 V | DC Shutdown Voltage: 125 V Max Input Voltage: 500 V | Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W | Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A | Max DC Inputs: 2 Connector: MC4 | Integrated DC Switch: Yes MPPT Quantity: 2 | Transformer: None Warranty: 5 years Sunsynk App & Data Logger Remote Control: Change all inverter settings from anywhere in the world Real-Time Monitoring: Monitor energy production, consumption, and battery status instantly Push Notifications: Receive alerts for power cuts, generator use, or battery activity Live Stats & Reporting: Access detailed energy statistics, generate custom reports, and track savings Octopus Agile & Flux Integration: Charge batteries at the cheapest rates and discharge when electricity prices are high, optimising savings Start using the Sunsynk Logger app via the Apple App Store or Google Play Store. Why Choose the SunSynk 3.6kW ECCO Hybrid Inverter? Optimises energy production for both self-consumption and export Advanced safety features and programmable settings Supports smart grid integration for cost savings Scalable and flexible for residential or commercial installations