Single Phase Hybrid Inverters

SolaX X1 3.7kW G4 Hybrid single phase battery storage Inverter HV   #2: X1-HYBRID-G4-3.7#3: 4336 Modbus Energy meter is required for SolaX charger to work WiFi stick is required for SolaX CloudFor a full list of SolaX products click here. SolaX G4 HV Single Phase Hybrid Inverter & Charge Controller – Reliable, High-Performance Energy Management The SolaX G4 HV Single Phase Hybrid Inverter and Charge Controller range represents the fourth generation of SolaX hybrid inverters. Building on the proven features of the previous G3 range, the G4 introduces advanced enhancements that maximise efficiency, reliability, and ease of installation for residential and commercial solar PV systems. Key Features Supports Up to 150% PV Oversizing – Connect more solar panels than ever before to ensure your system consistently produces the maximum energy possible. High Reliability in Harsh Environments – Tested to withstand extreme conditions including: High and low temperature extremes HALT (Highly Accelerated Life Test) Salt spray exposure Full-load aging tests Rapid Installation – Designed for fast setup, reducing on-site installation time to approximately 30 minutes. Fast Charging Speeds – Capable of nearly fully charging a triple-power battery in just one hour, allowing for greater energy storage in less time. Element Protection & Extreme Cold Operation – Operates at full load even in temperatures as low as -30°C, ensuring uninterrupted performance in all climates. Why Choose the G4 Range The SolaX G4 HV hybrid inverters combine cutting-edge technology with practical enhancements to provide: Increased PV system efficiency Reliable performance in demanding environments Simplified installation and maintenance Rapid energy storage and discharge for flexible energy management Applications Ideal for UK homeowners and installers looking for: Single-phase hybrid inverter solutions High-capacity battery integration Long-lasting, weather-resistant solar PV systems

SolaX 5kW G4-V2 Hybrid Inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. SolaX X1-Hybrid G4 Single Phase Hybrid Inverter & Charge Controller Overview The SolaX X1-Hybrid G4 is a fourth-generation single-phase hybrid inverter and AC charge controller, designed to deliver high-efficiency energy conversion and fast battery charging for residential PV systems. This model builds on the success of the previous generation while adding enhanced features for reliability, oversizing, and speed. Key Features Supports up to 150% PV oversizing for maximum energy production High reliability: HALT-tested, extreme temperature (-30°C to +60°C), salt spray tested, full load aging tested Fast installation: Quick setup in approximately 30 minutes Rapid charging: Can nearly fully charge a Triple Power battery in just one hour Element protection: Operates efficiently in extremely cold conditions down to -30°C Wi-Fi included: Remote monitoring and control without additional equipment Specifications Weight: 24 kg Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 DC Fuses: None Connector Type: SUNCLIX Included Connectors: 2 Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years This inverter is ideal for residential PV systems seeking fast charging, reliable operation in harsh environments, and maximized solar self-consumption.

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2 SolaX 3.7kW Data Sheet SolaX 3.7kW Manual SolaX 3.7kW Warranty SolaX 3.7kW G98 Certificate For a full list of SolaX products click here. SolaX G4-V2 HV Single Phase Hybrid Inverter & Charge Controller The SolaX G4-V2 represents the fourth generation of single-phase hybrid inverters and AC charge controllers, combining high efficiency, fast charging, and robust performance. Ideal for residential solar systems, this inverter maximises solar energy utilisation while providing smart battery management and enhanced reliability in harsh environments. Key Features Supports up to 150% PV Oversizing: Maximise solar input for consistent energy production. Fast Charging Speeds: Charge the Triple Power battery in almost one hour. High Reliability: Tested under extreme temperatures, HALT tested, salt spray tested, and full-load aging tested. Quick Installation: Reduced installation time with pre-configured connections and SUNCLIX connectors. Element Protection: Operates efficiently in temperatures as low as -30°C. Wi-Fi Included: Built-in Wi-Fi for remote monitoring and system control – no additional purchase required. Battery & PV Management: Integrated charge controller optimises solar and battery usage for maximum efficiency. Specifications Rated Power: 3,680 W Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Current: 28 A DC Inputs: 2 Connector Type: SUNCLIX (2 included) MPPT Quantity: 2 Euro Efficiency: 97% Integrated DC Switch: No Weight: 24 kg Warranty: 10 years

SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) #3: 4443 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) Introducing the latest SolaX Hybrid, the 4th generation, an advanced evolution of its 3rd-generation predecessor. This model not only retains all the essential features that made the previous version popular but also incorporates significant enhancements for an improved experience. The SolaX Hybrid stands out as a dual-function unit, efficiently combining the roles of a solar PV inverter and a battery storage controller. This innovative integration allows for the storage of excess solar energy in batteries, making it available for use when needed. It's crucial to note that the sizing of this hybrid system is akin to that of a standard inverter. For those considering an upgrade, the SolaX Hybrid is designed to seamlessly replace any existing inverter in a retrofit scenario, simplifying the transition to this more advanced system. Key Features: In-built EPS changeover switch Supports up to 150% oversizing Can work at full capacity down to -35C 30A Charge/discharge capability On-grid and off-grid use Includes WiFi Dongl AC attributes Max power: 7500W Max current: 40A Number of phases: 1 DC attributes Max power: 10000W Max Isc current: 16A Max voltage: 550VStart up voltage: 90V System Max efficiency: 97.6% IP rating: IP65 Weight: 23kg Dimensions: 482*417*181mm For a full list of SolaX products click here.

SolaX X1 G4 Hybrid Inverter 6kW #1:  X1-HYBRID-G4-6.0  #3: 4442 Solax X1 G4 Data Sheet Solax X1 G4 User Manual Solax X1 G4 Warranty Solax X1 G4 G99   SolaX X1 G4 Hybrid 6.0D – 4th Generation Hybrid Solar Inverter The SolaX X1 G4 Hybrid 6.0D represents the latest 4th generation of SolaX hybrid inverters, offering improved performance, enhanced reliability, and flexible energy storage options. Perfect for UK households and small commercial properties, this hybrid inverter allows you to store surplus solar energy in batteries for later use while retaining all the core features of previous generations. Key Features Intelligent Hybrid Functionality Stores excess solar energy in batteries for on-demand use. Functions as both an inverter and battery storage controller – ideal for retrofits or new installations. Supports up to 150% PV oversizing, ensuring maximum energy harvest. Built-in Safety & Reliability EPS (Emergency Power Supply) changeover switch included for backup during outages. Operates at full capacity in extreme temperatures down to -35°C. IP65-rated for outdoor installations, protecting against dust and water ingress. High Performance & Efficiency 30A charge/discharge capability for fast battery management. On-grid and off-grid operation for flexible system design. Max efficiency of 97.6%, ensuring optimal energy conversion. Connectivity & Monitoring Includes WiFi dongle for real-time system monitoring and remote management. Technical Specifications AC Attributes Max Power: 6,000 W Max Current: 28.6 A Number of Phases: 1 DC Attributes Max Power: 9,000 W Max Isc Current: 16 A Max Voltage: 600 V Start-up Voltage: 90 V System & Physical Max Efficiency: 97.6% IP Rating: IP65 Weight: 22 kg Dimensions: 482 × 417 × 181 mm

Fox H1 3.7kW Hybrid Inverter 1PH G2 #2: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter Fox H1 3.7kW Datasheet Fox H1 3.7kW Manual Fox H1 3.7kW Installer Guide Fox H1 3.7kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   3.68kW Fox Single Phase Hybrid/AC Inverter – Expandable Storage, Dual MPPT This 3.68kW hybrid/AC inverter is a compact, high-performance solution for residential solar energy systems. With dual MPPT tracking and an impressive 97% round-trip efficiency, it ensures maximum solar energy production and system reliability. Designed for scalability, it supports up to seven Cube batteries in series. Compatible with all Fox Cube and EP5/6/EP11/12 batteries, it’s the perfect choice for homes seeking reliable energy independence. Key Features 🔧 Easy Installation – compact and installer-friendly design ⚡ High Voltage & Dual MPPT – ensures optimal solar yield 💧 IP65 Protection – suitable for indoor or outdoor installation 📡 Remote Monitoring – manage your system anytime, anywhere 🔄 Scalable Storage – expand with up to 7 batteries (33.24kWh max.) 🌍 Compatible with Fox Cube & EP Series batteries 🎯 High Efficiency – 97% round-trip efficiency What’s Included ✅ CT Clamps ✅ WiFi Stick     Additional Requirements 📏 A second CT if another generator set (PV, wind, etc.) is present ⚡ A meter between inverter and incoming power connection point if distance >30m Technical Specifications Rated Power: 3,680 W Weight: 22 kg Min. PPT Voltage: 80 V Max. PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 600 V Max. Input Voltage: 600 V Max. DC Power (5 mins): 5,500 W Max. AC Power (5 mins): 3,680 W Surge AC Power (1 sec): 4,400 W Max. DC Current: 32 A Max. DC Inputs: 2 DC Fuses: No Connector Type: MC4 Included Connectors: 4 Euro Efficiency: 95.7% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers ✅ With its high-voltage design, dual MPPT efficiency, and scalability up to 33.24kWh storage, this hybrid/AC inverter is ideal for households looking to maximise solar self-consumption and future-proof their energy systems. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #2: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter Take control of your energy with the SunSynk 3.6kW AC ECCO Hybrid Inverter, a next-generation super hybrid system designed for efficiency, flexibility, and smart energy management. Compatible with Lithium-ion and Lead Acid batteries, this inverter integrates seamlessly with Octopus Agile, Flux, and Go for real-time energy optimisation. Key Features High Efficiency Hybrid Inverter: Rated AC output of 3.68kW with a 7kW MPPT, ideal for generating energy even during winter months Dual MPPT Design: Maximises energy harvest from solar arrays Battery Compatibility: Supports up to 50kWh of connected Lithium-ion or Lead Acid batteries Advanced Grid Integration: Fully programmable power export with automatic switching between Grid-Tied and Off-Grid mode Scalable System: Up to 16 units can be paralleled with the same firmware for larger installations IP65 Rated & Anti-Islanding Protection: Ensures durability and safety in all conditions Euro Efficiency: 99.9% for maximum energy utilisation Technical Specifications Rated Power: 3,600 W Min MPPT Voltage: 125 V | Max MPPT Voltage: 500 V DC Startup Voltage: 150 V | DC Shutdown Voltage: 125 V Max Input Voltage: 500 V | Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W | Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A | Max DC Inputs: 2 Connector: MC4 | Integrated DC Switch: Yes MPPT Quantity: 2 | Transformer: None Warranty: 5 years Sunsynk App & Data Logger Remote Control: Change all inverter settings from anywhere in the world Real-Time Monitoring: Monitor energy production, consumption, and battery status instantly Push Notifications: Receive alerts for power cuts, generator use, or battery activity Live Stats & Reporting: Access detailed energy statistics, generate custom reports, and track savings Octopus Agile & Flux Integration: Charge batteries at the cheapest rates and discharge when electricity prices are high, optimising savings Start using the Sunsynk Logger app via the Apple App Store or Google Play Store. Why Choose the SunSynk 3.6kW ECCO Hybrid Inverter? Optimises energy production for both self-consumption and export Advanced safety features and programmable settings Supports smart grid integration for cost savings Scalable and flexible for residential or commercial installations

Fox H1 5.0kW Hybrid Inverter G2 #3: 5984#2: FE-H1-5.0-G2 Storage Systems - Hybrid Inverter Fox H1 5.0kW Datasheet Fox H1 5.0kW Manual Fox H1 5.0kW Installer Guide Fox H1 5.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Single Phase Hybrid/AC Inverter – 5kW with Dual MPPT This single phase 5kW Hybrid/AC Inverter is designed for efficient solar energy storage and flexible system expansion. With dual MPPT technology and up to 97% round-trip efficiency, it ensures optimal solar production and seamless integration with compatible batteries. Perfect for home and small commercial installations, this inverter allows connection of up to seven batteries in series with a maximum storage capacity of 33.24kWh. Key Features ⚡ Easy Installation – streamlined setup process 🔋 High Voltage Compatibility – supports Cube & EP batteries 🌦️ IP65 Rated – suitable for indoor or outdoor installations 📡 Remote Monitoring – track performance anytime, anywhere 🌞 Dual MPPT Tracking – maximise solar energy harvest 🔄 High Efficiency – 97% round-trip efficiency for minimal energy loss What’s Included CT Clamps WiFi Stick Additional Requirements An extra CT clamp is required if connecting to another generator (PV, wind, etc.) A meter between the inverter and the incoming power connection point is required if distance exceeds 30m Technical Specifications Weight: 22 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 mins): 7,500 W Max AC Power (5 mins): 5,000 W Surge AC Power (1 sec): 5,500 W Max DC Current: 32 A Max DC Inputs: 2 DC Fuses: None Connectors: MC4 (x4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years 🔧 Ideal for system expansion – compatible with both new and existing solar setups.🌍 UK-compliant and built for long-term performance.   Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using HV2600 1M DC Extension Cable  

Duracell Energy Dura-i G3 3.6kW Hybrid Inverter  #5: Duracell Energy Dura-i 3.6kW PD-DH1P-3.6K-G3  Duracell G3 Inverter Data Sheet Duracell Inverter Manual Duracell Dura-i G3 3.6kW Single Phase Hybrid Inverter The Duracell Dura-i G3 3.6kW Hybrid Inverter is a compact, high-performance single-phase inverter designed for residential solar PV and battery storage systems. Compatible with the Duracell Dura battery range, it combines solar generation, battery storage and intelligent energy management within one integrated solution. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability helps maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing additional flexibility for larger or expandable energy storage installations. Key Features 3.6kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 75A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 3.6kW Rated AC Output Power 3.6kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 75A Maximum Discharge Current 75A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day, helping homeowners increase solar self-consumption and reduce reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 3.6kW model provides considerable flexibility when designing an oversized solar array, subject to the electrical limits of each MPPT and the overall system design. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes it suitable for customers looking for both solar and battery storage alongside improved household energy resilience. Built-In Smart Meter Unlike systems requiring a separate external energy meter, the Dura-i G3 features an integrated smart meter, helping simplify system design and installation while providing the inverter with the information required to intelligently manage household energy flows. Expandable System For installations requiring greater power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, making it suitable for both standard residential installations and larger energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

Duracell Energy Dura-i G3 5kW Hybrid Inverter   #5: PD−DH1P−5.0K−G3  Duracell G3 Inverter Data Sheet Duracell Inverter Manual   Duracell Dura-i G3 5kW Single Phase Hybrid Inverter The Duracell Dura-i G3 5kW Hybrid Inverter is a powerful and versatile single-phase hybrid inverter designed for residential solar PV and battery storage installations. Compatible with the Duracell Dura5 battery range, it combines solar generation, battery storage and intelligent energy management within one integrated system. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability can maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing a flexible and scalable solution for larger energy requirements. Key Features 5kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 100A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 5kW Rated AC Output Power 5kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 100A Maximum Discharge Current 100A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day or overnight, helping homeowners increase solar self-consumption and reduce reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 5kW model provides excellent flexibility when designing residential solar arrays, subject to the voltage, current and power limitations of each MPPT. High-Power Battery Charging The 5kW Dura-i G3 provides up to 100A battery charge and discharge current, enabling high battery power when paired with a suitably sized and configured Duracell Dura5 battery system. Actual charge and discharge power will depend on the battery configuration, battery voltage, state of charge, temperature and other system operating limits. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes it suitable for homeowners looking to combine solar PV and battery storage with increased protection against power interruptions. Built-In Smart Meter The Dura-i G3 incorporates a built-in smart meter, helping simplify installation by removing the requirement for a separate remote energy meter. The integrated monitoring allows the inverter to intelligently manage energy flows between the property, solar array, battery and electricity grid. Expandable System For installations requiring additional power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, providing flexibility for larger residential and light-commercial energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Fox Hybrid Single-Phase AC Inverter – Expandable Solar Energy Solution The Fox Hybrid Single-Phase AC Inverter combines high efficiency, flexible expansion, and smart monitoring to optimise your solar energy system. Compatible with Cube & EP5/11 batteries, this inverter is perfect for residential and small commercial installations. Key Features Easy Installation Quick and straightforward setup for hassle-free integration. High Voltage & Dual MPPT Dual MPPT design ensures maximum solar energy production. High round-trip efficiency of 97% maximises energy savings. Remote Monitoring Monitor your system in real-time via Wi-Fi for performance tracking and updates. Durable & Weatherproof IP65-rated for indoor and outdoor installation. What’s Included CT Clamps Wi-Fi Stick Additional Requirements Second CT clamp for additional generator sets (PV, wind, or others). Energy meter between inverter and incoming power connection if the distance exceeds 30m. Technical Specifications Weight: 23 kg Rated Power: 6,000 W Minimum MPPT Voltage: 80 V Maximum MPPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Maximum Input Voltage: 600 V Max DC Power (5 minutes): 9,000 W Max AC Power (5 minutes): 6,000 W Surge AC Power (1 second): 6,600 W Maximum DC Current: 32 A Maximum DC Inputs: 2 Connector Type: MC4 (4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years Why Choose the Fox Hybrid Inverter? The Fox Hybrid Single-Phase AC Inverter delivers reliable, efficient, and scalable solar power management. Its high voltage design, dual MPPT, and remote monitoring capabilities make it an ideal choice for homeowners and businesses looking to expand their solar energy systems while maximising efficiency and savings. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Solis 6.0kW Plus Single Phase S6 Low Voltage Hybrid Inverter #2: SOL-S6-EH1P6K-L-PLUS-5Y   Solis 6kW S6 Plus Inverter Data Sheet Solis S6 Hybrid Plus User Manual Solis Inverter 6kW Warranty   Solis S6-EH1P6K-L-PLUS 6kW Hybrid Inverter – Advanced Energy Storage & Backup Solution The Solis S6-EH1P6K-L-PLUS Hybrid Inverter is a powerful 6kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems. Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability. High Solar Utilisation & Future-Ready PV Compatibility 160% PV Oversizing Support The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day. Compatible with Next-Generation Solar Modules With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels. Reliable Backup & Off-Grid Capability Powerful Off-Grid Performance The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems. Seamless Grid Transition With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages. Flexible Battery Integration Wide Battery Compatibility Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions. Customisable Backup Settings Users can define battery backup levels to prioritise essential loads and extend available backup time. Intelligent Energy Management Smart Load Control Integrated smart load management ensures critical appliances receive priority power during backup operation. AI-Powered & VPP Ready Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services. System Expansion & Generator Support Parallel System Capability Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations. Generator Integration Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups. Built for Durability & Easy Operation Industrial-Grade LCD Display The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration. IP66 Environmental Protection With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments. Technical Specifications Electrical Performance Rated Power: 6,000 W Maximum PV Oversizing: 160% Maximum PV Input Current: 21 A Off-Grid Overload Capability: 200% for 10 seconds Battery Compatibility Supported Battery Voltage: 40V – 60V System Features Parallel Operation: Up to 6 units Grid Switching Time: <10 ms Generator Support: Yes Physical Details Supplier Part Number: SOL-S6-EH1P6K-L-PLUS-5Y Weight: 23 kg Why Choose the Solis S6-EH1P6K-L-PLUS Hybrid Inverter? ✔ 6kW hybrid inverter for solar and battery systems✔ 160% PV oversizing for increased solar generation✔ Seamless grid-to-backup switching in under 10ms✔ Wide battery compatibility (40V–60V)✔ Smart load management and AI-powered optimisation✔ Expandable system with up to 6 units in parallel✔ Durable IP66 protection for outdoor installations

Duracell Home Battery Dura-i G3 6kW Hybrid Inverter   #5: Duracell Energy Dura-i 6kW Hybrid Inverter PD-DH1P-6-G1  Duracell G3 Inverter Data Sheet Duracell Inverter Manual   Duracell Dura-i G3 6kW Single Phase Hybrid Inverter The Duracell Dura-i G3 6kW Hybrid Inverter is a powerful single-phase hybrid inverter designed for residential solar PV and battery storage installations. Compatible with the Duracell Dura battery range, it combines solar generation, battery storage and intelligent energy management within one integrated system. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability can maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing a flexible and scalable solution for larger residential energy requirements. Key Features 6kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 120A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 6kW Rated AC Output Power 6kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 120A Maximum Discharge Current 120A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day or overnight, helping homeowners increase solar self-consumption and reduce their reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 6kW model provides considerable flexibility when designing residential solar arrays, subject to the voltage, current and power limitations of the individual MPPTs. High-Power Battery Charging The 6kW Dura-i G3 provides up to 120A battery charge and discharge current, allowing considerably higher battery power than the 3.6kW model when paired with a suitably sized and configured Duracell battery system. Actual charge and discharge power will depend on the battery configuration, battery state of charge, temperature and other system operating limits. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes the system particularly suitable for homeowners looking to combine solar and battery storage with improved protection against power interruptions. Built-In Smart Meter The Dura-i G3 incorporates a built-in smart meter, helping simplify installation by removing the requirement for a separate remote energy meter. The integrated monitoring allows the inverter to intelligently manage energy flows between the property, solar array, battery and electricity grid. Expandable System For installations requiring additional power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, providing additional flexibility for larger residential and light-commercial energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

LuxpowerTek GEN3 3-6Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - WiFi dongle included Smart hybrid inverter set to the size required for G99. Once set upon installation this can't be changed #12: INV-LUX-GEN3-6KW-SPH-BLK Luxpower 3.6-6kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products   Fogstar-LuxpowerTek GEN3-LB-EU Hybrid Inverter - 3kW to 6kW Powerful next-generation hybrid inverter technology with dual MPPT solar inputs, high-current 48V battery support, generator integration and ultra-fast backup switching. The Fogstar-LuxpowerTek GEN3-LB-EU is a high-performance single-phase hybrid inverter designed for residential solar PV and battery storage systems. Available in 3kW, 3.6kW, 4kW, 4.6kW, 5kW and 6kW models, the GEN3 range is engineered for seamless integration with Fogstar 48V (51.2V) battery systems. With up to 12kW of solar PV input, two independent MPPTs and up to 125A battery charge and discharge capability, the GEN3 provides powerful energy management within a compact IP66-rated enclosure. Designed for both on-grid and off-grid applications, it also features generator integration, rapid 7ms backup switching and support for up to 16 inverters operating in parallel. Key Features 3kW, 3.6kW, 4kW, 4.6kW, 5kW and 6kW models Single-phase 230V hybrid inverter Compatible with Fogstar 48V (51.2V) batteries 2 independent MPPT solar inputs Up to 12kW maximum PV input Up to 125A battery charge and discharge current Up to 6kW battery charge and discharge power Generator input up to 12kW Fast 7ms backup switching Double-rated surge power for up to 1 second Supports up to 16 inverters in parallel On-grid and off-grid operation IP66-rated enclosure Integrated DC switch Type II AC and DC surge protection Wi-Fi, RS485 and CAN communication 5 or 10-year warranty options Fogstar Battery Integration The GEN3-LB-EU is designed around 48V low-voltage battery storage and provides seamless integration with compatible Fogstar Energy batteries. High-current battery support enables rapid charging from surplus solar generation, off-peak grid electricity or a connected generator. Battery specifications: Nominal battery voltage: 48V Battery operating range: 40-60V Maximum charge/discharge current: 80-125A, model dependent Maximum charge/discharge power: 3.6-6kW, model dependent Battery force wake-up from PV, grid or generator Solar PV Input Dual independent MPPTs provide flexible solar array design and allow separate PV strings to operate independently, making the GEN3 particularly suitable for east/west roofs, different roof pitches and multiple solar orientations. Maximum PV input: 6,600-12,000W, model dependent Rated PV input voltage: 360V Maximum PV input voltage: 530V MPPT operating range: 60-425V Start-up voltage: 50V Number of MPPTs: 2 MPPT configuration: 1 / 1 Maximum PV input current: 20A per MPPT Maximum PV short-circuit current: 32A per MPPT MPPT efficiency: 99.9% Generator Integration Integrated generator support allows the GEN3 to manage power from solar PV, battery storage, the electricity grid and a generator within one energy-management system. With generator input of up to 12kW, it provides additional flexibility for properties requiring greater energy independence or backup capability. Fast Backup Power The GEN3 provides rapid 7ms backup switching during a grid outage. Its double-rated surge capability for up to one second also provides additional support for appliances and electrical equipment with higher start-up power requirements. Expandable up to 16 Inverters For larger installations, up to 16 GEN3 inverters can operate in parallel. This provides a scalable platform for systems requiring greater inverter capacity and allows energy-storage installations to be expanded as requirements increase. Efficiency and Protection Maximum inverter efficiency: 97.0% EU efficiency: 95.9% MPPT efficiency: 99.9% Maximum charge/discharge efficiency: 95.0% Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Ground-fault monitoring Grid monitoring Integrated DC switch Type II AC/DC surge protection Optional AFCI arc-fault protection Build and Installation The GEN3 combines a compact, installer-friendly design with comprehensive communication and monitoring capabilities. IP66-rated enclosure Smart cooling system Integrated LCD display RS485, Wi-Fi and CAN communication Noise level: less than 50dB Operating temperature: -25°C to +60°C Maximum operating altitude: 4,000m Relative humidity: 0-100% Dimensions: 416 x 538.5 x 229.5mmWeight: 22.5kgWarranty: 5 or 10 years UK Compliance The Fogstar-LuxpowerTek GEN3-LB-EU range is designed to meet relevant UK and European electrical, safety and grid requirements, including G99 and G100. Why Choose the Fogstar-LuxpowerTek GEN3? The Fogstar-LuxpowerTek GEN3 combines a hybrid solar inverter, high-current battery management, backup capability and generator integration within one flexible energy-storage platform. With up to 12kW of PV input, dual MPPTs, 125A battery charging, 7ms backup switching and six inverter sizes from 3kW to 6kW, it is an excellent solution for residential solar and battery storage installations requiring performance, flexibility and future expansion.

Sunsynk ACURE 3.6Kw On & Off grid Hybrid solar & wind Inverter WiFi Included   #5/20/22: SUNSYNK SUNC1−3.6LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly Expandable System – Connect up to 10 wireless smart switches for tailored load control Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board Advanced Connectivity – Built-in Bluetooth, Wi-Fi,  & LAN (Ethernet)  Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Fogstar-LuxpowerTek 6Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter  - WiFi dongle included #12: INV-LUX-GEN2-6KW-SPH-WH Luxpower 6kw Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products The Fogstar-LuxPowerTek GEN2-LB-EU 6K is a powerful 6kW single-phase hybrid solar inverter, designed for residential solar PV and battery storage systems. Built on proven LuxPowerTek technology, it offers excellent performance for on-grid, backup and off-grid applications and is configured for seamless integration with compatible Fogstar 48V / 51.2V lithium battery systems. Combining dual MPPT solar inputs, up to 6kW battery charge and discharge power, intelligent energy management and parallel capability, the GEN2-LB-EU 6K provides a flexible and scalable solution for modern home energy storage installations. Its robust IP66-rated enclosure, comprehensive protection features and wide operating temperature range make it suitable for demanding installations, while multiple communication options provide straightforward system monitoring and battery integration. Backed by an industry-leading 10-year warranty for long-term reliability and peace of mind. Key Features 6kW single-phase hybrid inverter Compatible with 48V / 51.2V low-voltage battery systems Optimised for compatible Fogstar battery storage Dual MPPT solar inputs for flexible PV array design Up to 6,000W battery charge/discharge power Up to 140A maximum battery discharge current Up to 125A maximum battery charge current Suitable for on-grid and off-grid operation Parallel capability for scalable installations PV force wake-up supported IP66-rated enclosure Integrated LCD display with RGB status indicators RS485, Wi-Fi and CAN communication Integrated DC isolator Low operating noise of <40dB 10-year warranty Battery & Power Performance The GEN2-LB-EU 6K is designed around a 48V nominal low-voltage battery architecture, making it an excellent choice for high-capacity residential battery storage systems. Nominal battery voltage: 48V Battery operating range: 40–60V Maximum discharge current: 140A Maximum charge current: 125A Maximum charge/discharge power: 6,000W PV force wake-up: Supported The high battery current capability allows the inverter to deliver strong charge and discharge performance, helping households maximise solar self-consumption, make use of off-peak electricity tariffs and provide stored energy when required. Solar PV & Hybrid Operation With two independent MPPT trackers, the LuxPowerTek GEN2-LB-EU 6K provides greater flexibility when designing solar arrays across different roof orientations or operating conditions. As a true hybrid inverter, it intelligently manages energy between the solar PV array, battery storage system, household loads and electricity grid, helping maximise the amount of renewable energy used within the property. Build & Installation Designed with installers in mind, the GEN2-LB-EU 6K combines a compact form factor with durable construction and straightforward connectivity. Protection rating: IP66 Cooling: Smart cooling system Topology: Transformerless Display: LCD with RGB indicators Communications: RS485, Wi-Fi and CAN Noise emission: <40dB Maximum operating altitude: 2,000m Dimensions: 440 × 528 × 220mm Weight: 25kg Operating temperature: -25°C to +60°C Relative humidity: 0–100% Efficiency High conversion efficiency helps maximise the usable energy generated and stored by the system. Maximum inverter efficiency: 97.3% Maximum charge/discharge efficiency: 94.5% Integrated Safety & Protection The LuxPowerTek GEN2-LB-EU 6K incorporates comprehensive electrical and system protection, including: PV reverse-polarity protection Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Ground-fault monitoring Grid monitoring Integrated DC switch Type III AC/DC surge protection UK Grid Compliance & Certification The GEN2-LB-EU 6K is designed to meet relevant UK and international grid, electrical safety and inverter standards, including: G98, G99, EN 62109, EN 61000, IEC 62116, IEC 61727, IEC 61683 and CEI 0-21, together with applicable related standards. Why Choose the LuxPowerTek GEN2-LB-EU 6K? For homeowners and installers looking for a 6kW hybrid inverter with 48V battery compatibility, the GEN2-LB-EU 6K offers an attractive combination of high battery power, flexible solar integration and robust protection. Its compatibility with Fogstar battery systems makes it particularly well suited to high-capacity, cost-effective home energy storage, while parallel capability provides additional flexibility for systems that may need to expand in the future. Ideal for: residential solar PV, home battery storage, time-of-use tariff charging, increased solar self-consumption, backup power and suitable off-grid applications.

Sunsynk ACURE 5Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC1−5.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly Expandable System – Connect up to 10 wireless smart switches for tailored load control Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board Advanced Connectivity – Built-in Bluetooth, Wi-Fi,  & LAN (Ethernet)  Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

EcoFlow PowerOcean:  1ph Inverter Smart Home Energy    #3: 6861 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-98 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Take control of your energy future with the EcoFlow PowerOcean 3.68kW Hybrid Inverter—a powerful and intelligent solar inverter designed for modern UK households. Combining high-efficiency solar energy conversion, advanced lithium iron phosphate (LFP) battery compatibility, and industry-leading safety features, PowerOcean is your foundation for power independence. Whether you’re powering a compact flat or a large residential property, EcoFlow PowerOcean offers unmatched scalability, reliability, and control through the EcoFlow App and Web Portal. Enjoy seamless energy monitoring, battery management, and solar optimisation—all from your smartphone. Key Features Scalable Battery Storage: Expandable up to 15kWh with over 6,000 charge cycles for long-term reliability. Smart Monitoring: View real-time power usage, solar input, and battery status via the EcoFlow App and Web Portal. Advanced Safety Features: Built with LFP battery tech, a fire prevention module, and IP65-certified weatherproof housing. 15-Year Warranty: Confidence backed by a long-term manufacturer guarantee. Plug-and-Play Expansion: Future-proof design ensures easy upgrades with additional battery modules. Technical Specifications DC Attributes Max PV Power: 3.68kW Max Voltage: 600V Max Isc (Short Circuit Current): 20A Max Current (per MPPT): 18A (1x PV input) 16A (2x PV input) No. of MPPTs: 2 MPPT Voltage Range: 90–520V AC Attributes Max AC Output Power: 3.68kW Max Current: 18.4A Number of Phases: 1 System Information Max Efficiency: 96.5% IP Rating: IP65 (Dust-tight & weatherproof for outdoor use) Weight: 20.6kg Dimensions: 679.6 × 182.7 × 280mm What's In the Box? 1 x EcoFlow PowerOcean 3.68kW single phase hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 3.68kW Inverter? If you’re a homeowner in the UK looking to reduce reliance on the grid, store more of your solar energy, gain reliable backup, and invest in a system that can grow with you, the EcoFlow PowerOcean 3.68 kW Single Phase Hybrid Inverter is a strong choice. Its combination of smart tech, safety features and scalability make it more than just a basic inverter—it’s a long‑term energy platform.

Fox 7kW K Series Single Phase Hybrid Inverter 2: FE-KH1-7.0 Storage Systems - Hybrid Inverter #3 5986 Fox K Series 7kW Datasheet Fox K Series 7kW Manual Fox K Series 7kW Warranty Fox K Series7kW G100 Certification FoxESS KH7 7kW Single-Phase Hybrid Inverter The FoxESS KH7 is a sleek 7kW single-phase full hybrid inverter built with IP65 protection and high-voltage battery compatibility. Designed for maximum efficiency, it delivers a 97.4% round-trip efficiency, ensuring you get the best performance from your solar installation. Its triple MPPT design allows for optimal solar production even with panels on multiple roof orientations, while its expandable battery capacity makes it a flexible and future-proof solution. Key Features IP65 Rated – dust and water resistant, perfect for outdoor installation Remote Monitoring – manage and track system performance anywhere Expandable Storage – compatible with all Cube & EP batteries Triple MPPT Design – ensures maximum energy harvest from multiple arrays High Round-Trip Efficiency – up to 97% system efficiency Plug & Play Installation – supplied with CT clamps and meter for convenience Included in the Box CT Clamps Meter Technical Specifications Weight: 29 kg Rated Power: 7,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 minutes): 10,500 W Max AC Power (5 minutes): 7,000 W Surge AC Power (1 second): 7,700 W Max DC Current: 48 A Max DC Inputs: 3 DC Fuses: None Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 3 Integrated DC Switch: Yes Warranty: 5 years Why Choose the FoxESS KH7? The FoxESS KH7 inverter combines high efficiency, expandability, and smart monitoring in a compact design. It’s the ideal choice for homeowners and small businesses seeking to maximize solar production and ensure long-term reliability with flexible battery storage options. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox 8kW K Series Single Phase Hybrid Inverter #2: FE-KH1-8.0 Storage Systems - Hybrid Inverter Fox K Series 8.0kW Datasheet Fox K Series 8.0kW Manual Fox K Series 8.0kW Warranty Fox K Series 8.0kW G100 Certificate The FoxESS KH8 is a powerful and sleek 8kW single-phase full hybrid inverter, designed to deliver maximum efficiency and flexibility for UK solar PV systems. With support for high-voltage battery storage, triple MPPT design, and advanced monitoring via the FoxESS Cloud, it ensures optimal solar production and intelligent energy management. Engineered for long-term performance and easy installation, the FoxESS KH8 is the ideal choice for homeowners seeking to reduce grid reliance and expand energy storage capacity over time. Key Features ✅ Easy to Install – compact and user-friendly design ✅ IP65 Rated – weatherproof for indoor or outdoor use ✅ FoxESS Cloud Remote Monitoring – track and manage energy performance anywhere ✅ Scalable Battery Options – compatible with all FoxESS Cube & EP batteries ✅ Triple MPPT – maximises yield from different roof orientations ✅ High Round-Trip Efficiency – up to 97% for optimal energy use ✅ CT Clamps and Meter Included – everything you need in the box Technical Specifications General Weight: 29 kg Rated Power: 8,000 W Euro Efficiency: 97.4% Warranty: 5 years Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Connections Max DC Inputs: 3 Connector: MC4 (6 included) Has Integrated DC Switch: Yes DC Fuses: No Transformer: None MPPT Quantity: 3 Why Choose the FoxESS KH8 Hybrid Inverter? Designed with UK solar PV systems in mind Provides scalable storage options for future energy needs Offers reliable outdoor performance with IP65 protection Delivers high-efficiency solar conversion with triple MPPT Backed by 5-year manufacturer’s warranty for peace of mind ✅ The FoxESS KH8 is the perfect 8kW hybrid inverter for maximising solar energy, integrating flexible battery storage, and building a future-ready energy system. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox 9kW K Series Single Phase Hybrid Inverter #2: FE-KH1-9.0 Storage Systems - Hybrid Inverter Fox 9.0kW K Series Data Sheet Fox 9.0kW K Series User Manual Fox 9.0kW K Series Warranty Fox 9.0kW K Series G100 Certification FoxESS KH9 9kW Single Phase Hybrid Inverter – Full IP65 Protection Harness maximum efficiency and flexibility with the FoxESS KH9 9kW single-phase hybrid inverter, designed for high-voltage battery systems to optimise solar power usage. Ideal for residential installations, this inverter provides advanced features, remote monitoring, and high-performance reliability. Key Features High round-trip efficiency – up to 97% for maximum energy savings IP65 rated – suitable for outdoor installation 4 MPPT's – ensures optimal solar production from multiple array orientations Expandable battery capacity – compatible with Cube & EP batteries Remote monitoring and control – via FoxESS Cloud web portal or smartphone app CT clamps and meter included – for easy setup and monitoring Warranty Registration Standard warranty: 5 years Extended 10-year warranty – register your installation directly with Fox online Click here for warranty registration and review the warranty documentation for full details Technical Specifications Rated Power: 9,000 W Max AC Power (5 minutes): 9,000 W Surge AC Power (1 second): 9,900 W Min PPT Voltage: 80 V | Max PPT Voltage: 500 V DC Startup Voltage: 75 V | DC Shutdown Voltage: 601 V Max DC Power: 13,500 W | Max DC Current: 64 A Max DC Inputs: 4 | MPPT Quantity: 4 Connector: MC4 | Included Connectors: 6 Transformer: None Euro Efficiency: 97.4% Has Integrated DC Switch: Yes The FoxESS KH9 inverter combines performance, safety, and smart monitoring, making it a perfect choice for homeowners seeking reliable, efficient, and flexible solar energy storage.

Fox 10kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.0 Storage Systems - Hybrid Inverter#3: 5989 Fox 10.0kW Datasheet Fox 10.0kW Manual Fox 10.0kW Warranty Fox 10.0kW G100 Certificate FoxESS KH10 – 10kW Single-Phase Hybrid Inverter The FoxESS KH10 is a high-performance, single-phase hybrid inverter designed to optimise solar energy usage in residential and small commercial installations. With IP65 rating, high-voltage battery compatibility, and 4 MPPT technology, this inverter maximises round-trip efficiency and ensures optimal energy production from your solar system. With remote monitoring via FoxESS Cloud and included CT clamp for zero-export control, the KH10 offers convenience, flexibility, and efficiency in one compact design. Key Features ✅ 10kW single-phase hybrid inverter – ideal for high-capacity solar systems ✅ High-voltage battery compatibility – works with Cube & EP batteries ✅ IP65 rated – suitable for outdoor installations ✅ Remote monitoring and control – via smartphone or web portal ✅ 4 MPPT's – ensures maximum solar production ✅ High round-trip efficiency – 97% for optimal energy usage ✅ Expandable battery capacity – add batteries as your energy needs grow ✅ CT clamp included – for zero-export functionality Technical Specifications General Weight: 29 kg Rated Power: 10,000 W Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 4 Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Connections Connector Type: MC4 Included Connectors: 8 DC Fuses: 0 Integrated DC Switch: Yes Why Choose the FoxESS KH10 Hybrid Inverter? Efficient energy conversion – get the most from your solar panels Scalable energy storage – compatible with multiple battery types User-friendly monitoring – control and track performance remotely Robust outdoor design – IP65 rating ensures durability Zero-export ready – included CT clamp for grid compliance ✅ The FoxESS KH10 10kW Hybrid Inverter is a high-efficiency, scalable solution that combines reliability, advanced monitoring, and maximum energy utilisation for residential and small commercial solar installations.

Fox 10.5kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.5 Storage Systems - Hybrid Inverter Fox 10.5kW Datasheet Fox 10.5kW Manual Fox 10.5kW Warranty Fox 10.5kW G100 Certificate   FoxESS K Series 10kW Single Phase Hybrid Inverter Harness the full potential of your solar energy system with the FoxESS K Series 10kW single-phase hybrid inverter. Designed for efficiency and flexibility, this IP65-rated inverter is ideal for indoor or outdoor installations and works seamlessly with high-voltage batteries for maximum round-trip efficiency. Key Features Stylish and Robust Design: IP65-rated enclosure suitable for outdoor environments. High Efficiency: High-voltage battery compatibility ensures up to 97.4% round-trip efficiency. Remote Monitoring & Control: Access and control your system easily via FoxESS Cloud. Easy Installation: Lightweight design at 29kg, saving time and effort on-site. Battery Compatibility: Works with Cube & EP batteries. Zero Export Control: CT clamp included for safe and compliant energy management. Technical Specifications Specification Value Weight 29 kg Rated Power 10,500 W Minimum PPT Voltage 80 V Maximum PPT Voltage 500 V DC Startup Voltage 75 V DC Shutdown Voltage 601 V Maximum Input Voltage 600 V Maximum DC Power 15,000 W Maximum AC Power (5 min) 10,000 W Surge AC Power (1 sec) 10,500 W Maximum DC Current 64 A Max DC Inputs 4 DC Fuses 0 Connector MC4 Included Connectors 8 Euro Efficiency 97.4 % Transformer None MPPT Quantity 4 Integrated DC Switch Yes Why Choose the FoxESS K Series? The FoxESS K Series combines sleek design, reliable performance, and advanced technology to give you complete control over your solar energy. Its high-efficiency performance and flexible battery compatibility make it an excellent choice for homeowners looking to optimise their solar storage and energy management. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Solis Single Phase Low Voltage 8kW Energy Storage Hybrid Inverter   #2: SOL-S6-EH1P8K-L-PLUS Solis 8kW Data Sheet Solis 8kW User Manual Solis 8kW Warranty Solis Product Compatibility Solis 8kW Single Phase Low Voltage Energy Storage Hybrid Inverter   Overview The Solis 8kW Single Phase Low Voltage Energy Storage Hybrid Inverter PLUS is designed for high-demand residential and commercial solar applications. With advanced energy management features, it delivers reliable backup power, peak shaving, and flexible connection options for lead-acid or lithium batteries. Ideal for modern grid-tied or off-grid systems, this inverter maximises self-consumption and protects your investment. Key Features Built-in Backup Port with automatic UPS switching AI Optimised cloud-based, automated energy management assistant Supports up to 190A max charge/discharge current 200% DC oversizing capability for flexible solar array configuration Customisable charge/discharge times with 6 programmable settings 10-second 200% surge power backup for critical loads Generator compatibility with automatic On/Off control Flexible 1-phase or 3-phase parallel connection, supporting up to 48kW AC coupling to upgrade existing grid-connected systems Peak shaving control in both self-use and generator mode Compatible with lead-acid and lithium batteries with multiple protection features Technical Specifications Supplier Part No: S6-EH1P8K-L-PLUS Weight: 22.2 kg Rated Power: 8,000 W Max DC Power: 16,000 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,001 W Max DC Current: 64 A DC Inputs: 8, with MC4 connectors included Min PPT Voltage: 90 V | Max PPT Voltage: 435 V DC Startup/Shutdown Voltage: 90 V Max Input Voltage: 500 V MPPT Quantity: 8 Transformer: None Euro Efficiency: 96.5% Warranty: 5 years  

Fogstar-LuxpowerTek 8Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - WiFi dongle included #12: F/B93.10018AA Luxpower 8-10kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products LuxPower GEN-LB-EU 8K Hybrid Inverter High-power hybrid performance with generator integration and full system flexibility The LuxPower GEN-LB-EU 8K is a premium single-phase hybrid inverter engineered for high-demand residential and light commercial installations. Combining strong solar generation, powerful battery management, and intelligent energy control, this inverter delivers a complete all-in-one energy solution. With dual MPPTs, up to 12kW PV input, and 167A battery charge/discharge capability, it’s built to maximise system performance while supporting on-grid, off-grid, and backup applications. Key Features 8kW rated AC output power Dual MPPT trackers (2 independent inputs) Up to 12kW maximum PV input 167A maximum battery charge/discharge current Dedicated generator port with automatic control Time-of-use and weather-based optimisation Parallel capability (up to 10 units) On-grid & off-grid operation Build & Installation Designed for durability and ease of installation in a wide range of environments: IP66-rated enclosure for indoor & outdoor use Smart cooling system for stable performance Transformerless design for higher efficiency Touchscreen colour display for easy control RS485, Wi-Fi & CAN communication interfaces Noise level: ≤50dB Max operating altitude: 2000m Physical Specifications: Dimensions: 536 × 566 × 290mm Weight: 42.64kg Operating temperature: -25°C to 60°C Humidity range: 0–100% Warranty: 10 years Battery & Power Performance Optimised for high-performance 48V battery systems, delivering fast charge/discharge capability: Nominal battery voltage: 48V Operating voltage range: 40–60V Max charge/discharge current: 167A Max charge/discharge power: 8,000W Force wake-up function from PV Ideal for rapid charging during peak solar generation or off-peak tariff periods. Efficiency & Protection Advanced protection systems ensure safe, stable, and compliant operation: Max efficiency: 97.5% EU efficiency: 94.3% Charge/discharge efficiency: 94.0% Integrated DC switch Type III AC/DC surge protection Anti-islanding protection Overcurrent & overvoltage protection AC short-circuit protection Leakage current protection Ground fault monitoring Grid monitoring Certifications:G99, G100, EN/IEC 62109-1/2, IEC 61683, EN 61000, EN 62920, IEC 62116, IEC 61727 AC Output & Grid Performance Built to integrate seamlessly with standard UK single-phase systems: Rated AC voltage: 230V Frequency: 50 / 60Hz Rated AC output current: 34.8A Max AC input power: 15,000W Continuous AC passthrough: 60A Adjustable power factor: 0.8 leading to 0.8 lagging Total harmonic distortion (THDi): <3% Solar (PV) Input Performance Designed for flexible system design and large solar arrays: Max PV input power: 12,000W 2 MPPTs (2 strings per MPPT configuration) MPPT voltage range: 120–550V Max PV input voltage: 600V Start-up voltage: 140V Max PV input current per MPPT: 25A Max short-circuit current per MPPT: 34A MPPT efficiency: 99.9% Perfect for multi-orientation roofs, improving overall yield and system efficiency. Why Choose the GEN-LB-EU 8K? Complete all-in-one hybrid energy solution Strong battery charging performance (167A) Supports generator integration for full backup systems Scalable for larger residential or commercial installs Fully compliant with UK grid regulations (G99/G100) Ideal for self-consumption, backup, and off-grid setups

Fogstar-LuxpowerTek 10Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - White - WiFi dongle included #12: F/B93.10011AA Luxpower Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products LuxPower GEN-LB-EU 10K Hybrid Inverter High-power hybrid inverter with generator integration and full system flexibility The Fogstar-LuxPower GEN-LB-EU 10K is a premium single-phase hybrid inverter designed for high-demand residential and light commercial installations. Combining solar PV, battery storage, grid supply, and generator backup in one unit, it delivers a powerful and flexible energy management solution. With dual MPPT inputs, up to 15kW PV capacity, and an industry-leading 208A battery charge/discharge capability, this inverter is built to maximise solar generation, optimise energy usage, and ensure reliable backup power. Key Features 10kW rated AC output Dual MPPT trackers for flexible system design Up to 15kW maximum PV input 208A maximum battery charge/discharge current Dedicated generator port with automatic control Time-of-use & weather-based optimisation Parallel capability (up to 10 units) On-grid & off-grid functionality Build & Installation Engineered for durability and easy installation in a wide range of environments: IP66-rated enclosure (indoor & outdoor use) Smart cooling system for stable operation Transformerless topology for higher efficiency Integrated touchscreen colour display RS485, Wi-Fi & CAN communication Noise level: ≤50dB Max operating altitude: 2000m Physical Specifications: Dimensions: 536 × 566 × 290mm Weight: 42.64kg Operating temperature: -25°C to 60°C Humidity: 0–100% Warranty: 10 years Battery & Power Performance Optimised for high-performance 48V battery systems, delivering rapid charge and discharge capability: Nominal battery voltage: 48V Operating voltage range: 40–60V Max charge/discharge current: 208A Max charge/discharge power: 10,000W Force wake-up from PV supported Ideal for fast charging during peak solar production or low-cost off-peak tariffs. Efficiency & Protection Advanced safety and protection features ensure reliable long-term operation: Max efficiency: 97.5% EU efficiency: 94.3% Charge/discharge efficiency: 94.0% Integrated DC isolator Type III AC/DC surge protection Anti-islanding protection Overcurrent & overvoltage protection AC short-circuit protection Leakage current protection Ground fault monitoring Grid monitoring Certifications:G99, G100, EN/IEC 62109-1/2, IEC 61683, EN 61000, EN 62920, IEC 62116, IEC 61727 AC Output & Grid Performance Built to integrate seamlessly with standard UK single-phase systems: Rated AC voltage: 230V Frequency: 50 / 60Hz Rated AC output power: 10,000W Rated AC output current: 34.8A Max AC input power: 15,000W Continuous AC passthrough: 60A Adjustable power factor: 0.8 leading to 0.8 lagging Total harmonic distortion (THDi): <3% Delivers clean, stable power for both residential and light commercial loads. Solar (PV) Input Performance Designed for large solar arrays and flexible string configurations: Max PV input power: 15,000W 2 independent MPPTs (2:2 configuration) MPPT voltage range: 120–550V Max PV input voltage: 600V Start-up voltage: 140V Max PV input current per MPPT: 25A Max PV short-circuit current per MPPT: 34A MPPT efficiency: 99.9% Ideal for multi-orientation roofs, maximising energy yield throughout the day. Why Choose the GEN-LB-EU 10K? Powerful 10kW hybrid inverter for demanding installations Industry-leading 208A battery performance Full generator integration for backup systems Scalable design for larger systems Fully compliant with UK grid standards (G99/G100) Suitable for on-grid, backup, and off-grid applications The LuxPower GEN-LB-EU 10K delivers maximum performance, flexibility, and energy independence—making it an ideal choice for modern solar and battery storage systems.

LuxpowerTek GEN PRO 7-12Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - WiFi dongle included Smart hybrid inverter set to the size required for G99. Once set upon installation this can't be changed #12: INV-LUX-GEN-PRO-8-12KW-SPH-BLK Luxpower 7-12kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products Fogstar-LuxpowerTek GEN PRO-LB-EU Hybrid Inverter – 7kW, 8kW, 10kW & 12kW   Certifications & UK Compliance The GEN PRO-LB-EU range is designed to meet relevant European and UK grid and safety requirements, including: EN 62109-1/-2, EN 61000, EN 50549-1/-10, G99 and G100. High-power single-phase hybrid inverter with triple MPPT solar input, high-current battery charging, generator integration and flexible system expansion. The Fogstar x LuxpowerTek GEN PRO-LB-EU is a powerful single-phase 230V hybrid inverter range designed for high-demand residential and light commercial solar and battery storage installations. Available in 7kW, 8kW, 10kW and 12kW models, the GEN PRO combines three independent MPPTs, up to 21kW of solar PV input and up to 270A battery charge and discharge current, providing exceptional performance for larger solar and battery systems. Designed for both on-grid and off-grid applications, it offers high battery throughput, intelligent energy management, generator integration and rapid 7ms backup switching. For larger installations, up to 16 inverters can be connected in parallel, while the robust IP66-rated enclosure makes the GEN PRO suitable for a wide range of installation environments. Available with warranty coverage of up to 10 years for long-term confidence and peace of mind. Key Features 7kW, 8kW, 10kW and 12kW output options Single-phase 230V hybrid inverter 3 independent MPPTs Up to 21kW maximum PV input 48V low-voltage battery compatibility Up to 270A battery charge and discharge current Up to 12kW battery charge/discharge power Generator input up to 18.4kW Fast 7ms backup switching Double-rated surge power for up to 1 second Supports up to 16 units in parallel On-grid and off-grid operation 100A continuous AC passthrough IP66-rated enclosure Integrated DC switch Built-in Type II AC & DC surge protection Wi-Fi, RS485 and CAN communication Warranty options of 5 or 10 years Battery & Power Performance Designed around high-current 48V battery storage, the GEN PRO is particularly suited to installations requiring fast battery charging and substantial discharge capability. Nominal battery voltage: 48V Battery operating range: 48–60V Maximum charge/discharge current: 180–270A, model dependent Maximum charge/discharge power: 8–12kW, model dependent Battery force wake-up via PV, grid or generator Its high-current battery capability enables rapid charging from surplus solar generation, generators or off-peak grid electricity. Solar PV Input The GEN PRO provides three independent MPPTs, giving installers greater flexibility when designing larger or more complex solar arrays. 8kW: up to 16,000W maximum PV input 10kW: up to 21,000W maximum PV input 12kW: up to 21,000W maximum PV input Rated PV input voltage: 360V Maximum PV input voltage: 530V MPPT operating range: 60–425V Start-up voltage: 50V MPPT configuration: 1 / 1 / 1 Maximum PV input current: 20A per MPPT Maximum PV short-circuit current: 32A per MPPT MPPT efficiency: 99.9% The three independent MPPT inputs allow separate PV strings to operate independently, making the inverter particularly useful for properties with multiple roof orientations, different pitches or more complex solar array layouts. Grid & AC Operation Rated AC voltage: 230V Rated frequency: 50/60Hz Rated AC output: 8,000W / 10,000W / 12,000W Rated AC output current: 34.7A / 43.5A / 52A Maximum AC input power: 23,000W Maximum AC input current: 100A Maximum continuous AC passthrough: 100A Generator input power: up to 18,400W Rated generator input current: 80A Adjustable power factor: 0.8 leading to 0.8 lagging Total harmonic current distortion: <3% Backup switching time: 7ms Generator Integration The GEN PRO includes dedicated generator support, making it suitable for properties requiring an additional source of backup power or installations with limited grid availability. With up to 18.4kW generator input and an 80A rated generator input current, the inverter can intelligently integrate solar, battery, grid and generator power within a single energy-management system. Efficiency & Protection Maximum inverter efficiency: 97.3% EU efficiency: 96.0% MPPT efficiency: 99.9% Maximum charge/discharge efficiency: 95.0% Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Ground-fault monitoring Grid monitoring Integrated DC switch Type II AC/DC surge protection Optional AFCI arc-fault protection Build & Installation The GEN PRO combines high power capability with a robust enclosure suitable for demanding installations. IP66-rated Smart cooling system Transformerless AC-side topology Transformer-based battery-side topology Integrated LCD display RS485, Wi-Fi and CAN communications Noise level: <50dB Operating temperature: -25°C to +60°C Derating above: 45°C Maximum operating altitude: 4,000m Derating above: 2,000m Storage temperature: -40°C to +65°C Relative humidity: 0–100% Dimensions: 420 × 634 × 229.5mmWeight:  30.2kgWarranty: 5 / 10 years Why Choose the Fogstar-LuxpowerTek GEN PRO? The Fogstar-LuxpowerTek GEN PRO-LB-EU provides a powerful solution for larger home energy-storage systems and demanding installations where conventional hybrid inverters may not provide sufficient solar input, battery throughput or backup capability. With up to 12kW single-phase output, 21kW PV input, 270A battery charging, triple MPPTs, 100A AC passthrough and generator integration, it provides an exceptionally flexible platform for high-performance solar and battery storage systems.

Solis Single Phase Low Voltage 10kW Energy Storage Hybrid Inverter  #2: SOL-S6-EH1P10K-L-PLUS-UK Solis Plus Hybrid Data Sheet Solis Plus hybrid User Manual Solis Plus Hybrid Warranty Solis Product Compatibility ENA Reference: SOLIS/18144/V1/A2 Solis 10kW Single-Phase Low-Voltage Energy Storage Inverter   PLUS Model – Built for Demanding Power Scenarios The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring fast UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Compatibility & Installation Notes DC battery cable not included For metering: SOL-METER-1PH-CT1 is not compatible with the 8/10K PLUS SOL-METER-1PH-EASTRON is required Technical Specifications Supplier Part Number: S6-EH1P-10K-L-PLUS Rated Power: 8,000 W Maximum DC Power: 16,000 W Maximum AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,001 W MPPT Quantity: 8 Maximum DC Current: 64 A Maximum DC Inputs: 8 Minimum MPPT Voltage: 90 V Maximum MPPT Voltage: 435 V Maximum Input Voltage: 500 V DC Startup / Shutdown Voltage: 90 V Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 3 Euro Efficiency: 96.5% Transformer: None Weight: 23.8 kg Warranty: 5 years Ideal For High-load residential systems Hybrid solar + battery installations Generator-assisted backup systems Retrofit AC-coupled battery upgrades Sites requiring fast backup switching and surge support

Fogstar-LuxPowerTek GEN2-LB-EU 14K: 14kW Single Phase Hybrid Inverter   - WiFi dongle included Smart hybrid inverter set to the size required for G99. Once set upon installation this can't be changed #12: INV-LUX-14KW-SPH-BLK Luxpower 14kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products   Certified to applicable standards including PTPIREE Type A, EN 62109-1, EN 61000, G99 and G100. The Fogstar-LuxPowerTek GEN2-LB-EU 14K is a powerful 14kW single-phase hybrid inverter designed for larger residential and light-commercial solar PV and battery storage systems. Operating at 230V and designed for integration with compatible Fogstar Energy 48V (51.2V) batteries, the GEN2-LB-EU 14K combines solar PV, battery storage, grid connection, generator support and high-power backup within one robust IP66-rated inverter. With 14kW grid-connected output, 12kW UPS backup, up to 18kW of PV input and 250A battery charge/discharge capability, it provides considerably more power than a conventional residential hybrid inverter. Three independent MPPTs provide excellent flexibility for solar arrays across multiple roof orientations, while parallel operation of up to 10 units allows the system to be expanded for larger installations. Key Features 14kW rated grid-connected AC output 12kW UPS / backup output Up to 18kW solar PV input 3 independent MPPTs 48V low-voltage battery system Compatible with suitable Fogstar Energy 48V / 51.2V batteries Up to 250A battery charge and discharge current Up to 12kW battery charge/discharge power 18kW generator input Generator, smart-load and AC-coupling functionality Automatic generator control, exercise and boost AI-driven energy optimisation mode <7ms UPS switching time 2× rated UPS surge power for 0.5 seconds Supports up to 10 inverters in parallel IP66-rated enclosure Integrated Type III AC/DC surge protection Wi-Fi, RS485 and CAN communication Colour touchscreen 10-year warranty Solar PV Input The GEN2-LB-EU 14K supports up to 18kW of solar PV input, making it ideal for larger solar installations where maximising on-site generation is a priority. Three independent MPPT trackers provide greater design flexibility for solar arrays installed across different roof orientations. Specification GEN2-LB-EU 14K Maximum PV Input 18,000W Rated PV Voltage 340V MPPTs 3 independent MPPTs MPPT Configuration 1:1:1 MPPT Voltage Range 120–440V Maximum PV Voltage 550V Start-Up Voltage 100V Maximum PV Input Current 26A / 15A / 15A Maximum PV Short-Circuit Current 31A / 18A / 18A MPPT Efficiency 99.9% 48V Battery Storage Designed around a 48V low-voltage battery architecture, the GEN2-LB-EU 14K can be paired with compatible lithium-ion and lead-acid battery systems, including suitable Fogstar Energy 51.2V batteries. Its high 250A charge and discharge capability makes it particularly suitable for properties with substantial energy storage and peak-power requirements. Battery Specification Rating Rated Battery Voltage 48V Battery Voltage Range 40–60V Battery Types Lithium-ion / Lead-acid Maximum Charge Current 250A Maximum Discharge Current 250A Maximum Charge Power 12,000W Maximum Discharge Power 12,000W Battery Wake-Up PV / Grid / Generator Grid & AC Performance The GEN2-LB-EU 14K delivers an impressive 14kW rated grid-connected output from a single-phase 230V inverter. AC Specification Rating Rated AC Output 14,000W Rated AC Voltage 230V Rated AC Output Current 61A Rated Frequency 50 / 60Hz AC Input Voltage Range 180–270V Maximum AC Input Power 22,500W Maximum AC Input Current 100A Maximum Continuous AC Passthrough 100A Power Factor 0.99 Adjustable Power Factor 0.8 leading – 0.8 lagging Total Harmonic Current Distortion <5% 12kW UPS & Backup Power For installations where backup power is important, the LuxPowerTek GEN2 14K provides a substantial 12kW UPS / backup output. In single-inverter operation, switching to backup power takes less than 7ms, helping maintain power to connected loads during a grid outage. Backup Specification Rating Rated UPS Output 12,000W Rated UPS Current 52A Output Voltage 230V Output Frequency 50 / 60Hz Surge Capability 2× rated output for 0.5 seconds Single-Inverter Switching <7ms Parallel Switching <20ms Output Pure sine wave Total Harmonic Voltage Distortion <3% Generator Integration The GEN2-LB-EU 14K offers comprehensive generator integration for properties requiring additional backup or off-grid capability. 18,000W maximum generator input 80A rated generator input current Automatic generator control Generator exercise functionality Generator boost functionality Battery charging from generator Multifunction port for generator, smart-load or AC-coupling operation Parallel Operation Need even more power? The LuxPowerTek GEN2-LB-EU platform supports up to 10 compatible inverters operating in parallel, allowing system capacity to be expanded for larger residential, commercial and off-grid installations. Efficiency & Protection 99.9% MPPT efficiency 95.1% maximum inverter efficiency 94.2% EU efficiency 95.0% maximum battery charge/discharge efficiency Overcurrent protection Overvoltage protection AC short-circuit protection Grid monitoring Integrated DC switch Type III AC surge protection Type III DC surge protection   Built for UK Solar & Battery Installations The Fogstar x LuxPowerTek GEN2-LB-EU 14K offers an unusually high level of power for a single-phase hybrid inverter. Its combination of 14kW AC output, 18kW PV input, 12kW battery charge/discharge power and 12kW UPS backup makes it particularly well suited to larger homes and light-commercial properties requiring more capacity than a conventional 3.6kW, 5kW or 6kW hybrid inverter. G99 and G100 compatibility also makes the inverter suitable for appropriately designed UK grid-connected installations, subject to DNO approval and the requirements of the individual installation. Build & Installation IP66-rated enclosure Smart cooling system Transformerless AC-side topology Transformer-based battery-side topology Colour touchscreen RS485, Wi-Fi and CAN communication Noise level: <55dB Operating temperature: -25°C to 60°C Storage temperature: -25°C to 60°C Maximum operating altitude: 4000m Relative humidity: 0–100% 10-year warranty Dimensions: 566mm (L) × 275mm (W) × 653mm (H)Weight: 48kg Why Choose the Fogstar x LuxPowerTek GEN2 14K? The Fogstar x LuxPowerTek GEN2-LB-EU 14K provides a high-power alternative to conventional residential hybrid inverters. With 14kW single-phase output, three MPPTs, 18kW PV capacity, powerful 48V battery charging, 12kW UPS backup and generator integration, it provides an impressive all-in-one solution for larger solar PV and battery storage installations. For customers looking for a powerful Fogstar-compatible 48V hybrid inverter with substantial solar, battery and backup capability, the GEN2-LB-EU 14K is an excellent choice.

Fogstar-LuxpowerTek 20Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - White  - WiFi dongle included #12: F/B93.10011AA Luxpower 20kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products LuxPower TriP2-LB-3P 20kW Three-Phase Hybrid Inverter The Fogstar-LuxPower TriP2-LB-3P 20K is a powerful 20kW three-phase hybrid inverter designed for larger residential, commercial and light industrial energy storage installations. Combining high-capacity solar input with 48V low-voltage battery compatibility, three independent MPPTs, three-phase unbalanced load support and a dedicated generator port, the TriP2 provides a highly flexible platform for demanding solar and battery storage applications. With up to 30kW PV input, independent export control across each phase and the ability to connect up to 10 inverters in parallel, the TriP2 is equally suited to high-consumption properties and scalable commercial energy storage systems. Backed by an industry-leading 10-year warranty for long-term confidence and peace of mind. Key Features 20kW three-phase hybrid inverter Up to 30kW maximum PV input 3 independent MPPTs / 3 PV strings 48V low-voltage battery compatibility Supports three-phase unbalanced loads Independent grid export control on each phase Dedicated multi-function GEN port Generator automatic start/stop functionality AC coupling support Smart load management 8 configurable time-of-use charge/discharge periods Up to 10 units can be connected in parallel IP66-rated enclosure Integrated colour touchscreen Wi-Fi, RS485 and CAN communications 10-year warranty Solar PV Performance The TriP2-LB-3P 20K provides substantial PV capacity for larger solar installations. Maximum PV input power: 30kW Number of MPPTs: 3 PV strings: 3 Maximum AC output/export power: 20kW Maximum efficiency: 97.7% The three independent MPPTs provide greater flexibility when designing arrays across different roof orientations or areas with differing solar conditions. Battery Performance The TriP2 uses a 48V low-voltage battery architecture, providing compatibility with suitable high-capacity low-voltage lithium battery systems. Battery operating voltage: 40–60V Maximum battery charge/discharge current: 250A Maximum battery power: up to 12kW, dependent on battery voltage and configuration Maximum charge/discharge efficiency: 94.0% Intelligent lithium battery charging BMS self-adaptation The inverter can deliver up to 20kW AC output through the combined contribution of PV and battery power, subject to system operating conditions and configuration. Generator & Smart Port A dedicated GEN port provides additional flexibility for backup and hybrid energy systems. Supported functionality includes: Automatic generator start and stop Generator charging integration Smart load management AC coupling functionality Flexible backup system design Generator Input: 3L / N / PE 230 / 400Vac 50 / 60Hz Maximum input current: 70A Three-Phase Energy Management The TriP2 is specifically designed for three-phase installations and supports unbalanced loads across individual phases. Independent phase export control allows the inverter to manage grid export on each phase separately, providing greater control in properties where consumption varies significantly between phases. Time-of-Use Energy Management Up to 8 configurable time-of-use periods allow charging and discharging behaviour to be tailored around electricity tariffs and site requirements. This makes the system particularly well suited to applications using off-peak electricity tariffs, solar self-consumption strategies and peak-demand management. Protection & Safety Comprehensive integrated protection includes: PV reverse-polarity protection Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Grid monitoring Integrated DC switch Type III DC surge protection Type III AC surge protection Build & Installation Protection rating: IP66 Smart cooling system Transformerless topology Colour touchscreen interface Communications: RS485 / Wi-Fi / CAN Maximum operating altitude: 2,000m Noise level: 50dB Operating temperature: -25°C to +60°C Power derating above: 45°C Relative humidity: 0–100% Dimensions: 480 × 703 × 258mm Weight: 53kg Warranty: 10 years Standards & Compliance The TriP2-LB-3P 20K is certified to a range of applicable UK and international standards, including G99 and G100, alongside EN 62109, EN 61000, IEC 61683, EN 50549-10, IEC 62116 and IEC 61727. Ideal for: large residential properties, commercial premises, farms, workshops and light industrial sites requiring a powerful three-phase hybrid inverter with high PV capacity, low-voltage battery storage and generator integration.