Solar Inverters

SolaX 5kW G4-V2 Hybrid Inverter with Wi-Fi #2: X1-HYBRID-G4-5.0-V2 SolaX 5.0kW Data Sheet SolaX 5.0kW Manual SolaX 5.0kW Warranty SolaX 3.7kW G99 Certificate For a full list of SolaX products click here. SolaX X1-Hybrid G4 Single Phase Hybrid Inverter & Charge Controller Overview The SolaX X1-Hybrid G4 is a fourth-generation single-phase hybrid inverter and AC charge controller, designed to deliver high-efficiency energy conversion and fast battery charging for residential PV systems. This model builds on the success of the previous generation while adding enhanced features for reliability, oversizing, and speed. Key Features Supports up to 150% PV oversizing for maximum energy production High reliability: HALT-tested, extreme temperature (-30°C to +60°C), salt spray tested, full load aging tested Fast installation: Quick setup in approximately 30 minutes Rapid charging: Can nearly fully charge a Triple Power battery in just one hour Element protection: Operates efficiently in extremely cold conditions down to -30°C Wi-Fi included: Remote monitoring and control without additional equipment Specifications Weight: 24 kg Rated Power: 5,000 W Min MPPT Voltage: 125 V Max MPPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Power: 7,500 W Max AC Power (5 Minutes): 5,001 W Surge AC Power (1 Second): 5,002 W Max DC Current: 28 A Max DC Inputs: 2 DC Fuses: None Connector Type: SUNCLIX Included Connectors: 2 Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years This inverter is ideal for residential PV systems seeking fast charging, reliable operation in harsh environments, and maximized solar self-consumption.

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2 SolaX 3.7kW Data Sheet SolaX 3.7kW Manual SolaX 3.7kW Warranty SolaX 3.7kW G98 Certificate For a full list of SolaX products click here. SolaX G4-V2 HV Single Phase Hybrid Inverter & Charge Controller The SolaX G4-V2 represents the fourth generation of single-phase hybrid inverters and AC charge controllers, combining high efficiency, fast charging, and robust performance. Ideal for residential solar systems, this inverter maximises solar energy utilisation while providing smart battery management and enhanced reliability in harsh environments. Key Features Supports up to 150% PV Oversizing: Maximise solar input for consistent energy production. Fast Charging Speeds: Charge the Triple Power battery in almost one hour. High Reliability: Tested under extreme temperatures, HALT tested, salt spray tested, and full-load aging tested. Quick Installation: Reduced installation time with pre-configured connections and SUNCLIX connectors. Element Protection: Operates efficiently in temperatures as low as -30°C. Wi-Fi Included: Built-in Wi-Fi for remote monitoring and system control – no additional purchase required. Battery & PV Management: Integrated charge controller optimises solar and battery usage for maximum efficiency. Specifications Rated Power: 3,680 W Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Current: 28 A DC Inputs: 2 Connector Type: SUNCLIX (2 included) MPPT Quantity: 2 Euro Efficiency: 97% Integrated DC Switch: No Weight: 24 kg Warranty: 10 years

SolaX X1-FIT G4 7.5W (AC Coupled Inverter) #3: 4578 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty Solax X1 FIT G99 Certification   SolaX X1-FIT G4 7.5kW (AC Coupled Inverter) The SolaX X1-FIT G4 7.5kW AC Coupled Inverter Charger is designed to upgrade existing solar PV systems with reliable battery storage functionality. Compatible with any single-phase inverter brand, it delivers up to 97% efficiency and is built for both indoor and outdoor installations. With remote monitoring via the SolaX Cloud, homeowners can optimise energy usage and maximise savings. Benefits of the SolaX X1-FIT G4 Store excess solar energy for later use, reducing grid reliance Provides emergency power supply (EPS) during power cuts Compact, lightweight design with IP65 weatherproof rating Supports grid trading applications with rapid response times Compatible with high-voltage batteries, reducing cabling costs Advanced Features High Performance & Efficiency Max. efficiency: 97% Max. 7.5kW power output with 40A current AC attributes: Single-phase, 7500W max power Smart Energy Management VPP (Virtual Power Plant) function for smart grid trading Remote firmware upgrades and control Flexible peak shaving to balance grid demand Charging from the grid supported Reliable & Low Maintenance Natural cooling system for quiet operation Robust IP65 rating for indoor/outdoor use WiFi or LAN connectivity options available separately Technical Specifications AC Attributes Max Power: 7500W Max Current: 40A Phases: 1 System Performance Max Efficiency: 97% IP Rating: IP65 Weight: 23kg Dimensions: 482 × 417 × 181mm For a full list of SolaX products click here.

SolaX X1-SMART-G2 8.0kW 1ph 3MPPT Inverter (incl. WiFi and DC) #3: 6684 SolaX X1-SMART-G2 8.0.kW Data Sheet SolaX X1 SMART-G2. 8.0kW User Manual Part 1 SolaX X1-SMART-G2 8.0kW User Manual Part 2 SolaX X1-SMART-G2 8.0kW Installation Manual Part I SolaX X1-SMART-G2 8.0kW Installation Manual Part 2 For a full list of SolaX products click here. SolaX Single-Phase 2nd Generation Inverter The SolaX single-phase inverter is designed for maximum energy harvesting with a wide MPPT voltage range. Its advanced DSP control technology ensures a high efficiency of up to 97.4%, making it an ideal choice for residential solar systems. Features High efficiency performance Low start-up voltage for early energy capture Compact and lightweight design Remote monitoring capabilities Compatible with WiFi V2.0 IP66 rated for robust outdoor installation 5-year warranty Specifications Weight: 19.5 kg Maximum Efficiency: 98.2% Maximum AC Current: 34.8 A Maximum AC Power: 8,000 W DC Startup Voltage: 50 V Max DC Power: 16,000 W Max Voc Voltage: 560 V Start-up Current: 50 A MPPT Voltage Range: 100 – 560 V Number of MPPTs: 3 Dimensions (H x W x D): 513 x 370 x 170 mm  

Solis 3.6kW Plus Single Phase S6 Low Voltage Hybrid Inverter #2: SOL-S6-EH1P3.6K-L-PLUS-5Y    Solis S6 Plus Inverter Data Sheet Solis S6 Hybrid Plus User Manual Solis Inverter 6kW Warranty   Solis S6-EH1P3.6K-L-PLUS 3.6kW Hybrid Inverter – Advanced Energy Storage & Backup Solution The Solis S6-EH1P3.6K-L-PLUS Hybrid Inverter is a powerful 3.6kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems. Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability. High Solar Utilisation & Future-Ready PV Compatibility 160% PV Oversizing Support The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day. Compatible with Next-Generation Solar Modules With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels. Reliable Backup & Off-Grid Capability Powerful Off-Grid Performance The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems. Seamless Grid Transition With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages. Flexible Battery Integration Wide Battery Compatibility Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions. Customisable Backup Settings Users can define battery backup levels to prioritise essential loads and extend available backup time. Intelligent Energy Management Smart Load Control Integrated smart load management ensures critical appliances receive priority power during backup operation. AI-Powered & VPP Ready Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services. System Expansion & Generator Support Parallel System Capability Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations. Generator Integration Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups. Built for Durability & Easy Operation Industrial-Grade LCD Display The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration. IP66 Environmental Protection With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments. Key Features 3,600W rated power output Up to 7,200W max DC input power 2 MPPTs for greater system design flexibility 4 DC inputs for multi-string solar arrays 435V maximum input voltage 64A maximum DC current 96.5% Euro efficiency Integrated DC switch for added safety Transformerless design for improved efficiency MC4 connectors for straightforward compatibility 5-year warranty Technical Specifications Input & MPPT Data MPPT Quantity: 2 Max DC Inputs: 4 Has DC Fuses: No Connector Type: MC4 General Weight: 23kg Transformer: None Has Integrated DC Switch: Yes Warranty: 5 Years

Fox H1 3.7kW Hybrid Inverter 1PH G2 #2: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter Fox H1 3.7kW Datasheet Fox H1 3.7kW Manual Fox H1 3.7kW Installer Guide Fox H1 3.7kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   3.68kW Fox Single Phase Hybrid/AC Inverter – Expandable Storage, Dual MPPT This 3.68kW hybrid/AC inverter is a compact, high-performance solution for residential solar energy systems. With dual MPPT tracking and an impressive 97% round-trip efficiency, it ensures maximum solar energy production and system reliability. Designed for scalability, it supports up to seven Cube batteries in series. Compatible with all Fox Cube and EP5/6/EP11/12 batteries, it’s the perfect choice for homes seeking reliable energy independence. Key Features 🔧 Easy Installation – compact and installer-friendly design ⚡ High Voltage & Dual MPPT – ensures optimal solar yield 💧 IP65 Protection – suitable for indoor or outdoor installation 📡 Remote Monitoring – manage your system anytime, anywhere 🔄 Scalable Storage – expand with up to 7 batteries (33.24kWh max.) 🌍 Compatible with Fox Cube & EP Series batteries 🎯 High Efficiency – 97% round-trip efficiency What’s Included ✅ CT Clamps ✅ WiFi Stick     Additional Requirements 📏 A second CT if another generator set (PV, wind, etc.) is present ⚡ A meter between inverter and incoming power connection point if distance >30m Technical Specifications Rated Power: 3,680 W Weight: 22 kg Min. PPT Voltage: 80 V Max. PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 600 V Max. Input Voltage: 600 V Max. DC Power (5 mins): 5,500 W Max. AC Power (5 mins): 3,680 W Surge AC Power (1 sec): 4,400 W Max. DC Current: 32 A Max. DC Inputs: 2 DC Fuses: No Connector Type: MC4 Included Connectors: 4 Euro Efficiency: 95.7% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers ✅ With its high-voltage design, dual MPPT efficiency, and scalability up to 33.24kWh storage, this hybrid/AC inverter is ideal for households looking to maximise solar self-consumption and future-proof their energy systems. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #2: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter Take control of your energy with the SunSynk 3.6kW AC ECCO Hybrid Inverter, a next-generation super hybrid system designed for efficiency, flexibility, and smart energy management. Compatible with Lithium-ion and Lead Acid batteries, this inverter integrates seamlessly with Octopus Agile, Flux, and Go for real-time energy optimisation. Key Features High Efficiency Hybrid Inverter: Rated AC output of 3.68kW with a 7kW MPPT, ideal for generating energy even during winter months Dual MPPT Design: Maximises energy harvest from solar arrays Battery Compatibility: Supports up to 50kWh of connected Lithium-ion or Lead Acid batteries Advanced Grid Integration: Fully programmable power export with automatic switching between Grid-Tied and Off-Grid mode Scalable System: Up to 16 units can be paralleled with the same firmware for larger installations IP65 Rated & Anti-Islanding Protection: Ensures durability and safety in all conditions Euro Efficiency: 99.9% for maximum energy utilisation Technical Specifications Rated Power: 3,600 W Min MPPT Voltage: 125 V | Max MPPT Voltage: 500 V DC Startup Voltage: 150 V | DC Shutdown Voltage: 125 V Max Input Voltage: 500 V | Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W | Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A | Max DC Inputs: 2 Connector: MC4 | Integrated DC Switch: Yes MPPT Quantity: 2 | Transformer: None Warranty: 5 years Sunsynk App & Data Logger Remote Control: Change all inverter settings from anywhere in the world Real-Time Monitoring: Monitor energy production, consumption, and battery status instantly Push Notifications: Receive alerts for power cuts, generator use, or battery activity Live Stats & Reporting: Access detailed energy statistics, generate custom reports, and track savings Octopus Agile & Flux Integration: Charge batteries at the cheapest rates and discharge when electricity prices are high, optimising savings Start using the Sunsynk Logger app via the Apple App Store or Google Play Store. Why Choose the SunSynk 3.6kW ECCO Hybrid Inverter? Optimises energy production for both self-consumption and export Advanced safety features and programmable settings Supports smart grid integration for cost savings Scalable and flexible for residential or commercial installations

Fox 10kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-10.0 Inverters - Main Units Fox T Series 10.0kW Datasheet Fox T Series 10.0kW Install Guide Fox T Series 10.0kW Warranty Fox T Series 10.0kW G98 Certificate FoxESS T Series 3-Phase Inverter – 10.0kW Product Overview The FoxESS T Series inverter is a versatile solution for 3-phase residential homes and small commercial installations. Designed for high efficiency and reliability, it integrates seamlessly with solar PV and battery systems, offering a robust IP65-rated enclosure for indoor or outdoor use. Key Features Easy Installation – Plug-and-play design with flexible setup for rapid deployment. IP65 Protection – Dustproof and waterproof for long-lasting outdoor performance. Remote Monitoring – Track system performance via the FoxESS Cloud portal. High Efficiency – Round-trip efficiency of 98.6% ensures maximum energy utilisation. Specifications Weight: 17 kg Rated Power: 10,000 W DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Min/Max MPPT Voltage: 140 – 1,100 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 14 A Number of MPPTs: 2 DC Inputs: 2 DC Fuses: 2 Connector Type: MC4 (2 included) Transformer: None Integrated DC Switch: Yes Euro Efficiency: 97.8 % Warranty: 5 years This inverter is perfect for homeowners and small businesses looking for a reliable, efficient, and remotely monitored 3-phase solar solution. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox H1 5.0kW Hybrid Inverter G2 #3: 5984#2: FE-H1-5.0-G2 Storage Systems - Hybrid Inverter Fox H1 5.0kW Datasheet Fox H1 5.0kW Manual Fox H1 5.0kW Installer Guide Fox H1 5.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Single Phase Hybrid/AC Inverter – 5kW with Dual MPPT This single phase 5kW Hybrid/AC Inverter is designed for efficient solar energy storage and flexible system expansion. With dual MPPT technology and up to 97% round-trip efficiency, it ensures optimal solar production and seamless integration with compatible batteries. Perfect for home and small commercial installations, this inverter allows connection of up to seven batteries in series with a maximum storage capacity of 33.24kWh. Key Features ⚡ Easy Installation – streamlined setup process 🔋 High Voltage Compatibility – supports Cube & EP batteries 🌦️ IP65 Rated – suitable for indoor or outdoor installations 📡 Remote Monitoring – track performance anytime, anywhere 🌞 Dual MPPT Tracking – maximise solar energy harvest 🔄 High Efficiency – 97% round-trip efficiency for minimal energy loss What’s Included CT Clamps WiFi Stick Additional Requirements An extra CT clamp is required if connecting to another generator (PV, wind, etc.) A meter between the inverter and the incoming power connection point is required if distance exceeds 30m Technical Specifications Weight: 22 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 mins): 7,500 W Max AC Power (5 mins): 5,000 W Surge AC Power (1 sec): 5,500 W Max DC Current: 32 A Max DC Inputs: 2 DC Fuses: None Connectors: MC4 (x4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years 🔧 Ideal for system expansion – compatible with both new and existing solar setups.🌍 UK-compliant and built for long-term performance.   Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using HV2600 1M DC Extension Cable  

Solis 5kW Plus Single Phase S6 Low Voltage Hybrid Inverter #2: SOL-S6-EH1P5K-L-PLUS-5Y 5yr extended warranty available here Solis S6 Plus Inverter Data Sheet Solis S6 Hybrid Plus User Manual Solis Inverter 6kW Warranty   Solis S6-EH1P5K-L-PLUS 5kW Hybrid Inverter – Advanced Energy Storage & Backup Solution The Solis S6-EH1P5K-L-PLUS Hybrid Inverter is a powerful 5kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems. Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability. High Solar Utilisation & Future-Ready PV Compatibility 160% PV Oversizing Support The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day. Compatible with Next-Generation Solar Modules With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels. Reliable Backup & Off-Grid Capability Powerful Off-Grid Performance The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems. Seamless Grid Transition With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages. Flexible Battery Integration Wide Battery Compatibility Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions. Customisable Backup Settings Users can define battery backup levels to prioritise essential loads and extend available backup time. Intelligent Energy Management Smart Load Control Integrated smart load management ensures critical appliances receive priority power during backup operation. AI-Powered & VPP Ready Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services. System Expansion & Generator Support Parallel System Capability Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations. Generator Integration Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups. Built for Durability & Easy Operation Industrial-Grade LCD Display The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration. IP66 Environmental Protection With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments. Key Features 5,000W rated power output Up to 10,000W max DC input power 2 MPPTs for greater system design flexibility 4 DC inputs for multi-string solar arrays 500V maximum input voltage 64A maximum DC current 96.5% Euro efficiency Integrated DC switch for added safety Transformerless design for improved efficiency MC4 connectors for straightforward compatibility 5-year warranty Input & MPPT Data MPPT Quantity: 2 Max DC Inputs: 4 Has DC Fuses: No Connector Type: MC4 General Weight: 23kg Transformer: None Has Integrated DC Switch: Yes Warranty: 5 Years

Solis inverter 20kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-20K-DC #4: S5-GR3P20K-DC Solis 20kW Data Sheet Solis 20kW Manual Solis Inverter 20kW Warranty Solis 20kW G100 Certification   Extended 5yr warranty available here Solis Series 5 GR3P Three Phase Inverter – High Power & Efficient Solar Conversion The Solis Series 5 GR3P Three Phase Grid-Tied Inverter is a robust and high-performance solution for large-scale residential and commercial solar installations. Delivering up to 20kW of rated power, this inverter combines high efficiency, advanced safety features, and reliable performance for maximum energy yield. With a wide voltage range and IP66 rating, it is designed to operate in harsh conditions while ensuring long-term reliability. Key Features & Benefits ✔ Exceptional Efficiency & Performance Maximum efficiency of 98.7% for optimal energy production. Ultra-low start-up voltage of 180V and maximum PV input voltage of 1,100V. Maximum AC output power: 22kW. Supports Max PV DC Power: 30kW. ✔ Advanced Safety & Protection Type-II over-voltage surge protection for both DC and AC. Integrated AFCI (DC arc-fault circuit protection). DC reverse-polarity protection and integrated DC switch for safe operation. ✔ Flexible & Reliable Installation Four 16A PV string inputs with MC4 connectors included. IP66-rated enclosure ensures dust and water protection. NRS-097-2-1 certified for UK compliance. ✔ Smart Monitoring Register on SolisCloud for remote upgrades, monitoring, and control. Technical Specifications Rated Power: 20,000 W Phases: 3 Min MPPT Voltage: 180 V Max MPPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 30,000 W Max AC Power (5 min): 22,000 W Surge AC Power (1 sec): 22,000 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98.1% Transformer: None MPPT Quantity: 2 Weight: 22.94 kg Warranty: 5 years Why Choose Solis Series 5 GR3P? Delivers high-efficiency energy conversion for large solar systems. Advanced safety features like AFCI and surge protection ensure reliable operation. IP66-rated and NRS-certified for installation in harsh UK conditions. Compatible with SolisCloud for remote monitoring and upgrades. ⚡ Maximise your solar energy output with the Solis Series 5 GR3P Three Phase Inverter – a powerful, efficient, and reliable choice for residential and commercial installations.

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Fox Hybrid Single-Phase AC Inverter – Expandable Solar Energy Solution The Fox Hybrid Single-Phase AC Inverter combines high efficiency, flexible expansion, and smart monitoring to optimise your solar energy system. Compatible with Cube & EP5/11 batteries, this inverter is perfect for residential and small commercial installations. Key Features Easy Installation Quick and straightforward setup for hassle-free integration. High Voltage & Dual MPPT Dual MPPT design ensures maximum solar energy production. High round-trip efficiency of 97% maximises energy savings. Remote Monitoring Monitor your system in real-time via Wi-Fi for performance tracking and updates. Durable & Weatherproof IP65-rated for indoor and outdoor installation. What’s Included CT Clamps Wi-Fi Stick Additional Requirements Second CT clamp for additional generator sets (PV, wind, or others). Energy meter between inverter and incoming power connection if the distance exceeds 30m. Technical Specifications Weight: 23 kg Rated Power: 6,000 W Minimum MPPT Voltage: 80 V Maximum MPPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Maximum Input Voltage: 600 V Max DC Power (5 minutes): 9,000 W Max AC Power (5 minutes): 6,000 W Surge AC Power (1 second): 6,600 W Maximum DC Current: 32 A Maximum DC Inputs: 2 Connector Type: MC4 (4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years Why Choose the Fox Hybrid Inverter? The Fox Hybrid Single-Phase AC Inverter delivers reliable, efficient, and scalable solar power management. Its high voltage design, dual MPPT, and remote monitoring capabilities make it an ideal choice for homeowners and businesses looking to expand their solar energy systems while maximising efficiency and savings. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox ESS 12.0kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-12.0 Inverters - Main Units Fox T Series 12.0kW Datasheet Fox T Series 12.0kW Install Guide Fox T Series 12.0kW Warranty Fox T Series 12.0kW G99 Certificate   FoxESS T Series 12kW 3-Phase Inverter – Reliable and Scalable Energy Solution The FoxESS T Series is a high-performance 3-phase hybrid inverter, ideal for residential homes and small commercial installations. Designed for flexibility and efficiency, the T Series supports dual MPPT ranges from 6.0 kW to 25.0 kW, enabling optimal solar energy harvest for varying PV configurations. Key Features: Plug-and-Play Installation: Quick and hassle-free setup IP65 Rated: Suitable for outdoor installations Remote Monitoring: Manage your system from the FoxESS Cloud High Efficiency: 98.6% round-trip efficiency for minimal energy loss Dual MPPT: Ensures maximum power extraction from your solar array Technical Specifications: Weight: 17 kg Rated Power: 12,000 W MPPT Voltage Range: 140 – 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 18,000 W Max AC Power (5 Minutes): 12,000 W Surge AC Power (1 Second): 13,200 W Max DC Current: 14 A Max DC Inputs: 2 DC Fuses: 2 Connector Type: MC4 (2 included) Euro Efficiency: 97.8% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years The FoxESS T Series 12kW inverter provides scalable energy storage options and high-performance solar integration, making it a reliable choice for efficient, future-proof solar systems. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Solis 6.0kW Plus Single Phase S6 Low Voltage Hybrid Inverter #2: SOL-S6-EH1P6K-L-PLUS-5Y   Solis 6kW S6 Plus Inverter Data Sheet Solis S6 Hybrid Plus User Manual Solis Inverter 6kW Warranty   Solis S6-EH1P6K-L-PLUS 6kW Hybrid Inverter – Advanced Energy Storage & Backup Solution The Solis S6-EH1P6K-L-PLUS Hybrid Inverter is a powerful 6kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems. Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability. High Solar Utilisation & Future-Ready PV Compatibility 160% PV Oversizing Support The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day. Compatible with Next-Generation Solar Modules With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels. Reliable Backup & Off-Grid Capability Powerful Off-Grid Performance The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems. Seamless Grid Transition With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages. Flexible Battery Integration Wide Battery Compatibility Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions. Customisable Backup Settings Users can define battery backup levels to prioritise essential loads and extend available backup time. Intelligent Energy Management Smart Load Control Integrated smart load management ensures critical appliances receive priority power during backup operation. AI-Powered & VPP Ready Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services. System Expansion & Generator Support Parallel System Capability Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations. Generator Integration Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups. Built for Durability & Easy Operation Industrial-Grade LCD Display The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration. IP66 Environmental Protection With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments. Technical Specifications Electrical Performance Rated Power: 6,000 W Maximum PV Oversizing: 160% Maximum PV Input Current: 21 A Off-Grid Overload Capability: 200% for 10 seconds Battery Compatibility Supported Battery Voltage: 40V – 60V System Features Parallel Operation: Up to 6 units Grid Switching Time: <10 ms Generator Support: Yes Physical Details Supplier Part Number: SOL-S6-EH1P6K-L-PLUS-5Y Weight: 23 kg Why Choose the Solis S6-EH1P6K-L-PLUS Hybrid Inverter? ✔ 6kW hybrid inverter for solar and battery systems✔ 160% PV oversizing for increased solar generation✔ Seamless grid-to-backup switching in under 10ms✔ Wide battery compatibility (40V–60V)✔ Smart load management and AI-powered optimisation✔ Expandable system with up to 6 units in parallel✔ Durable IP66 protection for outdoor installations

SolarEdge 6kw Three Phase on grid 6000w solar Inverter 1: SE-6000-3PH-APP Inverters - Main Units#4: SE6K-RW0TEBEN4 SolarEdge 10kw Data Sheet SolarEdge 10kw User Manual SolarEdge G100 Certificate   Rating: 6,000WPhases: 3Solar Edge 6000 3phase inverter with Set APP function (no display) SolarEdge 6kW Inverter – Single Phase ⚠️ Important: This inverter has no MPPT trackers and requires SolarEdge power optimisers to function. The SolarEdge 6kW single-phase inverter combines advanced digital control technology with a high-efficiency, single-stage power conversion architecture. Designed specifically to work with SolarEdge power optimisers, this inverter ensures maximum solar power harvesting and industry-leading reliability. The innovative fixed-voltage technology allows the inverter to always operate at its optimal input voltage, regardless of string size or environmental conditions—providing consistent performance and efficiency. 🔑 Key Features Requires SolarEdge Power Optimisers (not included) Superior energy harvesting with fixed-voltage technology High efficiency with simplified architecture Designed for long-term reliability and durability Integrated DC switch for safety and maintenance Backed by a 12-year warranty (extendable options available) 📊 Technical Specifications Weight: 16.4 kg Rated AC Power: 6,000 W Euro Efficiency: 97.3% Min / Max Input Voltage (PPT): 750 V – 900 V Max DC Power: 10,000 W Max DC Current: 10 A Max Input Voltage: 900 V Max DC Inputs: 2 Transformer: None (transformerless design) Integrated DC Switch: Yes MPPT Trackers: 0 (optimiser required) Warranty: 12 years ✅ Ideal for residential and small commercial solar systems where SolarEdge optimisers are used for enhanced monitoring, safety, and efficiency.

LuxpowerTek GEN3 3-6Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter - WiFi dongle included Smart hybrid inverter set to the size required for G99. Once set upon installation this can't be changed #12: INV-LUX-GEN3-6KW-SPH-BLK Luxpower 3.6-6kW Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products   Fogstar-LuxpowerTek GEN3-LB-EU Hybrid Inverter - 3kW to 6kW Powerful next-generation hybrid inverter technology with dual MPPT solar inputs, high-current 48V battery support, generator integration and ultra-fast backup switching. The Fogstar-LuxpowerTek GEN3-LB-EU is a high-performance single-phase hybrid inverter designed for residential solar PV and battery storage systems. Available in 3kW, 3.6kW, 4kW, 4.6kW, 5kW and 6kW models, the GEN3 range is engineered for seamless integration with Fogstar 48V (51.2V) battery systems. With up to 12kW of solar PV input, two independent MPPTs and up to 125A battery charge and discharge capability, the GEN3 provides powerful energy management within a compact IP66-rated enclosure. Designed for both on-grid and off-grid applications, it also features generator integration, rapid 7ms backup switching and support for up to 16 inverters operating in parallel. Key Features 3kW, 3.6kW, 4kW, 4.6kW, 5kW and 6kW models Single-phase 230V hybrid inverter Compatible with Fogstar 48V (51.2V) batteries 2 independent MPPT solar inputs Up to 12kW maximum PV input Up to 125A battery charge and discharge current Up to 6kW battery charge and discharge power Generator input up to 12kW Fast 7ms backup switching Double-rated surge power for up to 1 second Supports up to 16 inverters in parallel On-grid and off-grid operation IP66-rated enclosure Integrated DC switch Type II AC and DC surge protection Wi-Fi, RS485 and CAN communication 5 or 10-year warranty options Fogstar Battery Integration The GEN3-LB-EU is designed around 48V low-voltage battery storage and provides seamless integration with compatible Fogstar Energy batteries. High-current battery support enables rapid charging from surplus solar generation, off-peak grid electricity or a connected generator. Battery specifications: Nominal battery voltage: 48V Battery operating range: 40-60V Maximum charge/discharge current: 80-125A, model dependent Maximum charge/discharge power: 3.6-6kW, model dependent Battery force wake-up from PV, grid or generator Solar PV Input Dual independent MPPTs provide flexible solar array design and allow separate PV strings to operate independently, making the GEN3 particularly suitable for east/west roofs, different roof pitches and multiple solar orientations. Maximum PV input: 6,600-12,000W, model dependent Rated PV input voltage: 360V Maximum PV input voltage: 530V MPPT operating range: 60-425V Start-up voltage: 50V Number of MPPTs: 2 MPPT configuration: 1 / 1 Maximum PV input current: 20A per MPPT Maximum PV short-circuit current: 32A per MPPT MPPT efficiency: 99.9% Generator Integration Integrated generator support allows the GEN3 to manage power from solar PV, battery storage, the electricity grid and a generator within one energy-management system. With generator input of up to 12kW, it provides additional flexibility for properties requiring greater energy independence or backup capability. Fast Backup Power The GEN3 provides rapid 7ms backup switching during a grid outage. Its double-rated surge capability for up to one second also provides additional support for appliances and electrical equipment with higher start-up power requirements. Expandable up to 16 Inverters For larger installations, up to 16 GEN3 inverters can operate in parallel. This provides a scalable platform for systems requiring greater inverter capacity and allows energy-storage installations to be expanded as requirements increase. Efficiency and Protection Maximum inverter efficiency: 97.0% EU efficiency: 95.9% MPPT efficiency: 99.9% Maximum charge/discharge efficiency: 95.0% Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Ground-fault monitoring Grid monitoring Integrated DC switch Type II AC/DC surge protection Optional AFCI arc-fault protection Build and Installation The GEN3 combines a compact, installer-friendly design with comprehensive communication and monitoring capabilities. IP66-rated enclosure Smart cooling system Integrated LCD display RS485, Wi-Fi and CAN communication Noise level: less than 50dB Operating temperature: -25°C to +60°C Maximum operating altitude: 4,000m Relative humidity: 0-100% Dimensions: 416 x 538.5 x 229.5mmWeight: 22.5kgWarranty: 5 or 10 years UK Compliance The Fogstar-LuxpowerTek GEN3-LB-EU range is designed to meet relevant UK and European electrical, safety and grid requirements, including G99 and G100. Why Choose the Fogstar-LuxpowerTek GEN3? The Fogstar-LuxpowerTek GEN3 combines a hybrid solar inverter, high-current battery management, backup capability and generator integration within one flexible energy-storage platform. With up to 12kW of PV input, dual MPPTs, 125A battery charging, 7ms backup switching and six inverter sizes from 3kW to 6kW, it is an excellent solution for residential solar and battery storage installations requiring performance, flexibility and future expansion.

Sunsynk ACURE 3.6Kw On & Off grid Hybrid solar & wind Inverter WiFi Included   #5/20/22: SUNSYNK SUNC1−3.6LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly Expandable System – Connect up to 10 wireless smart switches for tailored load control Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board Advanced Connectivity – Built-in Bluetooth, Wi-Fi,  & LAN (Ethernet)  Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Fogstar-LuxpowerTek 6Kw  Single Phase Low Voltage On/Off-grid Hybrid Inverter  - WiFi dongle included #12: INV-LUX-GEN2-6KW-SPH-WH Luxpower 6kw Hybrid Data Sheet  Luxpower Hybrid Manual *Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products The Fogstar-LuxPowerTek GEN2-LB-EU 6K is a powerful 6kW single-phase hybrid solar inverter, designed for residential solar PV and battery storage systems. Built on proven LuxPowerTek technology, it offers excellent performance for on-grid, backup and off-grid applications and is configured for seamless integration with compatible Fogstar 48V / 51.2V lithium battery systems. Combining dual MPPT solar inputs, up to 6kW battery charge and discharge power, intelligent energy management and parallel capability, the GEN2-LB-EU 6K provides a flexible and scalable solution for modern home energy storage installations. Its robust IP66-rated enclosure, comprehensive protection features and wide operating temperature range make it suitable for demanding installations, while multiple communication options provide straightforward system monitoring and battery integration. Backed by an industry-leading 10-year warranty for long-term reliability and peace of mind. Key Features 6kW single-phase hybrid inverter Compatible with 48V / 51.2V low-voltage battery systems Optimised for compatible Fogstar battery storage Dual MPPT solar inputs for flexible PV array design Up to 6,000W battery charge/discharge power Up to 140A maximum battery discharge current Up to 125A maximum battery charge current Suitable for on-grid and off-grid operation Parallel capability for scalable installations PV force wake-up supported IP66-rated enclosure Integrated LCD display with RGB status indicators RS485, Wi-Fi and CAN communication Integrated DC isolator Low operating noise of <40dB 10-year warranty Battery & Power Performance The GEN2-LB-EU 6K is designed around a 48V nominal low-voltage battery architecture, making it an excellent choice for high-capacity residential battery storage systems. Nominal battery voltage: 48V Battery operating range: 40–60V Maximum discharge current: 140A Maximum charge current: 125A Maximum charge/discharge power: 6,000W PV force wake-up: Supported The high battery current capability allows the inverter to deliver strong charge and discharge performance, helping households maximise solar self-consumption, make use of off-peak electricity tariffs and provide stored energy when required. Solar PV & Hybrid Operation With two independent MPPT trackers, the LuxPowerTek GEN2-LB-EU 6K provides greater flexibility when designing solar arrays across different roof orientations or operating conditions. As a true hybrid inverter, it intelligently manages energy between the solar PV array, battery storage system, household loads and electricity grid, helping maximise the amount of renewable energy used within the property. Build & Installation Designed with installers in mind, the GEN2-LB-EU 6K combines a compact form factor with durable construction and straightforward connectivity. Protection rating: IP66 Cooling: Smart cooling system Topology: Transformerless Display: LCD with RGB indicators Communications: RS485, Wi-Fi and CAN Noise emission: <40dB Maximum operating altitude: 2,000m Dimensions: 440 × 528 × 220mm Weight: 25kg Operating temperature: -25°C to +60°C Relative humidity: 0–100% Efficiency High conversion efficiency helps maximise the usable energy generated and stored by the system. Maximum inverter efficiency: 97.3% Maximum charge/discharge efficiency: 94.5% Integrated Safety & Protection The LuxPowerTek GEN2-LB-EU 6K incorporates comprehensive electrical and system protection, including: PV reverse-polarity protection Overcurrent protection Overvoltage protection Anti-islanding protection AC short-circuit protection Leakage-current protection Ground-fault monitoring Grid monitoring Integrated DC switch Type III AC/DC surge protection UK Grid Compliance & Certification The GEN2-LB-EU 6K is designed to meet relevant UK and international grid, electrical safety and inverter standards, including: G98, G99, EN 62109, EN 61000, IEC 62116, IEC 61727, IEC 61683 and CEI 0-21, together with applicable related standards. Why Choose the LuxPowerTek GEN2-LB-EU 6K? For homeowners and installers looking for a 6kW hybrid inverter with 48V battery compatibility, the GEN2-LB-EU 6K offers an attractive combination of high battery power, flexible solar integration and robust protection. Its compatibility with Fogstar battery systems makes it particularly well suited to high-capacity, cost-effective home energy storage, while parallel capability provides additional flexibility for systems that may need to expand in the future. Ideal for: residential solar PV, home battery storage, time-of-use tariff charging, increased solar self-consumption, backup power and suitable off-grid applications.

Solis inverter S6 8.0kW Triple MPPT - Single Phase with DC #2: SOL-8.0-S6-TT-DC Solis Warranty   The Solis SOL-8.0-S6-TT-DC PV Inverter is a powerful and efficient single-phase inverter designed for high-capacity residential and light commercial solar PV systems. With a rated output of 8,000W, it delivers outstanding energy conversion, advanced MPPT control, and flexible system design for demanding UK solar installations. Developed by Solis, one of the world’s leading inverter manufacturers, this model combines cutting-edge research with proven field reliability. Advanced Engineering & Global Expertise Designed by a World-Class R&D Team Solis inverters are engineered by an international team of professors and specialists from 8 countries, ensuring world-class product design, durability, and performance. Proven Quality & Reliability Praised globally for high quality and long-term reliability, Solis inverters are trusted in residential, commercial, and utility-scale projects worldwide. High Performance & Energy Optimisation Exceptional Conversion Efficiency With a Euro efficiency of 97.3% and peak efficiencies exceeding 97%, this inverter ensures maximum usable energy from your solar array. Precise MPPT Algorithm The advanced MPPT control dynamically tracks the optimal operating point of your PV modules, maximising energy harvest throughout the day in changing UK weather conditions. Ultra-Wide Voltage Range Supporting a wide MPPT voltage range from 90V to 520V, this inverter offers excellent flexibility for array design and improved low-light performance. Installation Flexibility & System Design Triple DC Input for Complex Layouts Featuring 3 DC inputs and 2 MPPTs, the SOL-8.0-S6-TT-DC allows for multiple string configurations, ideal for roofs with different orientations or shading zones. Integrated Safety & Simplicity The built-in DC switch enhances system safety and simplifies maintenance, while MC4 connectors ensure secure and reliable connections. Technical Specifications Electrical Ratings Rated Power: 8,000 W Max DC Power: 10,400 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,000 W Max Input Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V MPPT Voltage Range: 90 – 520 V Max DC Current: 37.5 A System Configuration Phases: Single Phase MPPT Quantity: 2 Max DC Inputs: 3 Has Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 4 Transformer: None Efficiency & Physical Details Euro Efficiency: 97.3% Weight: 12.5 kg Warranty: 5 Years Why Choose the Solis SOL-8.0-S6-TT-DC? ✔ Ideal for large residential and light commercial systems✔ High efficiency with precise MPPT tracking✔ Flexible design with triple DC input✔ Wide voltage range for superior performance✔ Backed by world-class R&D and global reliability✔ Excellent performance-to-cost ratio  

Fox 15kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-15.0 Inverters - Main Units Fox T Series 15.0kW Datasheet Fox T Series 15.0kW Install Guide Fox T Series 15.0kW Warranty Fox T Series 15.0kW G99 Certificate Fox ESS T Series 15kW 3-Phase Grid-Tied Inverter The Fox ESS 15kW T Series Inverter is a high-performance grid-tied inverter, engineered for 3-phase residential homes and small-scale commercial installations. With its dual MPPT design, robust build, and cloud connectivity, this inverter delivers exceptional efficiency and reliability. The T Series ranges from 6.0kW to 25.0kW, making it a versatile solution for a wide range of solar PV systems. Key Features Powerful 15kW output – ideal for residential and light commercial applications Dual MPPT design – ensures maximum solar generation efficiency Plug-and-play installation – quick, simple, and time-saving IP65 rated – suitable for both indoor and outdoor installations FoxESS Cloud monitoring – track system performance remotely from any device High efficiency – up to 98.6% round-trip efficiency Technical Specifications Rated Power: 15,000W Weight: 20kg Min PPT Voltage: 140V Max PPT Voltage: 1,100V DC Startup Voltage: 140V DC Shutdown Voltage: 1,100V Max Input Voltage: 1,100V Max DC Power: 22,500W Max AC Power (5 Minutes): 15,000W Surge AC Power (1 Second): 16,500W Max DC Current: 28A Max DC Inputs: 4 DC Fuses: 4 Connector: MC4 (4 included) Euro Efficiency: 97.8% Transformer: N/A MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 8kw Single Phase HD Wave on grid solar Inverter #1: SE-8000H-APP Inverters - Main Units#4: SE8000H-RW000BEN4 SolarEdge 8kw Data Sheet SolarEdge 8kw Manual SolarEdge 8kw Warranty SolarEdge 8kw G100 Certificate   Rating: 8,000WPhases: 1Single Phase Inverters with HD-Wave Technology and SetAPP The SolarEdge single phase inverter with HD-Wave technology breaks the mould of traditional solar inverters. Winner of the prestigious 2016 Intersolar Award and the renowned 2018 Edison Award, the single phase Inverter is specifically designed to work with SolarEdge power optimizers and features a standard 12-year warranty extendable to 20 or 25 years.SolarEdge's Innovative Inverter TopologyMPPT in Optimisers means inverter is only responsible for DC to AC inversion. This means inverter is simpler, more cost effective and more reliable. The fixed string voltage ensures operation at the highest efficiency at all times independent of string length and temperature.HD-Wave Technology: A New Era for PV InvertersLatest generation inverter HD-Wave technology means the inverters can be smaller and lighter than ever. The record-breaking 99% efficiency allows more energy production for an improved ROI.Easy Inverter Commissioning with Inverter SetAppSolarEdge single phase inverters have not display. They use a smart new commissioning method directly through a smartphone using the intuitive SetApp mobile application.   Weight: 16.5 kgRated Power: 8,000 WMin PPT Voltage: 0 VMax PPT Voltage: 0 VDC Startup Voltage: 0 VDC Shutdown Voltage: 0 VMax Input Voltage: 480 VMax DC Power: 16,000 WMax AC Power (5 Minutes): 8,000 WSurge AC Power (1 Second): 8,000 WMax DC Current: 20.5 AMax DC Inputs: 3Has DC Fuses: 0Connector: MC4Included Connectors: 6Euro Efficiency: 99 %Transformer: NoneMPPT Quantity : 0Has Integrated DC Switch: YesWarranty: 12 years

Sunsynk ACURE 5Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC1−5.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly Expandable System – Connect up to 10 wireless smart switches for tailored load control Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board Advanced Connectivity – Built-in Bluetooth, Wi-Fi,  & LAN (Ethernet)  Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

EcoFlow PowerOcean:  1ph Inverter Smart Home Energy    #3: 6861 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-98 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Take control of your energy future with the EcoFlow PowerOcean 3.68kW Hybrid Inverter—a powerful and intelligent solar inverter designed for modern UK households. Combining high-efficiency solar energy conversion, advanced lithium iron phosphate (LFP) battery compatibility, and industry-leading safety features, PowerOcean is your foundation for power independence. Whether you’re powering a compact flat or a large residential property, EcoFlow PowerOcean offers unmatched scalability, reliability, and control through the EcoFlow App and Web Portal. Enjoy seamless energy monitoring, battery management, and solar optimisation—all from your smartphone. Key Features Scalable Battery Storage: Expandable up to 15kWh with over 6,000 charge cycles for long-term reliability. Smart Monitoring: View real-time power usage, solar input, and battery status via the EcoFlow App and Web Portal. Advanced Safety Features: Built with LFP battery tech, a fire prevention module, and IP65-certified weatherproof housing. 15-Year Warranty: Confidence backed by a long-term manufacturer guarantee. Plug-and-Play Expansion: Future-proof design ensures easy upgrades with additional battery modules. Technical Specifications DC Attributes Max PV Power: 3.68kW Max Voltage: 600V Max Isc (Short Circuit Current): 20A Max Current (per MPPT): 18A (1x PV input) 16A (2x PV input) No. of MPPTs: 2 MPPT Voltage Range: 90–520V AC Attributes Max AC Output Power: 3.68kW Max Current: 18.4A Number of Phases: 1 System Information Max Efficiency: 96.5% IP Rating: IP65 (Dust-tight & weatherproof for outdoor use) Weight: 20.6kg Dimensions: 679.6 × 182.7 × 280mm What's In the Box? 1 x EcoFlow PowerOcean 3.68kW single phase hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 3.68kW Inverter? If you’re a homeowner in the UK looking to reduce reliance on the grid, store more of your solar energy, gain reliable backup, and invest in a system that can grow with you, the EcoFlow PowerOcean 3.68 kW Single Phase Hybrid Inverter is a strong choice. Its combination of smart tech, safety features and scalability make it more than just a basic inverter—it’s a long‑term energy platform.

Solis S6 6kW 3PH High Voltage  Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-6.0K-H-EU  Storage Systems - Hybrid Inverter Solis S6 6kW Inverter Data Sheet Solis S6 6kW Inverter Manual & Install Guide Solis S6 6kW Inverter Warranty Solis S6 6kW G100 Certificate Eastron 3ph meter included  Solis S6 Hybrid Inverter – High-Performance Solar & Battery Solution Please note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3-phase meter from Eastron for easy monitoring and energy management. The Solis S6 Hybrid Inverter offers ultimate flexibility with its 3 or 4 MPPTs (Maximum Power Point Trackers), ensuring compatibility with modern high-performance solar modules. Its advanced design allows selected loads to continue receiving power during a grid outage thanks to its integrated emergency switching device. Key Features of the Solis S6 Hybrid Inverter Multiple MPPTs for Flexible Array Design Integrated 3 or 4 MPPTs to support different solar array orientations Maximizes energy harvest from varied roof layouts High Battery & Power Handling 50A per 10kW maximum charge/discharge rating Compatible with multiple lithium battery brands Enhanced battery protection features to prolong battery life Smart Energy Management Automatic UPS switching for uninterrupted power supply Supports peak shaving mode to reduce electricity costs Handles unbalanced and half-wave loads on grid and backup ports Installation-Friendly Design Pre-made battery, meter, and CAN cabling to reduce installation time MC4 connectors included for simple setup Technical Specifications Specification Details Weight 31.8 kg Rated Power 6,000 W MPPT Voltage Range 160 V – 850 V DC Startup Voltage 160 V DC Shutdown Voltage 160 V Max Input Voltage 1,000 V Max DC Power 9,600 W Max AC Power (5 min) 6,600 W Surge AC Power (1 sec) 7,200 W Max DC Current 48 A Max DC Inputs 3 DC Fuses 0 Connector Type MC4 Euro Efficiency 97.7% Transformer N/A MPPT Quantity 3 Integrated DC Switch Yes Warranty 5 years Why Choose the Solis S6 Hybrid Inverter? The Solis S6 Hybrid is perfect for residential and commercial solar systems seeking reliable, high-efficiency energy conversion. With its combination of multiple MPPTs, UPS capabilities, and advanced battery protection, it offers maximum energy yield, flexible installation, and uninterrupted backup power. Order now from ITS Technologies, your trusted UK supplier for solar inverters, battery storage, and smart energy solutions.

Fox 7kW K Series Single Phase Hybrid Inverter 2: FE-KH1-7.0 Storage Systems - Hybrid Inverter #3 5986 Fox K Series 7kW Datasheet Fox K Series 7kW Manual Fox K Series 7kW Warranty Fox K Series7kW G100 Certification FoxESS KH7 7kW Single-Phase Hybrid Inverter The FoxESS KH7 is a sleek 7kW single-phase full hybrid inverter built with IP65 protection and high-voltage battery compatibility. Designed for maximum efficiency, it delivers a 97.4% round-trip efficiency, ensuring you get the best performance from your solar installation. Its triple MPPT design allows for optimal solar production even with panels on multiple roof orientations, while its expandable battery capacity makes it a flexible and future-proof solution. Key Features IP65 Rated – dust and water resistant, perfect for outdoor installation Remote Monitoring – manage and track system performance anywhere Expandable Storage – compatible with all Cube & EP batteries Triple MPPT Design – ensures maximum energy harvest from multiple arrays High Round-Trip Efficiency – up to 97% system efficiency Plug & Play Installation – supplied with CT clamps and meter for convenience Included in the Box CT Clamps Meter Technical Specifications Weight: 29 kg Rated Power: 7,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 minutes): 10,500 W Max AC Power (5 minutes): 7,000 W Surge AC Power (1 second): 7,700 W Max DC Current: 48 A Max DC Inputs: 3 DC Fuses: None Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 3 Integrated DC Switch: Yes Warranty: 5 years Why Choose the FoxESS KH7? The FoxESS KH7 inverter combines high efficiency, expandability, and smart monitoring in a compact design. It’s the ideal choice for homeowners and small businesses seeking to maximize solar production and ensure long-term reliability with flexible battery storage options. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10 kWh Three Phase on grid solar Inverter #1: SE-10000-3PH-APP Inverters - Main Units #4: SE10K-RW0TEBEN4 SolarEdge 10kWh Data Sheet SolarEdge 10kWh User Manual SolarEdge G98 Certificate   SolarEdge SE10K 10kW Three-Phase Inverter (SetApp, No Display) ⚠️ Important: This inverter has no MPPT trackers and requires SolarEdge Power Optimisers to operate. The SolarEdge SE10K three-phase inverter delivers advanced solar energy conversion with a streamlined, single-stage architecture. Designed to work exclusively with SolarEdge power optimisers, it ensures maximum system efficiency, safety, and reliability for residential and commercial installations. Thanks to fixed-voltage technology, the inverter consistently operates at its optimal input voltage, independent of string length or environmental factors. The SetApp configuration (via smartphone) replaces the traditional screen, offering a simple and modern commissioning process. 🔑 Key Features Requires SolarEdge Power Optimisers (not included) Modern SetApp commissioning (no screen required) Fixed-voltage technology for consistent efficiency One-stage power conversion for improved reliability High energy harvesting even in complex designs Integrated safety features, including DC switch Backed by a 12-year warranty (extendable options available) 📊 Technical Specifications Rated AC Power: 10,000 W Phases: 3 Euro Efficiency: 97.3% Minimum / Maximum Input Voltage (PPT): 750 V – 900 V Max DC Power: 15,500 W Max DC Current: 15 A Max Input Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V MPPT Trackers: 0 (optimiser required) DC Inputs: 2 Has Integrated DC Switch: Yes Weight: 17.6 kg Warranty: 12 years ✅ Perfect for larger residential or commercial PV systems where SolarEdge optimisers are used for maximum yield, module-level monitoring, and safety compliance.

Solis inverter 25kW S5 3 Phase Triple MPPT - DC #1: SOL-S5-GC25K-DC #4: S5-GC25K-DC Solis 25kW Data Sheet Solis 25kW Manual Solis 25kW Warranty   Solis S5-GC25K – 25kW Three Phase Grid-Tied Inverter The Solis S5-GC25K is a high-performance, three-phase grid-tied inverter designed for commercial and industrial solar PV installations. With advanced features, robust construction, and precise MPPT control, it maximises solar energy generation while ensuring safety and reliability. ⚡ Key Features Rated Power: 25,000W with max AC output of 27.5kW High Efficiency: Max efficiency of 98.5%, Euro efficiency 98.1% Three MPPT Design: Reduces string mismatch with two DC inputs per MPPT Wide Voltage Range: Start-up voltage 180V, max PV input 1,100V Integrated Safety Features: DC reverse-polarity protection, Type-II surge protection, and AFCI (arc-fault circuit protection) IP66-Rated: Weatherproof for reliable outdoor installation Smart Monitoring: Compatible with SolisCloud for remote monitoring, diagnostics, and firmware upgrades Integrated DC Switch: Ensures safe maintenance operations 🔧 Technical Specifications Weight: 66 kg Rated Power: 25,000 W Min/Max PPT Voltage: 200–1,000 V DC Startup/Shutdown Voltage: 200/180 V Max DC Power: 37,500 W Max AC Power (5 min): 25,000 W Surge AC Power (1 sec): 27,500 W Max DC Current: 96 A DC Inputs: 6 Connectors: MC4 (12 included) Transformer: None Warranty: 5 years standard ✅ Why Choose Solis S5-GC25K? Ideal for commercial-scale solar installations, the S5-GC25K offers high efficiency, multiple MPPTs, and integrated safety features, making it a future-proof, reliable solution for maximising solar power output and system longevity.

Fox 8kW K Series Single Phase Hybrid Inverter #2: FE-KH1-8.0 Storage Systems - Hybrid Inverter Fox K Series 8.0kW Datasheet Fox K Series 8.0kW Manual Fox K Series 8.0kW Warranty Fox K Series 8.0kW G100 Certificate The FoxESS KH8 is a powerful and sleek 8kW single-phase full hybrid inverter, designed to deliver maximum efficiency and flexibility for UK solar PV systems. With support for high-voltage battery storage, triple MPPT design, and advanced monitoring via the FoxESS Cloud, it ensures optimal solar production and intelligent energy management. Engineered for long-term performance and easy installation, the FoxESS KH8 is the ideal choice for homeowners seeking to reduce grid reliance and expand energy storage capacity over time. Key Features ✅ Easy to Install – compact and user-friendly design ✅ IP65 Rated – weatherproof for indoor or outdoor use ✅ FoxESS Cloud Remote Monitoring – track and manage energy performance anywhere ✅ Scalable Battery Options – compatible with all FoxESS Cube & EP batteries ✅ Triple MPPT – maximises yield from different roof orientations ✅ High Round-Trip Efficiency – up to 97% for optimal energy use ✅ CT Clamps and Meter Included – everything you need in the box Technical Specifications General Weight: 29 kg Rated Power: 8,000 W Euro Efficiency: 97.4% Warranty: 5 years Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Connections Max DC Inputs: 3 Connector: MC4 (6 included) Has Integrated DC Switch: Yes DC Fuses: No Transformer: None MPPT Quantity: 3 Why Choose the FoxESS KH8 Hybrid Inverter? Designed with UK solar PV systems in mind Provides scalable storage options for future energy needs Offers reliable outdoor performance with IP65 protection Delivers high-efficiency solar conversion with triple MPPT Backed by 5-year manufacturer’s warranty for peace of mind ✅ The FoxESS KH8 is the perfect 8kW hybrid inverter for maximising solar energy, integrating flexible battery storage, and building a future-ready energy system. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox ESS 25.0kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-25.0 Inverters - Main Units Fox T Series 25.0kW Datasheet Fox T Series 25.0kW Installation Manual Fox T Series 25.0kW User Manual Fox T Series 25.0kW Warranty Fox T Series 25.0kW G99 Certificate Fox Battery Sizing Guide   FoxESS T Series – 3-Phase Hybrid Inverter (25 kW) The FoxESS T Series range is ideal for 3-phase residential homes and small-scale commercial installations. Featuring dual MPPT technology, this inverter supports systems from 6.0 kW up to 25.0 kW, delivering high efficiency, reliability, and flexible energy management. Features Easy Plug & Play Installation – Quick and simple setup. IP65 Rated – Suitable for indoor and outdoor environments. Remote Monitoring – Monitor system performance via the FoxESS Cloud. High Efficiency – Round-trip efficiency up to 98.6%. Technical Specifications Weight: 21 kg Rated Power: 25,000 W Min MPPT Voltage: 140 V Max MPPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 27,500 W Max DC Current: 28 A Max DC Inputs: 4 DC Fuses: 4 Connector Type: MC4 Included Connectors: 4 Euro Efficiency: 97.8% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10,000W Home Wave Inverter - Three Phase   SolarEdge 10kW 3-Phase Inverter – Network Ready, SetApp Enabled The SolarEdge SE-10000-3PH-NET inverter is a high-efficiency, network-ready 3-phase inverter designed for commercial and larger residential solar PV systems. Built with fixed-voltage technology and digital control architecture, it ensures maximum energy harvest while maintaining best-in-class reliability. Please note: This inverter does not include an integrated display and requires SolarEdge Power Optimizers to function. Key Features: High Efficiency: Advanced power conversion architecture for superior solar harvesting Fixed-Voltage Technology: Ensures optimal input voltage for consistent energy output SetApp Enabled: Quick and easy commissioning using the SolarEdge SetApp Network Ready: Seamless integration for system monitoring and performance tracking UK Compliant: Tested to G98/G99 standards with latest firmware Compact & Reliable: Durable design for long-lasting operation Technical Specifications: Part Number: SE-10000-3PH-NET Rated Power: 10,000 W Phases: 3 MPPT Trackers: None (requires Power Optimizers) Weight: [Add weight if known] Firmware Update Required: Yes, during SetApp commissioning Warranty: [Add warranty if available] Ideal for installers and system owners seeking a robust, network-enabled 3-phase inverter solution for large solar PV arrays, with all the benefits of SolarEdge monitoring and optimization.

Fox 10kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.0 Storage Systems - Hybrid Inverter#3: 5989 Fox 10.0kW Datasheet Fox 10.0kW Manual Fox 10.0kW Warranty Fox 10.0kW G100 Certificate FoxESS KH10 – 10kW Single-Phase Hybrid Inverter The FoxESS KH10 is a high-performance, single-phase hybrid inverter designed to optimise solar energy usage in residential and small commercial installations. With IP65 rating, high-voltage battery compatibility, and 4 MPPT technology, this inverter maximises round-trip efficiency and ensures optimal energy production from your solar system. With remote monitoring via FoxESS Cloud and included CT clamp for zero-export control, the KH10 offers convenience, flexibility, and efficiency in one compact design. Key Features ✅ 10kW single-phase hybrid inverter – ideal for high-capacity solar systems ✅ High-voltage battery compatibility – works with Cube & EP batteries ✅ IP65 rated – suitable for outdoor installations ✅ Remote monitoring and control – via smartphone or web portal ✅ 4 MPPT's – ensures maximum solar production ✅ High round-trip efficiency – 97% for optimal energy usage ✅ Expandable battery capacity – add batteries as your energy needs grow ✅ CT clamp included – for zero-export functionality Technical Specifications General Weight: 29 kg Rated Power: 10,000 W Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 4 Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Connections Connector Type: MC4 Included Connectors: 8 DC Fuses: 0 Integrated DC Switch: Yes Why Choose the FoxESS KH10 Hybrid Inverter? Efficient energy conversion – get the most from your solar panels Scalable energy storage – compatible with multiple battery types User-friendly monitoring – control and track performance remotely Robust outdoor design – IP65 rating ensures durability Zero-export ready – included CT clamp for grid compliance ✅ The FoxESS KH10 10kW Hybrid Inverter is a high-efficiency, scalable solution that combines reliability, advanced monitoring, and maximum energy utilisation for residential and small commercial solar installations.

Solis S6 10kW 3PH High Voltage Hybrid Inverter (incl. 3PH meter)  #2: SOL-S6-EH3P-10.0K-UK  Storage Systems - Hybrid Inverter Solis S6 10kW Inverter Data Sheet Solis S6 10kW Inverter Warranty Solis S6 10kW G100 Certificate Eastron 3ph meter and (WiFi & LAN) data logger stick included   ⚡ Solis S6 10kW Three Phase Hybrid Inverter – 4 MPPT The Solis S6 10kW Three Phase Hybrid Inverter is a high-performance energy storage inverter designed for solar PV and battery storage systems. With 4 MPPTs, up to 20kW of DC input power and a 10kW charge/discharge rating, it provides flexible solar generation and energy storage management for a wide range of applications. Its multiple MPPT inputs make it particularly suitable for installations with multiple PV array orientations or complex roof layouts. The inverter also supports on-grid, backup and off-grid operating modes, with generator communication available for compatible off-grid applications. High-Performance Solar & Battery Storage 4 MPPTs for Flexible PV Array Design The inverter features 4 independent MPPTs, allowing solar arrays with different orientations or operating conditions to be managed more effectively. With support for up to 16A MPPT input current, the S6 is compatible with modern high-power PV modules, including 182mm and 210mm solar panels. Up to 200% DC Oversizing The inverter supports up to 200% DC oversizing, allowing a larger solar PV array to be connected relative to the inverter's rated AC output. Rated AC Power: 10,000W Maximum DC Power: 20,000W Maximum Input Voltage: 1,000V MPPT Quantity: 4 Maximum DC Current: 64A 🔋 Powerful Battery Charging & Backup Up to 10kW Charge & Discharge Power The Solis S6 supports up to 50A and 10kW maximum battery charge and discharge power, helping deliver strong battery performance for compatible energy storage systems. The inverter is compatible with multiple battery brands and models, providing greater flexibility when selecting a compatible battery storage solution. High Backup Power Capability With support for up to 10kW of backup loads, the inverter can help maintain power to supported loads during grid interruptions when installed as part of a correctly configured energy storage system. The system also supports unbalanced and half-wave loads on both the Grid Port and Backup Port. Reliable Backup & Off-Grid Operation UPS-Level Switching The inverter offers a switching time of less than 10ms, helping provide uninterrupted power for compatible critical loads when operating in backup mode. Generator Communication Support The S6 supports pure off-grid applications and generator communication, providing additional flexibility for systems requiring alternative power generation. Parallel System Expansion Up to 10 compatible inverter units can be connected in parallel on the Grid and Backup sides, allowing larger system capacities to be created for small to medium-scale commercial energy storage applications. Smart Monitoring & Remote Management SolisCloud App Connectivity The inverter can be monitored, controlled and upgraded remotely through the SolisCloud platform, helping reduce the need for unnecessary site visits. Remote monitoring allows users and installers to review system performance and manage compatible inverter settings through the connected platform. Multiple Operating Modes The inverter offers multiple working modes to support different solar generation, battery storage and backup power requirements. ⚠️ Advanced Safety & Reliable Design Integrated AFCI Protection The S6 features an integrated Arc Fault Circuit Interrupter (AFCI) function designed to actively detect potential arc faults within the PV array. Fanless Natural Convection Cooling The inverter uses a natural convection cooling design without external fans, reducing moving components while supporting reliable operation. Technical Specifications Product Details Product: Solis S6 Three Phase Hybrid Inverter Supplier Part Number: S6-EH3P10K-H-EU (700VDC) Rated Power: 10,000W Weight: 30.2kg Warranty: 5 Years Transformer: None Solar PV Input MPPT Quantity: 4 Maximum DC Inputs: 4 Minimum MPPT Voltage: 200V Maximum MPPT Voltage: 850V DC Start-Up Voltage: 160V DC Shutdown Voltage: 160V Maximum Input Voltage: 1,000V Maximum DC Power: 20,000W Maximum DC Current: 64A Maximum MPPT Input Current: Up to 16A per MPPT Connector Type: MC4 Included Connectors: 4 AC Output Rated Power: 10,000W Maximum AC Power (5 Minutes): 11,000W Surge AC Power (1 Second): 12,000W Euro Efficiency: 97.7% Installation Features Integrated DC Switch: Yes Cooling Method: Natural convection AFCI Protection: Integrated Parallel Operation: Up to 10 compatible units Why Choose the Solis S6 10kW Three Phase Hybrid Inverter? 10kW three-phase hybrid inverter 4 independent MPPTs for flexible solar array layouts Supports up to 20kW DC solar input Up to 200% DC oversizing Compatible with multiple battery models Up to 10kW battery charge and discharge power Supports up to 10kW backup loads UPS-level switching in less than 10ms Supports unbalanced and half-wave loads Pure off-grid capability with generator communication support Up to 10 compatible units in parallel Remote monitoring and upgrades via SolisCloud Integrated AFCI protection Fanless natural convection cooling design

SolarEdge 9000W Home Wave Inverter - Three Phase   #1: SE-9000-3PH-NET Inverters - Main Units SolarEdge 9000W Data Sheet SolarEdge 9000W Manual SolarEdge 9000W G100 Certificate SolarEdge Warranty SolarEdge 9000 3-Phase Inverter – High-Efficiency Solar Power Solution The SolarEdge 9000 3-Phase Inverter delivers superior solar power harvesting with a compact, efficient, and highly reliable design. Perfect for residential and light commercial solar installations, it works seamlessly with power optimisers to maximise energy production from each solar module. Key Features Fixed-Voltage Technology Ensures the inverter always operates at the optimal input voltage, regardless of string length or environmental conditions, for maximum efficiency and reliability. Optimiser-Ready Design This inverter requires SolarEdge power optimisers to function, enabling module-level performance monitoring and enhanced safety. Smart App Integration Compatible with SetAPP commissioning for easy configuration and monitoring. UK certified for G98 and G99 compliance (firmware must be updated during commissioning). Compact & Lightweight At 16.4 kg, the inverter is easy to install, even in tight spaces. Advanced Safety Features Integrated DC switch No trackers, simplifying maintenance and reducing potential points of failure Technical Specifications Rated Power: 9,000 W Phases: 3 Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max DC Power: 9,450 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,000 W Max DC Current: 12 A Max DC Inputs: 2 Connector Type: MC4 Euro Efficiency: 97.4 % MPPT Quantity: 0 Transformer: None Weight: 16.4 kg Warranty: 12 years Why Choose the SolarEdge 9000? With high efficiency, robust UK compliance, and seamless SetAPP commissioning, this inverter is an ideal choice for installers seeking reliable, high-performing 3-phase solar solutions.

Fox 10.5kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.5 Storage Systems - Hybrid Inverter Fox 10.5kW Datasheet Fox 10.5kW Manual Fox 10.5kW Warranty Fox 10.5kW G100 Certificate   FoxESS K Series 10kW Single Phase Hybrid Inverter Harness the full potential of your solar energy system with the FoxESS K Series 10kW single-phase hybrid inverter. Designed for efficiency and flexibility, this IP65-rated inverter is ideal for indoor or outdoor installations and works seamlessly with high-voltage batteries for maximum round-trip efficiency. Key Features Stylish and Robust Design: IP65-rated enclosure suitable for outdoor environments. High Efficiency: High-voltage battery compatibility ensures up to 97.4% round-trip efficiency. Remote Monitoring & Control: Access and control your system easily via FoxESS Cloud. Easy Installation: Lightweight design at 29kg, saving time and effort on-site. Battery Compatibility: Works with Cube & EP batteries. Zero Export Control: CT clamp included for safe and compliant energy management. Technical Specifications Specification Value Weight 29 kg Rated Power 10,500 W Minimum PPT Voltage 80 V Maximum PPT Voltage 500 V DC Startup Voltage 75 V DC Shutdown Voltage 601 V Maximum Input Voltage 600 V Maximum DC Power 15,000 W Maximum AC Power (5 min) 10,000 W Surge AC Power (1 sec) 10,500 W Maximum DC Current 64 A Max DC Inputs 4 DC Fuses 0 Connector MC4 Included Connectors 8 Euro Efficiency 97.4 % Transformer None MPPT Quantity 4 Integrated DC Switch Yes Why Choose the FoxESS K Series? The FoxESS K Series combines sleek design, reliable performance, and advanced technology to give you complete control over your solar energy. Its high-efficiency performance and flexible battery compatibility make it an excellent choice for homeowners looking to optimise their solar storage and energy management. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

SolarEdge 17kw Three Phase on grid 17,000W solar Inverter   2: SE-17000-APP Inverters - Main Units #4: SE17K-RW0T0BNN4 SolarEdge SE17K – 17kW Three-Phase Inverter (with SetApp) The SolarEdge SE17K three-phase inverter is a high-performance, reliable solution for commercial and large-scale residential solar PV installations. Designed to work exclusively with SolarEdge Power Optimisers, it provides superior energy harvesting, system monitoring, and long-term performance. With SetApp connectivity (mobile configuration via smartphone) and fixed-voltage technology, the SE17K ensures the inverter always operates at its optimal input voltage, regardless of string length or environmental conditions. Key Features ✅ 17kW three-phase inverter (model: SE17K-RW000BNN4) ✅ SetApp functionality – configuration via mobile app (no display screen) ✅ Requires SolarEdge Power Optimisers (no internal MPPT trackers) ✅ Fixed-voltage technology for maximum efficiency ✅ Digital control and one-stage power conversion ✅ Industry-leading reliability and monitoring options Technical Specifications General Rated Power: 17,000 W Phases: 3 (three-phase) Model: SE17K-RW000BNN4 Monitoring: SetApp (no display) Performance Works exclusively with SolarEdge Power Optimisers Designed for superior solar power harvesting Built for large residential and commercial installations Why Choose the SolarEdge SE17K Inverter? Ensures maximum solar production with module-level optimisation Provides remote monitoring and advanced analytics through SolarEdge platform Delivers long-term durability and efficiency Backed by SolarEdge’s reputation for innovation and reliability ✅ The SolarEdge SE17K Three-Phase Inverter is the ideal choice for scalable solar PV systems, delivering high efficiency, reliable performance, and full optimisation with SolarEdge Power Optimisers.

Solis Single Phase Low Voltage 8kW Energy Storage Hybrid Inverter   #2: SOL-S6-EH1P8K-L-PLUS Solis 8kW Data Sheet Solis 8kW User Manual Solis 8kW Warranty Solis Product Compatibility Solis 8kW Single Phase Low Voltage Energy Storage Hybrid Inverter   Overview The Solis 8kW Single Phase Low Voltage Energy Storage Hybrid Inverter PLUS is designed for high-demand residential and commercial solar applications. With advanced energy management features, it delivers reliable backup power, peak shaving, and flexible connection options for lead-acid or lithium batteries. Ideal for modern grid-tied or off-grid systems, this inverter maximises self-consumption and protects your investment. Key Features Built-in Backup Port with automatic UPS switching AI Optimised cloud-based, automated energy management assistant Supports up to 190A max charge/discharge current 200% DC oversizing capability for flexible solar array configuration Customisable charge/discharge times with 6 programmable settings 10-second 200% surge power backup for critical loads Generator compatibility with automatic On/Off control Flexible 1-phase or 3-phase parallel connection, supporting up to 48kW AC coupling to upgrade existing grid-connected systems Peak shaving control in both self-use and generator mode Compatible with lead-acid and lithium batteries with multiple protection features Technical Specifications Supplier Part No: S6-EH1P8K-L-PLUS Weight: 22.2 kg Rated Power: 8,000 W Max DC Power: 16,000 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,001 W Max DC Current: 64 A DC Inputs: 8, with MC4 connectors included Min PPT Voltage: 90 V | Max PPT Voltage: 435 V DC Startup/Shutdown Voltage: 90 V Max Input Voltage: 500 V MPPT Quantity: 8 Transformer: None Euro Efficiency: 96.5% Warranty: 5 years