Home EV Chargers

Myenergi Current Transformer with 5m cable (100A 16mm) #1: MYEN-CT100-16-05 EV Charging - Monitoring and Control#3: 2623#4: CT100-16-05 or MY-500116 C MyEnergi Current Transformer (CT) & 5m Cable Assembly This current transformer (CT) with 5m cable is designed for use with MyEnergi Harvi, Eddi, and Zappi devices. It enables accurate monitoring of household energy consumption and renewable generation, helping you optimise self-consumption and energy efficiency. ⚡ Product Features Compatible with MyEnergi Harvi, Eddi & Zappi 5m pre-terminated cable for flexible installation Provides real-time monitoring of household loads Enhances system performance and energy management 🔧 Additional Information An extra CT clamp is required if you wish to monitor real-time PV or wind generation with your Eddi or Zappi. Easy to install with a simple plug-and-play setup.

EVSE test box for zappi RCD testing #1: MYEN-EVSE-TSET-BOX #3: 2948 EVSE Test Box Datasheet EVSE Test Box – Zappi & AC Chargepoint Testing The EVSE Test Box is designed for testing Zappi EV chargers and other AC chargepoints when used alongside a multifunction electrical tester (not supplied). Key Features Compatible with Type 1 and Type 2 connections Suitable for single-phase and three-phase Zappi chargers Perform RCD tests using the test box in conjunction with your multifunction electrical tester Note: A multifunction electrical tester is required to carry out full testing.

Tesla Gen 3 Wall Connector - 7kW/22kW Type 2 Tethered #2: S-WALLCONNECTOR-G3 EV Charging - EV Charger Tesla Datasheet Tesla Manual   Installer accreditation is required from Tesla to purchase this item. Tesla Gen 3 Wall Connector   Wall Connector is our most convenient charging solution for Tesla and non-Tesla electric vehicles. The lightweight design allows for versatile, indoor or outdoor mounting that adapts to a range of electrical systems - designed for houses, apartments, hospitality properties and workplaces. Compatible with any Type 2 charge port Schedule, manage and track charging from the Tesla app Wi-Fi connectivity for over-the-air firmware updates Up to 71 km of range per hour Up to 22 kW with three-phase charging grids Power sharing to support multiple Wall Connectors Installation with single or three-phase grids Tesla charge port opening from connector 7.3 m cable length Warranty Residentail personal use - 48 months Commercial use - 12 months  

EcoFlow Power Pulse 2 7kW EV Charger Untethered #3: 6880 Ecoflow EV Charger Data Sheet Ecoflow EV Charger Warranty  Ecoflow EV Charger Declaration of Conformity Ecoflow EV Charger Manual EcoFlow Pulse cable available here when in stock Designed for both single-phase and three-phase residential electrical systems, this smart energy management device enables seamless integration with your home's power infrastructure. Whether used as a standalone solution or as part of a complete renewable energy system, it intelligently manages power flow to improve efficiency, reduce energy costs and maximise self-consumption. For optimal performance, pairing the unit with the ADL400 Smart Meter is recommended, allowing accurate load balancing and real-time energy monitoring. The system also integrates effortlessly with solar PV inverters and home battery storage systems, helping you make the most of your renewable energy while reducing reliance on the grid. Key Features Compatible with single-phase and three-phase home electrical systems Operates as a standalone device or with the ADL400 Smart Meter Intelligent load balancing for improved system performance Seamless integration with solar PV systems and home battery storage Maximises self-consumption of renewable energy Helps reduce electricity bills and grid dependency Supports smarter, more sustainable home energy management Smart Energy Control Installation is simple, requiring only a connection to your home's main consumer unit or smart distribution board. Once connected, the device communicates with compatible external equipment to intelligently regulate power sources and automatically adjust charging current according to real-time household demand. By continuously optimising energy flow between the grid, solar panels, battery storage and connected loads, the system delivers safe, efficient and cost-effective energy management with minimal user intervention. For details on supported communication protocols and compatible devices, please refer to the product documentation.

myenergi GLO EV Charger 7kW Tethered #2: MYEN-ZAPPI-3AS07T-G  EV Charging - EV Charger   myenergi GLO Data Sheet myenergi GLO Installation Manual   Myenergi GLO 7kW Tethered EV Charger – Smart Home EV Charging Solution Effortless App-Controlled Charging The Myenergi GLO EV Charger offers a screenless, modern design with all controls managed through the myenergi app. Enjoy remote access, energy monitoring, and configuration from your smartphone, ensuring efficient, hassle-free charging for your electric vehicle. Quick Installation & Smart Setup The charger includes the Installer Assistant app, guiding you through a step-by-step commissioning process in minutes. The compact and sleek design makes the GLO ideal for both residential and commercial settings. Secure Tap-to-Charge Access Built-in RFID technology provides secure access to your EV charger. Replace traditional PIN codes with RFID cards or fobs, supporting up to 126 users for multiple EV access points. Solar & Battery Integration The GLO EV Charger seamlessly integrates with solar panels and home battery storage systems, optimising green energy use while charging your vehicle. Key Features Rated Power: 7kW, 32A max, 230V AC Energy Tariff Integration for cost-efficient charging Flexible cable compatibility: up to 6mm² (flexible), 10mm² (solid) Robust design: Operating temperature -25°C to +40°C Compact, contoured, and aesthetically pleasing Specifications Weight: 4.1 kg Dimensions: 350 x 170 x 160 mm Supports up to 2 x 35mm cables Tap-to-Charge Access Key (RFID) included Upgrade your home or workplace with the Myenergi GLO 7kW EV Charger – smart, secure, and future-ready.

Duracell Energy Dura Charger 7kW Black AC EV Charger  #5: Duracell EV (1P-T) 7kW-T Duracell EV Datasheet   Introducing the advanced DuraCharger, an electric vehicle (EV) charger that optimizes your home energy system. With four charging modes, you can harness energy from your solar panels or take advantage of lower grid tariffs. The DuraCharger also tracks the energy typically sent back to the grid and redirects it to charge your EV. Designed for seamless integration with the Duracell Energy inverter and battery, it helps you maximize energy efficiency and minimize waste. Key Features: Cutting-edge AC electric vehicle charger Compatible with home solar installations Optimized for variable grid tariffsIncludes a 4m tethered Type-2 charging cable Remote control via the Duracell Energy app Single-phase operationIngress protection rating: IP55 Power output: 7.4kW Dimensions: 250mm (W) x 341mm (H) x 85mm (D) Weight: 3.2kg Three-year warranty

Tesla Gen 3 Wall Connector with Matt:e Pen Fault Protection #2: TES-WALLCONNECTOR-G3-PACK EV Charging - EV Charging Package   Tesla Datasheet Tesla Manual   Tesla Gen 3 Wall Connector – Smart EV Charging for Home and Business The Tesla Gen 3 Wall Connector is a versatile and convenient EV charging solution for both Tesla and non-Tesla electric vehicles. Its lightweight and compact design allows for indoor or outdoor mounting, making it ideal for houses, apartments, workplaces, and hospitality properties. Key Features Compatible with any Type 2 charge port for maximum flexibility Wi-Fi connectivity for over-the-air firmware updates Schedule, manage, and track charging via the Tesla app Up to 71 km of range per hour for fast, efficient charging Supports up to 22 kW with three-phase electrical systems Power sharing to support multiple Wall Connectors on one circuit Compatible with single or three-phase grids Tesla charge port opening directly from the connector 7.3 m cable length for flexible installation Included Components Single Phase Monitoring and Protection Device with Terminals Warranty Residential / personal use: 48 months Commercial use: 12 months Why Choose the Tesla Gen 3 Wall Connector? The Tesla Gen 3 Wall Connector provides fast, reliable, and smart charging for your electric vehicle, whether at home or on commercial premises. With its smart features, Wi-Fi updates, and flexible installation options, it ensures a convenient, safe, and future-proof charging experience for all Type 2 EVs. Order now from ITS Technologies – the UK’s trusted supplier for Tesla and EV charging solutions.

Sigenergy EV AC Charger 22 kW – Type 2, 4G, 5 m Cable (White) #2:  SIG-EVAC-22-4G-TYPE2-WH   Sigenergy Brochure Sigenergy EV AC Charger Datasheet Sigenergy EV AC Charger Module mySigen Installation  Sigenergy EV AC Charger Warranty   Smart 22kW Type 2 EV charger with 4G, load management, app control and IP65 rating The Sigenergy EV AC Charger 22 kW is a smart, high-performance charging solution designed to integrate seamlessly with modern home energy systems. Built for speed, safety and intelligent energy use, it enables efficient EV charging while maximising the use of renewable energy. As part of Sigenergy’s advanced home ecosystem, this charger complements the SigenStor all-in-one energy storage system, delivering a future-ready solution for sustainable mobility. Smart EV Charging with Renewable Energy Designed to work alongside solar and energy storage systems, the charger supports green power charging, allowing electric vehicles to be charged using self-generated solar energy where available. Intelligent scheduling and energy optimisation help reduce reliance on the grid and lower running costs. Key smart charging benefits include: Solar-optimised EV charging with Sigenergy home energy systems Intelligent scheduling and monitoring via the mySigen App Real-time data tracking for energy usage and charging sessions Intelligent Load Management & Safety The charger features dynamic load management, automatically adjusting charging power to prevent electrical overload and ensure safe operation within the property’s limits. Integrated electrical protection reduces installation complexity while maintaining high safety standards. Safety and control features include: Dynamic load management to prevent overload Integrated residual current failure protection User-friendly charging experience with automatic power adjustment Flexible Installation & Robust Design Engineered for flexibility, the charger supports wall or pole mounting and offers top or bottom cable entry for easier installation. Its durable IP65-rated enclosure ensures reliable operation in both indoor and outdoor environments. Installation highlights: Quick and simple installation with reduced wiring steps Wall- or pole-mounted installation options IP65-rated housing for outdoor durability Connected, Future-Ready Charging With built-in 4G connectivity, the charger remains connected without relying solely on local Wi-Fi, ensuring reliable communication, remote monitoring and future updates via the Sigenergy platform. Ideal Applications Residential EV charging with solar integration Smart homes using Sigenergy SigenStor systems Properties requiring fast, three-phase AC charging Users seeking app-based monitoring and control

Zappi  ev charger 7kw tethered white #2: MYEN-ZAPPI-2H07UW-G EV Charging - EV Charger   Zappi  Data Sheet Zappi G quick installation manual Zappi G Installation Manual Zappi 7kW Single Phase Untethered EV Charger – White Charge your electric vehicle smarter with the Zappi 7kW Single Phase Untethered EV Charger in White. Designed by myenergi, the Zappi is one of the UK's most advanced smart EV chargers, enabling you to charge your EV using surplus energy generated by your solar PV or wind turbine system, helping to reduce electricity bills while maximising your renewable energy usage. Its untethered design provides a clean, modern appearance and allows you to use your own Type 2 charging cable, making it suitable for a wide range of electric and plug-in hybrid vehicles. Key Features 7kW single-phase untethered EV charger Universal Type 2 socket for maximum vehicle compatibility Modern White finish Charge your EV using surplus solar PV or wind-generated electricity Three intelligent charging modes: Fast – Maximum charging speed using grid and renewable energy ECO – Optimises charging by combining renewable generation with grid power ECO+ – Prioritises surplus renewable energy to minimise electricity costs Maximises self-consumption of renewable energy Compatible with solar PV, wind turbine and battery storage systems Dynamic load balancing to protect your home's electrical supply Economy tariff input for off-peak charging Smart charge scheduling and event logging PIN code security lock Integrated RCD protection and earth fault detection – no earth rod required Automatic firmware checking and updates Front lid tamper detection for enhanced security Fully compliant with UK Smart Charge Point Regulations Approved for the former OLEV home and workplace charging schemes 3-year manufacturer warranty Intelligent EV Charging The Zappi continuously monitors your home's electricity generation and consumption, automatically adjusting charging power to make the most of excess renewable energy. Whether you're charging from solar, wind or the grid, the Zappi helps reduce charging costs while increasing your home's energy independence. Its untethered design offers a neat installation, allowing you to connect any compatible Type 2 charging cable when required. Technical Specifications Specification Details Product Zappi EV Charger Power Output 7kW Supply Single Phase Connector Type Untethered Type 2 Socket Colour White Charging Modes Fast, ECO, ECO+ Smart Charging Yes Solar PV Compatible Yes Wind Turbine Compatible Yes Battery Storage Compatible Yes Dynamic Load Balancing Yes Built-in RCD Protection Yes Earth Rod Required No Warranty 3 Years The Zappi 7kW Single Phase Untethered EV Charger – White is the ideal solution for homeowners looking to combine intelligent EV charging with renewable energy. With advanced smart charging features, seamless solar integration and industry-leading safety technology, it delivers efficient, reliable and future-ready charging for every journey.

Zappi  ev charger 7kw tethered black #2: MYEN-ZAPPI-2H07TB-G  Charging - EV Charger   Zappi  Data Sheet Zappi G quick installation manual Zappi G Installation Manual Zappi 7kW Single Phase Untethered EV Charger – Black Charge your electric vehicle smarter with the Zappi 7kW Single Phase Untethered EV Charger in White. Designed by myenergi, the Zappi is one of the UK's most advanced smart EV chargers, enabling you to charge your EV using surplus energy generated by your solar PV or wind turbine system, helping to reduce electricity bills while maximising your renewable energy usage. Its untethered design provides a clean, modern appearance and allows you to use your own Type 2 charging cable, making it suitable for a wide range of electric and plug-in hybrid vehicles. Key Features 7kW single-phase untethered EV charger Universal Type 2 socket for maximum vehicle compatibility Modern White finish Charge your EV using surplus solar PV or wind-generated electricity Three intelligent charging modes: Fast – Maximum charging speed using grid and renewable energy ECO – Optimises charging by combining renewable generation with grid power ECO+ – Prioritises surplus renewable energy to minimise electricity costs Maximises self-consumption of renewable energy Compatible with solar PV, wind turbine and battery storage systems Dynamic load balancing to protect your home's electrical supply Economy tariff input for off-peak charging Smart charge scheduling and event logging PIN code security lock Integrated RCD protection and earth fault detection – no earth rod required Automatic firmware checking and updates Front lid tamper detection for enhanced security Fully compliant with UK Smart Charge Point Regulations Approved for the former OLEV home and workplace charging schemes 3-year manufacturer warranty Intelligent EV Charging The Zappi continuously monitors your home's electricity generation and consumption, automatically adjusting charging power to make the most of excess renewable energy. Whether you're charging from solar, wind or the grid, the Zappi helps reduce charging costs while increasing your home's energy independence. Its untethered design offers a neat installation, allowing you to connect any compatible Type 2 charging cable when required. Technical Specifications Specification Details Product Zappi EV Charger Power Output 7kW Supply Single Phase Connector Type Untethered Type 2 Socket Colour Black Charging Modes Fast, ECO, ECO+ Smart Charging Yes Solar PV Compatible Yes Wind Turbine Compatible Yes Battery Storage Compatible Yes Dynamic Load Balancing Yes Built-in RCD Protection Yes Earth Rod Required No Warranty 3 Years The Zappi 7kW Single Phase Untethered EV Charger – White is the ideal solution for homeowners looking to combine intelligent EV charging with renewable energy. With advanced smart charging features, seamless solar integration and industry-leading safety technology, it delivers efficient, reliable and future-ready charging for every journey.

Myenergi Zappi EV Charger 22kW Untethered White #2:  EV Charging - EV Charger   Zappi 22kW Product Compatibility Zappi   Zappi 22kW User Manual Zappi 22kW Installation Manual Zappi 22kW Untethered EV Charger – White Power your electric vehicle with clean, renewable energy using the Zappi 22kW Untethered EV Charger in Black. Designed by myenergi, the Zappi is one of the UK's leading smart EV chargers, allowing you to maximise self-generated electricity from your solar PV or wind turbine system while reducing reliance on the grid. Whether you want the fastest possible charging or to prioritise surplus renewable energy, the Zappi gives you complete control through its intelligent charging modes and advanced energy management features. Key Features 22kW three-phase untethered EV charger Black finish with universal untethered socket Charge your EV using surplus solar PV or wind-generated electricity Three intelligent charging modes: Fast – Maximum charging speed using grid and renewable power ECO – Blends renewable energy with grid power for efficient charging ECO+ – Prioritises surplus renewable energy to minimise electricity costs Optimises self-consumption of your renewable energy Fully compatible with solar PV, battery storage systems and wind turbines Dynamic load balancing to protect your property's electrical supply Economy tariff input for off-peak charging Smart charge scheduling and event logging PIN code security lock Integrated RCD protection and earth fault detection – no earth rod required Automatic firmware updates and checking Front lid tamper detection for enhanced security Compliant with UK Smart Charge Point Regulations Approved for the former OLEV home and workplace charging schemes 3-year manufacturer warranty Smarter EV Charging The Zappi intelligently monitors your home's energy usage and available renewable generation, automatically adjusting charging power to maximise the use of free solar or wind energy. This helps reduce charging costs while increasing your home's energy independence. Ideal for homes with solar panels, battery storage or renewable energy systems, the Zappi also works as a high-performance standalone EV charger when renewable generation isn't available. Technical Specifications Specification Details Product Zappi EV Charger Power Output 22kW Phase Three Phase Type Untethered Colour White Charging Modes Fast, ECO, ECO+ Smart Charging Yes Solar PV Compatible Yes Wind Turbine Compatible Yes Battery Storage Compatible Yes Dynamic Load Balancing Yes Built-in RCD Protection Yes Earth Rod Required No Warranty 3 Years The Zappi 22kW Untethered EV Charger is the ideal choice for homeowners looking to charge their electric vehicle faster, reduce electricity costs, and make the most of their renewable energy system. Combining intelligent energy management with industry-leading safety features, it delivers efficient, reliable, and future-ready EV charging.

Zappi EV Charger 22kW Untethered Black #2:  EV Charging - EV Charger   Zappi 722kW Product Compatibility Zappi  Zappi 22kW User Manual Zappi 22kW Installation Manual Zappi 22kW Untethered EV Charger – Black Power your electric vehicle with clean, renewable energy using the Zappi 22kW Untethered EV Charger in Black. Designed by myenergi, the Zappi is one of the UK's leading smart EV chargers, allowing you to maximise self-generated electricity from your solar PV or wind turbine system while reducing reliance on the grid. Whether you want the fastest possible charging or to prioritise surplus renewable energy, the Zappi gives you complete control through its intelligent charging modes and advanced energy management features. Key Features 22kW three-phase untethered EV charger Black finish with universal untethered socket Charge your EV using surplus solar PV or wind-generated electricity Three intelligent charging modes: Fast – Maximum charging speed using grid and renewable power ECO – Blends renewable energy with grid power for efficient charging ECO+ – Prioritises surplus renewable energy to minimise electricity costs Optimises self-consumption of your renewable energy Fully compatible with solar PV, battery storage systems and wind turbines Dynamic load balancing to protect your property's electrical supply Economy tariff input for off-peak charging Smart charge scheduling and event logging PIN code security lock Integrated RCD protection and earth fault detection – no earth rod required Automatic firmware updates and checking Front lid tamper detection for enhanced security Compliant with UK Smart Charge Point Regulations Approved for the former OLEV home and workplace charging schemes 3-year manufacturer warranty Smarter EV Charging The Zappi intelligently monitors your home's energy usage and available renewable generation, automatically adjusting charging power to maximise the use of free solar or wind energy. This helps reduce charging costs while increasing your home's energy independence. Ideal for homes with solar panels, battery storage or renewable energy systems, the Zappi also works as a high-performance standalone EV charger when renewable generation isn't available. Technical Specifications Specification Details Product Zappi EV Charger Power Output 22kW Phase Three Phase Type Untethered Colour Black Charging Modes Fast, ECO, ECO+ Smart Charging Yes Solar PV Compatible Yes Wind Turbine Compatible Yes Battery Storage Compatible Yes Dynamic Load Balancing Yes Built-in RCD Protection Yes Earth Rod Required No Warranty 3 Years The Zappi 22kW Untethered EV Charger is the ideal choice for homeowners looking to charge their electric vehicle faster, reduce electricity costs, and make the most of their renewable energy system. Combining intelligent energy management with industry-leading safety features, it delivers efficient, reliable, and future-ready EV charging.

Zappi  ev charger 22kw tethered black #2: MYEN-ZAPPI-2H22TB-G EV Charging - EV Charger   Zappi  Data Sheet Zappi G quick installation manual Zappi G Installation Manual Zappi 22kW Tethered EV Charger – Black Charge your electric vehicle faster while making the most of your renewable energy with the Zappi 22kW Tethered EV Charger in Black. Manufactured by myenergi, the Zappi is one of the UK's most advanced smart EV chargers, allowing you to intelligently charge using surplus electricity generated by your solar PV or wind turbine system, helping to reduce energy costs and maximise self-consumption. The integrated charging cable provides added convenience, making everyday charging quick and hassle-free. Key Features 22kW three-phase tethered EV charger Integrated charging cable for convenient plug-and-charge operation Premium Black finish Charge your EV using surplus solar PV or wind-generated energy Three intelligent charging modes: Fast – Delivers maximum charging speed using grid and renewable power ECO – Optimises charging by combining renewable generation with grid electricity ECO+ – Prioritises surplus renewable energy to minimise grid consumption Maximises self-consumption of your renewable energy Compatible with solar PV, wind turbine and battery storage systems Dynamic load balancing to protect your home's electrical supply Economy tariff input for off-peak charging Smart charge scheduling and event logging PIN code security lock Built-in RCD protection and earth fault detection – no earth rod required Automatic firmware checking and updates Front lid tamper detection for enhanced security Fully compliant with UK Smart Charge Point Regulations Approved for the former OLEV home and workplace charging schemes 3-year manufacturer warranty Intelligent Renewable Energy Charging The Zappi continuously monitors your home's energy generation and electricity demand, automatically adjusting charging power to maximise the use of excess renewable energy. Whether you're charging from solar, wind or the grid, the Zappi helps lower running costs while increasing your energy independence. Its tethered design keeps the charging cable permanently connected, making it the ideal solution for drivers who want quick, convenient charging every day. Technical Specifications Specification Details Product Zappi EV Charger Power Output 22kW Phase Three Phase Type Tethered Colour Black Charging Modes Fast, ECO, ECO+ Smart Charging Yes Solar PV Compatible Yes Wind Turbine Compatible Yes Battery Storage Compatible Yes Dynamic Load Balancing Yes Built-in RCD Protection Yes Earth Rod Required No Warranty 3 Years The Zappi 22kW Tethered EV Charger combines fast three-phase charging, intelligent energy management and seamless renewable energy integration, making it the perfect choice for homes looking to maximise solar generation, reduce charging costs and enjoy reliable, future-ready EV charging.

SolarEdge Smart EV Charger - 7.4kW, 1ph, 6m Cable Type 2, (for UK) #4: SE-EVK74C00-01 SolarEdge EV Charger 7.4kW Data Sheet SolarEdge EV Charger 7.4kW Installation Manual SolarEdge EV Charger 7.4kW Registering EV Charger SolarEdge Smart EV Charger – Optimise Your Home Energy Charge your electric vehicle efficiently using excess solar power with the SolarEdge Smart EV Charger. Seamlessly integrated with the SolarEdge Home range, this tethered single-phase charger allows homeowners to monitor and control both PV and EV energy from the mySolarEdge app. Key Features Smart Solar Integration Uses excess solar energy to charge your EV, reducing reliance on the grid. Dynamic balancing of charging power output for efficient energy use. Remote Monitoring & Control Monitor PV, EV, and grid consumption from a single app. Customise charging schedules to take advantage of off-peak rates and Time-of-Use (TOU) tariffs. Manual TOU scheduling for one-off charging events. Safe & Compliant G100 Issue 2 Amendment 2 compliant. Tamper protection and main circuit breaker protection. Mode 3 charging combines PV and grid electricity safely. Convenient Design Tethered 6m Type 2 cable included. Install up to three chargers per residential site. Supports vertical wall installation with local network communication (Ethernet, LSA+, Wi-Fi). Warranty 3-year manufacturer warranty for peace of mind. Installation Requirements Must include an Earth Electrode. Residential systems only. Must be installed with an inverter and meter. Communicates with cloud and inverter via local network router. Technical Specifications Phases: Single Phase EV Power Rating: 7.4 kW Dimensions: 260 x 764 x 385 mm (H x W x D) Why Choose the SolarEdge Smart EV Charger? The SolarEdge Smart EV Charger maximises solar energy usage while providing flexible, safe, and efficient charging for your electric vehicle. Integrated monitoring, smart scheduling, and TOU optimisation ensure you get the most from your home solar system while saving on electricity costs.

SolarEdge Smart EV Charger - 22kW 3p, Socket Type 2, RFID, MID, (for UK) Un-Tethered #4: SE-EVK22URM-01 SolarEdge EV Charger 22kW Data Sheet SolarEdge EV Charger 22kW Installation Manual SolarEdge EV Charger 22kW Registering EV Charger SolarEdge Smart EV Charger – Intelligent Home Charging The SolarEdge Smart EV Charger integrates seamlessly with the SolarEdge Home range, allowing homeowners to control and optimise all household energy through the mySolarEdge app. Efficiently use excess PV energy to charge your electric vehicle while taking advantage of smart scheduling and monitoring features. Key Features Optimised Solar Charging: Utilises excess solar PV energy to charge your EV. Custom Scheduling: Automatically charge during low-tariff periods, at night, or even during power outages. Flexible Installation: Suitable for three-phase indoor or outdoor setups. Smart Monitoring: Control and monitor charging remotely via the mySolarEdge app, including charging schedules and history. G-100 Compliant: Meets industry standards for safety and performance. Optional RFID Authentication: Enhanced security with optional card authentication and MID meter. Tamper Detection: Alerts you to any tampering attempts for added peace of mind. Warranty: 3-year manufacturer warranty. Specifications Nominal AC Output Voltage: 3 x 230 / 400 V Protection Rating: IP54 Compatible Inverters: All SetApp-enabled residential inverters up to SE15K (excluding Single Phase with Communication Interface) Connectivity: Ethernet 1 & 2, WLAN/Wi-Fi supported Cable Length (for cabled variants): 6m Dimensions (H x W x D): 260 x 580 x 390 mm Why Choose SolarEdge EV Charger? Designed for efficiency, flexibility, and smart home integration, the SolarEdge Smart EV Charger allows you to maximise self-consumption, save on electricity costs, and enjoy intelligent control of your EV charging from anywhere.

Sigenergy Sigenstor 12kW EV DC Charging Module, CCS2 UK #2:  SIG-STOR-EVDC-12-10S2  | EV Charging | EV Charger  #4: SIG-11080024 Sigenergy Brochure Sigenergy EV DC Charging Module Datasheet Sigenergy EV DC Charging Module Installation Manual  Sigenergy EV DC Charging Module Warranty  To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here Smart & Future-Ready EV DC Charger for Home Energy Systems The Sigenergy Sigenstor EV DC Charging Module 12kW with 10m CCS2 Cable (Part No: SIG-STOR-EVDC-12-10S2) is an advanced solution for home EV charging. Built as part of the innovative Sigenergy SigenStor 5-in-One modular energy system, this unit integrates seamlessly with your solar and storage setup. Designed with bi-directional V2X technology, you are not only able to charge your electric vehicle but can also use your EV as a backup power source for your home. Supporting 150V – 1000V charging, it ensures wide EV compatibility while delivering a stable 12kW fast DC charge. With the mySigen App integration, you can easily track, schedule, and optimise charging sessions to make the most of 100% solar-powered charging. Its IP66-rated enclosure guarantees durability and maintenance-free performance in UK weather conditions. Key Benefits 12kW bi-directional EV DC charging – fast, stable, and efficient 10m CCS2 cable – long reach for flexible charging V2X ready – use EV as home backup power (vehicle-to-grid/home) 150V – 1000V charging range – wide compatibility with electric vehicles 100% solar charging capability – maximise renewable energy use mySigen App control – track, schedule & manage charging remotely IP66 protection rating – weatherproof and maintenance-free Part of Sigenergy SigenStor system – seamless modular integration Technical Specifications General Information Product Name: Sigenergy Sigenstor EV DC Charging Module 12kW 10m CCS2 Part Number: SIG-STOR-EVDC-12-10S2 System Type: EV DC Charger (part of SigenStor 5-in-One modular system) Application: Home and residential EV charging Weight: 40kg Electrical & Performance Rated Power: 12,000 W (12kW) Charging Range: 150 V – 1000 V Bi-Directional Functionality: V2X ready (vehicle-to-home/grid support) Connectivity & Control Cable Length: 10m CCS2 connector Smart Control: mySigen App (track & schedule charging) Safety & Protection Protection Rating: IP66 – waterproof, dustproof, outdoor-ready Design: Maintenance-free, robust construction Why Choose the Sigenergy Sigenstor EV DC 12kW Charging Module? The Sigenergy 12kW EV DC Charging Module is a future-proof home EV charger designed for UK households looking to combine solar power, energy storage, and smart EV charging in one integrated system. With V2X technology, you can power your home from your EV during outages, while 100% solar compatibility ensures you maximise renewable energy use. Reliable, durable, and easy to manage via the mySigen App, it’s the perfect choice for eco-conscious homeowners seeking flexibility, safety, and long-term value.

Sigenergy Sigenstor 25kW EV DC Charging Module, CCS2 UK #2: SIG-STOR-EVDC-25-10S2   | EV Charging | EV Charger   Sigenergy Brochure Sigenergy EV DC Charging Module Datasheet Sigenergy EV DC Charging Module Installation Manual  Sigenergy EV DC Charging Module Warranty  To view our full Sigenergy collection page click here For a bespoke quote complete our quote form here High-Power EV DC Charger for Home Solar Energy Systems The Sigenergy Sigenstor EV DC Charging Module 25kW with 10m CCS2 Cable (Part No: SIG-STOR-EVDC-25-10S2) is an advanced solution for home EV charging, designed for homeowners who want fast, efficient, and intelligent charging. Part of the Sigenergy SigenStor 5-in-One modular energy system, it integrates solar inverter, EV DC charger, battery PCS, battery pack, and EMS into one seamless platform. With V2X-ready technology, this module allows bi-directional charging, letting your EV act as a power source for your home. Supporting a wide 150V – 1000V charging range, it is compatible with most modern electric vehicles and delivers a stable 25kW DC charge. The mySigen App enables tracking and scheduling of charging sessions, while 100% solar charging capability ensures you maximise renewable energy use. Its IP66-rated enclosure ensures it is weatherproof, dustproof, and maintenance-free, making it ideal for UK outdoor installations. Key Benefits 25kW bi-directional DC charging – high-power, stable, and efficient 10m CCS2 cable – long reach for flexible installation V2X ready technology – power your home from your EV (vehicle-to-home/grid) 150V – 1000V charging range – wide compatibility with modern EVs 100% solar charging – fully utilise renewable energy Smart control via mySigen App – schedule and track charging remotely IP66-rated weatherproof design – robust, outdoor-ready, and maintenance-free Integrated with SigenStor system – seamless modular integration Technical Specifications General Information Product Name: Sigenergy Sigenstor EV DC Charging Module 25kW 10m CCS2 Part Number: SIG-STOR-EVDC-25-10S2 System Type: EV DC Charger (part of SigenStor 5-in-One modular system) Application: Home and residential EV charging Electrical & Performance Rated Power: 25,000 W (25kW) Charging Range: 150 V – 1000 V Bi-Directional Functionality: V2X ready (vehicle-to-home/grid support) Connectivity & Control Cable Length: 10m CCS2 connector Smart Control: mySigen App for scheduling and tracking charging Safety & Protection Protection Rating: IP66 – dustproof, waterproof, outdoor-ready Design: Maintenance-free, durable, and robust Why Choose the Sigenergy Sigenstor 25kW EV DC Charging Module? The Sigenergy 25kW EV DC Charging Module is perfect for UK homeowners seeking high-power, future-proof, and solar-integrated EV charging. With V2X technology, app-based control, and 100% solar compatibility, it provides efficient, safe, and intelligent energy management. Its IP66 design ensures reliable operation in all weather conditions, making it a smart addition to any SigenStor energy system.