IP65 Solar Inverters

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2 SolaX 3.7kW Data Sheet SolaX 3.7kW Manual SolaX 3.7kW Warranty SolaX 3.7kW G98 Certificate For a full list of SolaX products click here. SolaX G4-V2 HV Single Phase Hybrid Inverter & Charge Controller The SolaX G4-V2 represents the fourth generation of single-phase hybrid inverters and AC charge controllers, combining high efficiency, fast charging, and robust performance. Ideal for residential solar systems, this inverter maximises solar energy utilisation while providing smart battery management and enhanced reliability in harsh environments. Key Features Supports up to 150% PV Oversizing: Maximise solar input for consistent energy production. Fast Charging Speeds: Charge the Triple Power battery in almost one hour. High Reliability: Tested under extreme temperatures, HALT tested, salt spray tested, and full-load aging tested. Quick Installation: Reduced installation time with pre-configured connections and SUNCLIX connectors. Element Protection: Operates efficiently in temperatures as low as -30°C. Wi-Fi Included: Built-in Wi-Fi for remote monitoring and system control – no additional purchase required. Battery & PV Management: Integrated charge controller optimises solar and battery usage for maximum efficiency. Specifications Rated Power: 3,680 W Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Current: 28 A DC Inputs: 2 Connector Type: SUNCLIX (2 included) MPPT Quantity: 2 Euro Efficiency: 97% Integrated DC Switch: No Weight: 24 kg Warranty: 10 years

SolaX X1-SMART-G2 8.0kW 1ph 3MPPT Inverter (incl. WiFi and DC) #3: 6684 SolaX X1-SMART-G2 8.0.kW Data Sheet SolaX X1 SMART-G2. 8.0kW User Manual Part 1 SolaX X1-SMART-G2 8.0kW User Manual Part 2 SolaX X1-SMART-G2 8.0kW Installation Manual Part I SolaX X1-SMART-G2 8.0kW Installation Manual Part 2 For a full list of SolaX products click here. SolaX Single-Phase 2nd Generation Inverter The SolaX single-phase inverter is designed for maximum energy harvesting with a wide MPPT voltage range. Its advanced DSP control technology ensures a high efficiency of up to 97.4%, making it an ideal choice for residential solar systems. Features High efficiency performance Low start-up voltage for early energy capture Compact and lightweight design Remote monitoring capabilities Compatible with WiFi V2.0 IP66 rated for robust outdoor installation 5-year warranty Specifications Weight: 19.5 kg Maximum Efficiency: 98.2% Maximum AC Current: 34.8 A Maximum AC Power: 8,000 W DC Startup Voltage: 50 V Max DC Power: 16,000 W Max Voc Voltage: 560 V Start-up Current: 50 A MPPT Voltage Range: 100 – 560 V Number of MPPTs: 3 Dimensions (H x W x D): 513 x 370 x 170 mm  

Victron MultiPlus-II 24/3000/70-32 230V GX (2400W) Victron MultiPlus Data Sheet Victron MultiPlus Manual   To view our full range of Victron products visit our main Victron page here Victron MultiPlus-II GX inverter/charger with GX inside and on board display Overview The Victron MultiPlus-II GX is an advanced inverter/charger with built-in device networking, designed to manage grid-connected, off-grid, and remote power installations. It communicates seamlessly with solar chargers, batteries, and other devices to provide reliable and efficient power management. Key Features Smart Device Connectivity Communicates with solar chargers, batteries, and energy management devices Remote monitoring and control via smartphone, tablet, or computer Easy configuration for three-phase or single-phase systems Parallel Operation Capability Combine multiple units for increased power output Supports higher battery charge rates for faster energy storage Flexible installation for residential, commercial, or off-grid setups Advanced Power Management Uninterrupted power supply (UPS) for sensitive electronics Set load limits to optimise grid usage Supplement limited grid power using battery storage for energy independence Remote Monitoring and Control Full access to system status and settings via the Victron app or portal Monitor battery levels, inverter performance, and solar input remotely Adjust system operation and troubleshoot from anywhere Benefits Reliable energy supply for homes, businesses, and remote locations Maximise self-consumption of solar energy Protect sensitive equipment with UPS functionality Flexible, scalable, and easy to integrate with solar and battery systems

Solis 10 kw 3 Phase on grid Solar Inverter #2: SOL-S5-GR3P-10K-DC #4: S5-GR3P10K-DC  Solis 10kw Data Sheet Solis 10kw Manual Solis 10kw Warranty Solis 10kw G100 Certification Extended 5yr warranty available here Solis Series 5 GR3P – 10kW Three Phase Grid-Tied Inverter Designed for high-performance residential and commercial solar PV systems, the Solis Series 5 GR3P delivers reliable, efficient, and safe energy conversion with advanced protection features. Key Features: High Efficiency: Max. 98.5% conversion efficiency for optimal energy yield Three Phase Power: Ideal for large-scale or commercial solar installations Wide Voltage Range: Ultra-low start-up voltage of 180V and maximum PV input voltage of 1,100V DC & AC Protection: Integrated Type-II surge protection, DC reverse-polarity protection, and AFCI (arc-fault) protection Smart Connectivity: Register on SolisCloud for remote monitoring, upgrade, and control IP66 Rated: Dust and water-resistant for long-lasting outdoor installation Integrated DC Switch: Simplifies installation and maintenance Technical Specifications: Rated Power: 10,000 W Max AC Output Power (5 min): 11,000 W Max PV DC Power: 15,000 W Max DC Current: 32 A Max DC Inputs: 2 MPPT Quantity: 2 Connectors: 4 × MC4 Transformer: None Euro Efficiency: 97.9% Warranty: 5 years Physical Specs: Weight: 17.8 kg Dimensions: Standard for Series 5 GR3P The Solis Series 5 GR3P is perfect for installers and homeowners seeking a robust, high-efficiency three-phase inverter with integrated protection, remote monitoring, and maximum power output.

Solis 12kw 3 Phase on grid Solar Inverter S5 Dual MPPT DC #2:SOL-S5-GR3P-12K-DC #4: S5-GR3P12K-DC Solis 12kw Inverter Data Sheet Solis 12kw Inverter User Manual Solis 12kw Warranty Extended 5yr warranty available here Series 5 GR3P Three Phase Grid-Tied Inverter – 12,000W Looking for a reliable and high-performance solar inverter for your three-phase system? The Series 5 GR3P 12kW Grid-Tied Inverter delivers exceptional efficiency, advanced safety features, and long-term durability, making it ideal for residential and commercial solar installations in the UK. Key Features & Benefits Max Efficiency of 98.6% – Achieve superior energy conversion and maximise your solar output. Wide Voltage Range – Ultra-low start-up voltage of 180V and max PV input voltage of 1100V for optimal flexibility. Robust Protection – Type-II surge protection for both DC and AC, plus DC reverse-polarity protection. Integrated AFCI – Advanced DC arc-fault circuit protection for enhanced system safety. IP66 Rated – Built to withstand harsh outdoor conditions. Remote Monitoring – Easily register on SolisCloud for remote upgrades and real-time control. Technical Specifications Rated Power: 12,000W Maximum AC Output Power: 13.2kW Max PV DC Power: 18kW MPPT Voltage Range: 180V – 1,000V Startup Voltage: 180V Max Input Voltage: 1,100V PV String Inputs: 4 (16A each) Efficiency: 98% Euro efficiency Integrated DC Switch: Yes Warranty: 5 years (standard) Why Choose the Series 5 GR3P Inverter? With three-phase capability, high conversion efficiency, and advanced safety features, this inverter is designed to deliver reliable power performance for large-scale solar systems. Its rugged IP66 enclosure ensures durability, while the SolisCloud integration keeps you connected and in control from anywhere.

SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) #3: 4443 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty SolaX X1 G4 Hybrid 7.5Kw (inc. WiFi dongle) Introducing the latest SolaX Hybrid, the 4th generation, an advanced evolution of its 3rd-generation predecessor. This model not only retains all the essential features that made the previous version popular but also incorporates significant enhancements for an improved experience. The SolaX Hybrid stands out as a dual-function unit, efficiently combining the roles of a solar PV inverter and a battery storage controller. This innovative integration allows for the storage of excess solar energy in batteries, making it available for use when needed. It's crucial to note that the sizing of this hybrid system is akin to that of a standard inverter. For those considering an upgrade, the SolaX Hybrid is designed to seamlessly replace any existing inverter in a retrofit scenario, simplifying the transition to this more advanced system. Key Features: In-built EPS changeover switch Supports up to 150% oversizing Can work at full capacity down to -35C 30A Charge/discharge capability On-grid and off-grid use Includes WiFi Dongl AC attributes Max power: 7500W Max current: 40A Number of phases: 1 DC attributes Max power: 10000W Max Isc current: 16A Max voltage: 550VStart up voltage: 90V System Max efficiency: 97.6% IP rating: IP65 Weight: 23kg Dimensions: 482*417*181mm For a full list of SolaX products click here.

SolaX X1 G4 Hybrid Inverter 6kW #1:  X1-HYBRID-G4-6.0  #3: 4442 Solax X1 G4 Data Sheet Solax X1 G4 User Manual Solax X1 G4 Warranty Solax X1 G4 G99   SolaX X1 G4 Hybrid 6.0D – 4th Generation Hybrid Solar Inverter The SolaX X1 G4 Hybrid 6.0D represents the latest 4th generation of SolaX hybrid inverters, offering improved performance, enhanced reliability, and flexible energy storage options. Perfect for UK households and small commercial properties, this hybrid inverter allows you to store surplus solar energy in batteries for later use while retaining all the core features of previous generations. Key Features Intelligent Hybrid Functionality Stores excess solar energy in batteries for on-demand use. Functions as both an inverter and battery storage controller – ideal for retrofits or new installations. Supports up to 150% PV oversizing, ensuring maximum energy harvest. Built-in Safety & Reliability EPS (Emergency Power Supply) changeover switch included for backup during outages. Operates at full capacity in extreme temperatures down to -35°C. IP65-rated for outdoor installations, protecting against dust and water ingress. High Performance & Efficiency 30A charge/discharge capability for fast battery management. On-grid and off-grid operation for flexible system design. Max efficiency of 97.6%, ensuring optimal energy conversion. Connectivity & Monitoring Includes WiFi dongle for real-time system monitoring and remote management. Technical Specifications AC Attributes Max Power: 6,000 W Max Current: 28.6 A Number of Phases: 1 DC Attributes Max Power: 9,000 W Max Isc Current: 16 A Max Voltage: 600 V Start-up Voltage: 90 V System & Physical Max Efficiency: 97.6% IP Rating: IP65 Weight: 22 kg Dimensions: 482 × 417 × 181 mm

Fox H1 3.0kW Hybrid Inverter G2 #2: FE-H1-3.0-G2 Storage Systems - Hybrid Inverter Fox H1 3.0kW Datasheet Fox H1 3.0kW Manual Fox H1 3.0kW Installer Guide Fox H1 3.0kW G100 Certification Fox Battery Sizing Guide Fox H1 3kW Hybrid Inverter – High Efficiency, Easy Expansion The Fox H1 3kW Hybrid Inverter is a compact, high-performance solution designed for residential and small commercial solar systems. With dual MPPT tracking and a high round-trip efficiency of 97%, it ensures maximum energy harvest from your solar array. Its modular and flexible design allows for easy expansion with compatible FoxESS batteries, making it a future-proof energy storage solution. Key Features Easy Installation: Plug-and-play design saves time on site High Voltage System: Supports efficient energy storage and discharge IP65 Rated: Suitable for outdoor installations Remote Monitoring: Monitor your system via WiFi or the FoxESS portal Dual MPPT: Optimises solar production for maximum efficiency High Round-Trip Efficiency: 97% for effective energy use Expandable Battery Capacity: Compatible with multiple FoxESS batteries   Included in the Package CT Clamps WiFi Stick Additional Requirements A second CT if there is another generator set (PV, wind, etc.) A meter between the inverter and incoming power connection point if the distance exceeds 30m Technical Specifications Weight: 22 kg Rated Power: 3,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 Minutes): 4,500 W Max AC Power (5 Minutes): 3,000 W Surge AC Power (1 Second): 3,300 W Max DC Current: 32 A Max DC Inputs: 2 DC Fuses: None Connector Type: MC4 (4 included) Euro Efficiency: 95.7 % Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years ✅ **The Fox H1 3kW Hybrid Inverter is ideal for homeowners seeking a reliable, efficient, and expandable solar energy solution compatible with a wide range of FoxESS batteries. Remember to register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox H1 3.7kW Hybrid Inverter 1PH G2 #2: FE-H1-3.7-G2 Storage Systems - Hybrid Inverter Fox H1 3.7kW Datasheet Fox H1 3.7kW Manual Fox H1 3.7kW Installer Guide Fox H1 3.7kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   3.68kW Fox Single Phase Hybrid/AC Inverter – Expandable Storage, Dual MPPT This 3.68kW hybrid/AC inverter is a compact, high-performance solution for residential solar energy systems. With dual MPPT tracking and an impressive 97% round-trip efficiency, it ensures maximum solar energy production and system reliability. Designed for scalability, it supports up to seven Cube batteries in series. Compatible with all Fox Cube and EP5/6/EP11/12 batteries, it’s the perfect choice for homes seeking reliable energy independence. Key Features 🔧 Easy Installation – compact and installer-friendly design ⚡ High Voltage & Dual MPPT – ensures optimal solar yield 💧 IP65 Protection – suitable for indoor or outdoor installation 📡 Remote Monitoring – manage your system anytime, anywhere 🔄 Scalable Storage – expand with up to 7 batteries (33.24kWh max.) 🌍 Compatible with Fox Cube & EP Series batteries 🎯 High Efficiency – 97% round-trip efficiency What’s Included ✅ CT Clamps ✅ WiFi Stick     Additional Requirements 📏 A second CT if another generator set (PV, wind, etc.) is present ⚡ A meter between inverter and incoming power connection point if distance >30m Technical Specifications Rated Power: 3,680 W Weight: 22 kg Min. PPT Voltage: 80 V Max. PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 600 V Max. Input Voltage: 600 V Max. DC Power (5 mins): 5,500 W Max. AC Power (5 mins): 3,680 W Surge AC Power (1 sec): 4,400 W Max. DC Current: 32 A Max. DC Inputs: 2 DC Fuses: No Connector Type: MC4 Included Connectors: 4 Euro Efficiency: 95.7% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Compatibility: FoxESS inverters compatible with Tigo optimisers Fox ESS inverters are not compatible with SolarEdge or Huawei optimizers ✅ With its high-voltage design, dual MPPT efficiency, and scalability up to 33.24kWh storage, this hybrid/AC inverter is ideal for households looking to maximise solar self-consumption and future-proof their energy systems. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

Fox 10kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-10.0 Inverters - Main Units Fox T Series 10.0kW Datasheet Fox T Series 10.0kW Install Guide Fox T Series 10.0kW Warranty Fox T Series 10.0kW G98 Certificate FoxESS T Series 3-Phase Inverter – 10.0kW Product Overview The FoxESS T Series inverter is a versatile solution for 3-phase residential homes and small commercial installations. Designed for high efficiency and reliability, it integrates seamlessly with solar PV and battery systems, offering a robust IP65-rated enclosure for indoor or outdoor use. Key Features Easy Installation – Plug-and-play design with flexible setup for rapid deployment. IP65 Protection – Dustproof and waterproof for long-lasting outdoor performance. Remote Monitoring – Track system performance via the FoxESS Cloud portal. High Efficiency – Round-trip efficiency of 98.6% ensures maximum energy utilisation. Specifications Weight: 17 kg Rated Power: 10,000 W DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Min/Max MPPT Voltage: 140 – 1,100 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 11,000 W Max DC Current: 14 A Number of MPPTs: 2 DC Inputs: 2 DC Fuses: 2 Connector Type: MC4 (2 included) Transformer: None Integrated DC Switch: Yes Euro Efficiency: 97.8 % Warranty: 5 years This inverter is perfect for homeowners and small businesses looking for a reliable, efficient, and remotely monitored 3-phase solar solution. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox H1 5.0kW Hybrid Inverter G2 #3: 5984#2: FE-H1-5.0-G2 Storage Systems - Hybrid Inverter Fox H1 5.0kW Datasheet Fox H1 5.0kW Manual Fox H1 5.0kW Installer Guide Fox H1 5.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Single Phase Hybrid/AC Inverter – 5kW with Dual MPPT This single phase 5kW Hybrid/AC Inverter is designed for efficient solar energy storage and flexible system expansion. With dual MPPT technology and up to 97% round-trip efficiency, it ensures optimal solar production and seamless integration with compatible batteries. Perfect for home and small commercial installations, this inverter allows connection of up to seven batteries in series with a maximum storage capacity of 33.24kWh. Key Features ⚡ Easy Installation – streamlined setup process 🔋 High Voltage Compatibility – supports Cube & EP batteries 🌦️ IP65 Rated – suitable for indoor or outdoor installations 📡 Remote Monitoring – track performance anytime, anywhere 🌞 Dual MPPT Tracking – maximise solar energy harvest 🔄 High Efficiency – 97% round-trip efficiency for minimal energy loss What’s Included CT Clamps WiFi Stick Additional Requirements An extra CT clamp is required if connecting to another generator (PV, wind, etc.) A meter between the inverter and the incoming power connection point is required if distance exceeds 30m Technical Specifications Weight: 22 kg Rated Power: 5,000 W Min PPT Voltage: 80 V Max PPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 mins): 7,500 W Max AC Power (5 mins): 5,000 W Surge AC Power (1 sec): 5,500 W Max DC Current: 32 A Max DC Inputs: 2 DC Fuses: None Connectors: MC4 (x4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years 🔧 Ideal for system expansion – compatible with both new and existing solar setups.🌍 UK-compliant and built for long-term performance.   Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.Please Note: When installing batteries side-by-side and not stacked one on top of the other, we recommend using HV2600 1M DC Extension Cable  

Duracell Energy Dura-i G3 3.6kW Hybrid Inverter  #5: Duracell Energy Dura-i 3.6kW PD-DH1P-3.6K-G3  Duracell G3 Inverter Data Sheet Duracell Inverter Manual Duracell Dura-i G3 3.6kW Single Phase Hybrid Inverter The Duracell Dura-i G3 3.6kW Hybrid Inverter is a compact, high-performance single-phase inverter designed for residential solar PV and battery storage systems. Compatible with the Duracell Dura battery range, it combines solar generation, battery storage and intelligent energy management within one integrated solution. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability helps maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing additional flexibility for larger or expandable energy storage installations. Key Features 3.6kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 75A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 3.6kW Rated AC Output Power 3.6kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 75A Maximum Discharge Current 75A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day, helping homeowners increase solar self-consumption and reduce reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 3.6kW model provides considerable flexibility when designing an oversized solar array, subject to the electrical limits of each MPPT and the overall system design. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes it suitable for customers looking for both solar and battery storage alongside improved household energy resilience. Built-In Smart Meter Unlike systems requiring a separate external energy meter, the Dura-i G3 features an integrated smart meter, helping simplify system design and installation while providing the inverter with the information required to intelligently manage household energy flows. Expandable System For installations requiring greater power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, making it suitable for both standard residential installations and larger energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

Duracell Energy Dura-i G3 5kW Hybrid Inverter   #5: PD−DH1P−5.0K−G3  Duracell G3 Inverter Data Sheet Duracell Inverter Manual   Duracell Dura-i G3 5kW Single Phase Hybrid Inverter The Duracell Dura-i G3 5kW Hybrid Inverter is a powerful and versatile single-phase hybrid inverter designed for residential solar PV and battery storage installations. Compatible with the Duracell Dura5 battery range, it combines solar generation, battery storage and intelligent energy management within one integrated system. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability can maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing a flexible and scalable solution for larger energy requirements. Key Features 5kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 100A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 5kW Rated AC Output Power 5kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 100A Maximum Discharge Current 100A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day or overnight, helping homeowners increase solar self-consumption and reduce reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 5kW model provides excellent flexibility when designing residential solar arrays, subject to the voltage, current and power limitations of each MPPT. High-Power Battery Charging The 5kW Dura-i G3 provides up to 100A battery charge and discharge current, enabling high battery power when paired with a suitably sized and configured Duracell Dura5 battery system. Actual charge and discharge power will depend on the battery configuration, battery voltage, state of charge, temperature and other system operating limits. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes it suitable for homeowners looking to combine solar PV and battery storage with increased protection against power interruptions. Built-In Smart Meter The Dura-i G3 incorporates a built-in smart meter, helping simplify installation by removing the requirement for a separate remote energy meter. The integrated monitoring allows the inverter to intelligently manage energy flows between the property, solar array, battery and electricity grid. Expandable System For installations requiring additional power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, providing flexibility for larger residential and light-commercial energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

Sunsynk ECCO 3.6Kw Hybrid Inverter solar & wind Inverter #2: SUN-3.6-ECCO Storage Systems - Hybrid Inverter Sunsynk 3.6Kw Data Sheet Sunsynk 3.6Kw Installation Manual Sunsynk 3.6Kw Warranty Sunsynk 3.6Kw G99 Certificate To view our full range of Sunsynk products visit our main Sunsynk page here SunSynk 3.6kW AC ECCO 7kWp Hybrid Inverter Take control of your energy with the SunSynk 3.6kW AC ECCO Hybrid Inverter, a next-generation super hybrid system designed for efficiency, flexibility, and smart energy management. Compatible with Lithium-ion and Lead Acid batteries, this inverter integrates seamlessly with Octopus Agile, Flux, and Go for real-time energy optimisation. Key Features High Efficiency Hybrid Inverter: Rated AC output of 3.68kW with a 7kW MPPT, ideal for generating energy even during winter months Dual MPPT Design: Maximises energy harvest from solar arrays Battery Compatibility: Supports up to 50kWh of connected Lithium-ion or Lead Acid batteries Advanced Grid Integration: Fully programmable power export with automatic switching between Grid-Tied and Off-Grid mode Scalable System: Up to 16 units can be paralleled with the same firmware for larger installations IP65 Rated & Anti-Islanding Protection: Ensures durability and safety in all conditions Euro Efficiency: 99.9% for maximum energy utilisation Technical Specifications Rated Power: 3,600 W Min MPPT Voltage: 125 V | Max MPPT Voltage: 500 V DC Startup Voltage: 150 V | DC Shutdown Voltage: 125 V Max Input Voltage: 500 V | Max DC Power: 7,000 W Max AC Power (5 Minutes): 3,960 W | Surge AC Power (1 Second): 5,400 W Max DC Current: 22 A | Max DC Inputs: 2 Connector: MC4 | Integrated DC Switch: Yes MPPT Quantity: 2 | Transformer: None Warranty: 5 years Sunsynk App & Data Logger Remote Control: Change all inverter settings from anywhere in the world Real-Time Monitoring: Monitor energy production, consumption, and battery status instantly Push Notifications: Receive alerts for power cuts, generator use, or battery activity Live Stats & Reporting: Access detailed energy statistics, generate custom reports, and track savings Octopus Agile & Flux Integration: Charge batteries at the cheapest rates and discharge when electricity prices are high, optimising savings Start using the Sunsynk Logger app via the Apple App Store or Google Play Store. Why Choose the SunSynk 3.6kW ECCO Hybrid Inverter? Optimises energy production for both self-consumption and export Advanced safety features and programmable settings Supports smart grid integration for cost savings Scalable and flexible for residential or commercial installations

Victron MultiPlus-II 48/5000/70-50 230V GX #17: Victron MultiPlus-II 48/5000/70-50 230V GX (48V - 70A Charger - 50A) Victron 230V GX Data Sheet Victron 230V GX Manual  To view our full range of Victron products visit our main Victron page here Victron MultiPlus-II All-in-One Solar Power Solution Product Overview The Victron MultiPlus-II is the latest generation all-in-one solar power solution from Victron Energy, Netherlands. Combining the functions of the MultiPlus and MultiGrid, this system integrates a true sine wave inverter, high-speed AC transfer switch, and sophisticated battery charger into a single compact enclosure. It delivers reliable, high-performance energy management for both off-grid and grid-connected PV systems. Key Features Energy Storage System (ESS) Functionality Includes all functions of the MultiPlus range with built-in anti-islanding Wide global approvals for safe and compliant installations Optimises self-consumption with external current sensing (up to 32A) PowerControl & PowerAssist Ability to set maximum generator or grid current Extra power is automatically used for battery charging Limits peak power requirements to prevent overload Monitoring & Control On-site configuration via MK3-USB interface Remote monitoring and configuration using GX device and VRM portal Regular firmware updates add new features based on user community requests Reliability & Performance High-quality Victron engineering with over 40 years of renewable energy expertise Advanced protection systems to ensure safe operation Simple installation with fully illustrated colour wiring and mounting diagrams Technical Specifications DC Input: 38–66V (48V nominal) Continuous Output Power: 5000VA (4000W) Peak Power: 9000W Maximum Efficiency: 96% Zero-Load Power Consumption: 2–18W AC Input Voltage: 187–265VAC, 45–65Hz Max Charge Current: 70A (48V) AC Transfer Relay: 50A Dimensions: 565 x 323 x 148mm Weight: 29kg Warranty: 5 years Why Choose Victron? Global leader in off-grid and battery storage systems Trusted for high-quality, reliable products and exceptional support Ideal for residential, commercial, and community renewable energy projects

Solis inverter 20kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-20K-DC #4: S5-GR3P20K-DC Solis 20kW Data Sheet Solis 20kW Manual Solis Inverter 20kW Warranty Solis 20kW G100 Certification   Extended 5yr warranty available here Solis Series 5 GR3P Three Phase Inverter – High Power & Efficient Solar Conversion The Solis Series 5 GR3P Three Phase Grid-Tied Inverter is a robust and high-performance solution for large-scale residential and commercial solar installations. Delivering up to 20kW of rated power, this inverter combines high efficiency, advanced safety features, and reliable performance for maximum energy yield. With a wide voltage range and IP66 rating, it is designed to operate in harsh conditions while ensuring long-term reliability. Key Features & Benefits ✔ Exceptional Efficiency & Performance Maximum efficiency of 98.7% for optimal energy production. Ultra-low start-up voltage of 180V and maximum PV input voltage of 1,100V. Maximum AC output power: 22kW. Supports Max PV DC Power: 30kW. ✔ Advanced Safety & Protection Type-II over-voltage surge protection for both DC and AC. Integrated AFCI (DC arc-fault circuit protection). DC reverse-polarity protection and integrated DC switch for safe operation. ✔ Flexible & Reliable Installation Four 16A PV string inputs with MC4 connectors included. IP66-rated enclosure ensures dust and water protection. NRS-097-2-1 certified for UK compliance. ✔ Smart Monitoring Register on SolisCloud for remote upgrades, monitoring, and control. Technical Specifications Rated Power: 20,000 W Phases: 3 Min MPPT Voltage: 180 V Max MPPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 30,000 W Max AC Power (5 min): 22,000 W Surge AC Power (1 sec): 22,000 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98.1% Transformer: None MPPT Quantity: 2 Weight: 22.94 kg Warranty: 5 years Why Choose Solis Series 5 GR3P? Delivers high-efficiency energy conversion for large solar systems. Advanced safety features like AFCI and surge protection ensure reliable operation. IP66-rated and NRS-certified for installation in harsh UK conditions. Compatible with SolisCloud for remote monitoring and upgrades. ⚡ Maximise your solar energy output with the Solis Series 5 GR3P Three Phase Inverter – a powerful, efficient, and reliable choice for residential and commercial installations.

Fox H1 6.0kW Hybrid Inverter G2   #2: FE-H1-6.0-G2 Storage Systems - Hybrid Inverter #3: 5985 Fox H1 6.0kW Datasheet Fox H1 6.0kW Manual Fox H1 6.0kW Installer Guide Fox H1 6.0kW G100 Certification Fox Battery Sizing Guide Fox H1 Hybrid Warranty   Fox Hybrid Single-Phase AC Inverter – Expandable Solar Energy Solution The Fox Hybrid Single-Phase AC Inverter combines high efficiency, flexible expansion, and smart monitoring to optimise your solar energy system. Compatible with Cube & EP5/11 batteries, this inverter is perfect for residential and small commercial installations. Key Features Easy Installation Quick and straightforward setup for hassle-free integration. High Voltage & Dual MPPT Dual MPPT design ensures maximum solar energy production. High round-trip efficiency of 97% maximises energy savings. Remote Monitoring Monitor your system in real-time via Wi-Fi for performance tracking and updates. Durable & Weatherproof IP65-rated for indoor and outdoor installation. What’s Included CT Clamps Wi-Fi Stick Additional Requirements Second CT clamp for additional generator sets (PV, wind, or others). Energy meter between inverter and incoming power connection if the distance exceeds 30m. Technical Specifications Weight: 23 kg Rated Power: 6,000 W Minimum MPPT Voltage: 80 V Maximum MPPT Voltage: 550 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Maximum Input Voltage: 600 V Max DC Power (5 minutes): 9,000 W Max AC Power (5 minutes): 6,000 W Surge AC Power (1 second): 6,600 W Maximum DC Current: 32 A Maximum DC Inputs: 2 Connector Type: MC4 (4 included) Euro Efficiency: 97% Transformer: None MPPT Quantity: 2 Integrated DC Switch: No Warranty: 5 years Why Choose the Fox Hybrid Inverter? The Fox Hybrid Single-Phase AC Inverter delivers reliable, efficient, and scalable solar power management. Its high voltage design, dual MPPT, and remote monitoring capabilities make it an ideal choice for homeowners and businesses looking to expand their solar energy systems while maximising efficiency and savings. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Duracell Home Battery Dura-i G3 6kW Hybrid Inverter   #5: Duracell Energy Dura-i 6kW Hybrid Inverter PD-DH1P-6-G1  Duracell G3 Inverter Data Sheet Duracell Inverter Manual   Duracell Dura-i G3 6kW Single Phase Hybrid Inverter The Duracell Dura-i G3 6kW Hybrid Inverter is a powerful single-phase hybrid inverter designed for residential solar PV and battery storage installations. Compatible with the Duracell Dura battery range, it combines solar generation, battery storage and intelligent energy management within one integrated system. With support for up to 10kWp of solar PV, dual MPPT trackers and a maximum efficiency of 97.3%, the Dura-i G3 is designed to maximise solar generation and increase household self-consumption. A built-in smart meter simplifies installation by removing the need for a separate remote energy meter, while backup power capability can maintain essential loads during a grid outage. The modular design also allows up to 9 units to be connected in parallel, providing a flexible and scalable solution for larger residential energy requirements. Key Features 6kW single-phase hybrid inverter Compatible with Duracell Dura5 batteries Supports up to 10kWp solar PV Dual MPPT design for improved solar generation Built-in smart meter – no separate remote energy meter required Battery charge and discharge current up to 120A Backup power capability Hybrid operation with AC connectivity Up to 9 units can be connected in parallel High maximum efficiency of 97.3% IP65 rated for indoor or outdoor installation Compact wall-mounted design Wide operating temperature range from -25°C to +60°C Technical Specifications Specification Dura-i G3 6kW Rated AC Output Power 6kW Phase Single Phase Maximum PV Input Power 10kW MPPT Trackers 2 Strings per MPPT 1 / 1 Maximum PV Input Voltage 550V DC MPPT Voltage Range 70–540V DC Maximum Power per MPPT 5,000W Battery Type Lithium-ion Battery Voltage Range 40–65V DC Maximum Charge Current 120A Maximum Discharge Current 120A Maximum Efficiency 97.3% Ingress Protection IP65 Operating Temperature -25°C to +60°C Dimensions (W × H × D) 377 × 452 × 206mm Weight 20kg Solar & Battery Storage The Dura-i G3 intelligently manages energy between the solar PV array, Duracell battery, household loads and electricity grid. Excess solar generation can be stored in the battery for use later in the day or overnight, helping homeowners increase solar self-consumption and reduce their reliance on imported grid electricity. With a maximum PV input capacity of 10kW, the 6kW model provides considerable flexibility when designing residential solar arrays, subject to the voltage, current and power limitations of the individual MPPTs. High-Power Battery Charging The 6kW Dura-i G3 provides up to 120A battery charge and discharge current, allowing considerably higher battery power than the 3.6kW model when paired with a suitably sized and configured Duracell battery system. Actual charge and discharge power will depend on the battery configuration, battery state of charge, temperature and other system operating limits. Backup Power The Dura-i G3 provides backup power functionality, allowing appropriately configured circuits to continue operating if the grid supply fails. This makes the system particularly suitable for homeowners looking to combine solar and battery storage with improved protection against power interruptions. Built-In Smart Meter The Dura-i G3 incorporates a built-in smart meter, helping simplify installation by removing the requirement for a separate remote energy meter. The integrated monitoring allows the inverter to intelligently manage energy flows between the property, solar array, battery and electricity grid. Expandable System For installations requiring additional power capacity, the Dura-i G3 provides a scalable platform with support for up to 9 units connected in parallel, providing additional flexibility for larger residential and light-commercial energy requirements. About Duracell Energy Duracell Energy combines the globally recognised Duracell brand with modern renewable energy technology to provide reliable solar, battery storage and intelligent energy management solutions. Its residential energy products are designed to help homeowners maximise solar self-consumption, improve energy efficiency, reduce dependence on the electricity grid and make better use of stored renewable energy.

Solis 15kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-15K-DC  Solis 15kW S5 3 Phase Data Sheet Solis 15kW S5 3 Phase Manual Solis 15kW S5 3 Phase Warranty Solis 15kW S5 3 Phase G100 Certificate Extended 5yr warranty available here 15kW Three Phase Grid-Tied Inverter The 15kW three-phase grid-tied inverter is designed for commercial and large-scale residential solar systems, delivering high efficiency and robust protection features. With its IP66-rated casing and dual MPPT inputs, it ensures optimal energy conversion and system reliability. Key Features ⚡ High Efficiency: Max efficiency of 98.6% 🌐 Three-Phase Design: Suitable for large-scale solar installations 🛡️ Comprehensive Protection: Type-II surge protection (DC & AC), AFCI (arc-fault) protection, DC reverse-polarity protection 💧 IP66 Rated: Dust- and water-resistant for outdoor installation 🔄 Dual MPPT: 2 MPPT inputs for maximum solar production ⚙️ Wide Voltage Range: Start-up voltage 180V, max PV input 1,100V 📦 Lightweight & Compact: 22.1 kg for easier handling and installation Technical Specifications Rated Power: 15,000 W Weight: 22.1 kg Min PPT Voltage: 180 V Max PPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 22,500 W Max AC Power (5 mins): 16,500 W Surge AC Power (1 sec): 16,500 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98 % Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Important Notes This inverter does not include: Data logger CT Meter Export power manager This 15kW three-phase inverter is ideal for high-capacity systems, offering high efficiency, robust protection, and dual MPPT tracking to maximise solar energy yield while maintaining long-term reliability. The meter is required for export power control of one inverter. If using more than 1 inverter, use the EPM3-5G-PLUS. The meter requires a data logging stick but the EPM3-5G-PLUS has a built in data logger. These items are sold separately. This system must be installed by a certified / qualified technician.

Solis inverter S6 8.0kW Triple MPPT - Single Phase with DC #2: SOL-8.0-S6-TT-DC Solis Warranty   The Solis SOL-8.0-S6-TT-DC PV Inverter is a powerful and efficient single-phase inverter designed for high-capacity residential and light commercial solar PV systems. With a rated output of 8,000W, it delivers outstanding energy conversion, advanced MPPT control, and flexible system design for demanding UK solar installations. Developed by Solis, one of the world’s leading inverter manufacturers, this model combines cutting-edge research with proven field reliability. Advanced Engineering & Global Expertise Designed by a World-Class R&D Team Solis inverters are engineered by an international team of professors and specialists from 8 countries, ensuring world-class product design, durability, and performance. Proven Quality & Reliability Praised globally for high quality and long-term reliability, Solis inverters are trusted in residential, commercial, and utility-scale projects worldwide. High Performance & Energy Optimisation Exceptional Conversion Efficiency With a Euro efficiency of 97.3% and peak efficiencies exceeding 97%, this inverter ensures maximum usable energy from your solar array. Precise MPPT Algorithm The advanced MPPT control dynamically tracks the optimal operating point of your PV modules, maximising energy harvest throughout the day in changing UK weather conditions. Ultra-Wide Voltage Range Supporting a wide MPPT voltage range from 90V to 520V, this inverter offers excellent flexibility for array design and improved low-light performance. Installation Flexibility & System Design Triple DC Input for Complex Layouts Featuring 3 DC inputs and 2 MPPTs, the SOL-8.0-S6-TT-DC allows for multiple string configurations, ideal for roofs with different orientations or shading zones. Integrated Safety & Simplicity The built-in DC switch enhances system safety and simplifies maintenance, while MC4 connectors ensure secure and reliable connections. Technical Specifications Electrical Ratings Rated Power: 8,000 W Max DC Power: 10,400 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,000 W Max Input Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V MPPT Voltage Range: 90 – 520 V Max DC Current: 37.5 A System Configuration Phases: Single Phase MPPT Quantity: 2 Max DC Inputs: 3 Has Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 4 Transformer: None Efficiency & Physical Details Euro Efficiency: 97.3% Weight: 12.5 kg Warranty: 5 Years Why Choose the Solis SOL-8.0-S6-TT-DC? ✔ Ideal for large residential and light commercial systems✔ High efficiency with precise MPPT tracking✔ Flexible design with triple DC input✔ Wide voltage range for superior performance✔ Backed by world-class R&D and global reliability✔ Excellent performance-to-cost ratio  

Fox 15kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-15.0 Inverters - Main Units Fox T Series 15.0kW Datasheet Fox T Series 15.0kW Install Guide Fox T Series 15.0kW Warranty Fox T Series 15.0kW G99 Certificate Fox ESS T Series 15kW 3-Phase Grid-Tied Inverter The Fox ESS 15kW T Series Inverter is a high-performance grid-tied inverter, engineered for 3-phase residential homes and small-scale commercial installations. With its dual MPPT design, robust build, and cloud connectivity, this inverter delivers exceptional efficiency and reliability. The T Series ranges from 6.0kW to 25.0kW, making it a versatile solution for a wide range of solar PV systems. Key Features Powerful 15kW output – ideal for residential and light commercial applications Dual MPPT design – ensures maximum solar generation efficiency Plug-and-play installation – quick, simple, and time-saving IP65 rated – suitable for both indoor and outdoor installations FoxESS Cloud monitoring – track system performance remotely from any device High efficiency – up to 98.6% round-trip efficiency Technical Specifications Rated Power: 15,000W Weight: 20kg Min PPT Voltage: 140V Max PPT Voltage: 1,100V DC Startup Voltage: 140V DC Shutdown Voltage: 1,100V Max Input Voltage: 1,100V Max DC Power: 22,500W Max AC Power (5 Minutes): 15,000W Surge AC Power (1 Second): 16,500W Max DC Current: 28A Max DC Inputs: 4 DC Fuses: 4 Connector: MC4 (4 included) Euro Efficiency: 97.8% Transformer: N/A MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 Years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

EcoFlow PowerOcean:  1ph Inverter Smart Home Energy    #3: 6861 Storage Systems - Hybrid Inverter   EcoFlow PowerOcean Hybrid Brochure EcoFlow PowerOcean Hybrid Datasheet EcoFlow PowerOceean Hybrid User Manual EcoFlow PowerOcean Hybrid Installation  Guide EcoFlow App Manual EcoFlow G-98 Certification EcoFlow Warranty   Smart, Scalable, and Safe Solar Power for UK Homes Take control of your energy future with the EcoFlow PowerOcean 3.68kW Hybrid Inverter—a powerful and intelligent solar inverter designed for modern UK households. Combining high-efficiency solar energy conversion, advanced lithium iron phosphate (LFP) battery compatibility, and industry-leading safety features, PowerOcean is your foundation for power independence. Whether you’re powering a compact flat or a large residential property, EcoFlow PowerOcean offers unmatched scalability, reliability, and control through the EcoFlow App and Web Portal. Enjoy seamless energy monitoring, battery management, and solar optimisation—all from your smartphone. Key Features Scalable Battery Storage: Expandable up to 15kWh with over 6,000 charge cycles for long-term reliability. Smart Monitoring: View real-time power usage, solar input, and battery status via the EcoFlow App and Web Portal. Advanced Safety Features: Built with LFP battery tech, a fire prevention module, and IP65-certified weatherproof housing. 15-Year Warranty: Confidence backed by a long-term manufacturer guarantee. Plug-and-Play Expansion: Future-proof design ensures easy upgrades with additional battery modules. Technical Specifications DC Attributes Max PV Power: 3.68kW Max Voltage: 600V Max Isc (Short Circuit Current): 20A Max Current (per MPPT): 18A (1x PV input) 16A (2x PV input) No. of MPPTs: 2 MPPT Voltage Range: 90–520V AC Attributes Max AC Output Power: 3.68kW Max Current: 18.4A Number of Phases: 1 System Information Max Efficiency: 96.5% IP Rating: IP65 (Dust-tight & weatherproof for outdoor use) Weight: 20.6kg Dimensions: 679.6 × 182.7 × 280mm What's In the Box? 1 x EcoFlow PowerOcean 3.68kW single phase hybrid inverter unit AC & DC interconnection kit External smart CT meter (for monitoring) User manual & app access for installation & monitoring Why Buy the EcoFlow PowerOcean 3.68kW Inverter? If you’re a homeowner in the UK looking to reduce reliance on the grid, store more of your solar energy, gain reliable backup, and invest in a system that can grow with you, the EcoFlow PowerOcean 3.68 kW Single Phase Hybrid Inverter is a strong choice. Its combination of smart tech, safety features and scalability make it more than just a basic inverter—it’s a long‑term energy platform.

Victron EasySolar-II 48V 3000VA MPPT 250/70 GX #17: Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX (48V 3000VA) Victron EasySolar Data Sheet Victron EasySolar Manual  To view our full range of Victron products visit our main Victron page here Victron EasySolar All-in-One Solar Power Solution Overview The Victron EasySolar is an integrated solar power system combining a MPPT solar charge controller, an inverter/charger, and AC distribution in a single compact enclosure. Designed for ease of installation, it reduces wiring complexity and saves both time and space. The system is ideal for off-grid solar setups or backup power applications. Key Features All-in-one design: MPPT controller, inverter/charger, and AC distribution in one unit Easy installation: Minimises wiring and setup time PowerAssist technology: Prevents utility or generator overload by supplementing with inverter power Dual MPPT: Two BlueSolar MPPT controllers for maximum energy harvest 24V model: BlueSolar MPPT 100/50, supporting up to 3 PV strings 48V model: BlueSolar MPPT 150/35 for larger PV arrays AC distribution: Includes RCD (30mA/16A) and four protected AC outputs (two 10A, two 16A) Flexible battery charging: Charge from PV, utility grid, or genset Inverter Specifications Input Voltage Range: 19–33V (24V model) Continuous Output Power: 3000VA / 2500W Peak Power: 6000W Maximum Efficiency: 94% Zero-Load Power Consumption: 15–16W Charger Specifications AC Input: 187–265VAC, 45–65Hz Charger Current: 70A (24V) / 35A (48V) Solar MPPT Controller Specifications Max PV Open Circuit Voltage: 100V (24V model) Max PV Power: 2 × 1400W (24V) Max Output Current: 2 × 50A Enclosure Details Weight: 21 kg Dimensions (H × W × D): 362 × 374 × 218 mm The Victron EasySolar offers a compact, efficient, and versatile solution for off-grid solar installations, combining high-efficiency MPPT charge control, robust inverter/charger performance, and safe AC distribution in one convenient unit.

Victron EasySolar-II 24/3000/70-32 MPPT 250/70 GX (2400W) G98 approved #20: PMP242307010 Victron EasySolar Data Sheet Victron EasySolar Manual  To view our full range of Victron products visit our main Victron page here Victron EasySolar-II GX – All-in-One Solar Power Solution Overview The Victron EasySolar-II GX is a complete solar energy system that combines a MultiPlus-II inverter/charger, SmartSolar MPPT charge controller, and GX monitoring device into a single, prewired unit. Designed for residential and commercial installations, it simplifies setup, reduces costs, and ensures efficient energy management. Key Components MultiPlus-II Inverter/Charger: Provides seamless AC/DC power conversion and battery charging. SmartSolar MPPT Solar Charge Controller: Optimises solar energy harvesting and supports parallel DC connections. GX Device with Display: Features a 2 x 16-character screen for real-time monitoring of the inverter, battery, and solar charge controller. Smart Monitoring & Connectivity Display & Wi-Fi: Monitor battery and system parameters via the built-in display or on a smartphone using Wi-Fi. Set up and adjust system settings remotely. GX Device Interfaces: BMS-CAN Interface for compatible CAN-bus managed batteries. USB Port for system updates and data management. Ethernet Port for network connectivity and remote monitoring. VE.Direct Port to control the SmartSolar MPPT charge controller. Benefits Prewired Integration: Reduces installation complexity and saves time. All-in-One Control: Monitor and manage inverter, battery, and solar charging from a single unit. Flexible Connectivity: Supports multiple ports and interfaces for seamless integration with batteries and networks. Reliable Energy Management: Ensures optimal performance of your solar PV system.

Sunsynk ACURE 3.6Kw On & Off grid Hybrid solar & wind Inverter WiFi Included   #5/20/22: SUNSYNK SUNC1−3.6LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Sunsynk ACURE 5Kw On & Off grid Hybrid solar & wind Inverter WiFi Included  #5/20/22: SUNSYNK SUNC1−5.0LV01B Sunsynk ACURE Data Sheet Sunsynk ACURE Warranty Sunsynk ACURE Manual   To view our full range of Sunsynk products visit our main Sunsynk page here   Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW) Warranty is applicable to 10 years when matched with a Sunsynk battery. Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation. Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit. Key Features & Benefits Smart Energy Management – Optimise energy usage with programmable wireless smart switches Expandable System – Connect up to 10 wireless smart switches for tailored load control Integrated 40A Smart Switch – Reliable power distribution built-in Advanced Connectivity – Built-in Bluetooth, Wi-Fi, LAN (Ethernet), and LoRa Real-Time Monitoring – Track generation, consumption, and battery performance User-Friendly Interface – New intuitive UI for installers and end users Automatic Load Shedding – Prioritises essential loads during power outages Multi-Colour LED Status Display – Instant system visibility Built for Performance & Flexibility The Sunsynk Acure hybrid inverter is available in: Single-phase: 3.6kW – 8kW Three-phase: 5kW – 12kW Suitable for: Solar PV systems Battery storage installations Wind turbine integration EV charging systems Hot water tank control Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability. Smarter Installation, Cleaner Finish Designed with installers in mind: Wireless CT coil reduces cabling requirements Hinged terminal cover for faster, safer access Discreet cable routing for a clean, professional finish IP65 rated – suitable for indoor & outdoor installation Advanced Safety & Protection Safety is at the core of the Sunsynk Acure system: Arc Fault Detection (AFCI) – Reduces fire risk Solar Panel Theft Detection – Alerts on tampering or disconnection Rapid Shutdown Capability Generator Compatibility – Dry contact start for backup power Integrated Protections Include: DC reverse polarity protection AC overcurrent & overvoltage protection Short circuit protection Thermal protection Ground fault & earth fault detection Residual current (RCD) monitoring Surge protection Islanding protection DC insulation monitoring ✔ G98 / G99 Compliant Total Control with Sunsynk Connect Pro Unlock full system visibility with Sunsynk Connect Pro: Monitor energy usage in real time Remote system control via mobile app Installer remote commissioning & diagnostics Multi-site fleet management for commercial users Firmware updates over the air Why Choose Sunsynk Acure? All-in-one hybrid inverter + energy management system Faster installs with wireless integration Advanced safety and protection features Scalable for homes, businesses, and commercial sites Fully compatible with modern smart energy ecosystems Perfect For Homeowners reducing energy bills Commercial energy optimisation Solar + battery storage systems Off-grid and backup power solutions Smart energy and load management setups Warranty & Support Inverter Warranty: 10 years 61.4kWh HV Battery: 10 years IP65 5.12kWh Battery: 5 years CATL 5.12kWh Battery: 10 years Warranty Conditions UK-based installations are automatically covered Proof of purchase from installer is required Failure to provide proof of purchase may void warranty

Fox 7kW K Series Single Phase Hybrid Inverter 2: FE-KH1-7.0 Storage Systems - Hybrid Inverter #3 5986 Fox K Series 7kW Datasheet Fox K Series 7kW Manual Fox K Series 7kW Warranty Fox K Series7kW G100 Certification FoxESS KH7 7kW Single-Phase Hybrid Inverter The FoxESS KH7 is a sleek 7kW single-phase full hybrid inverter built with IP65 protection and high-voltage battery compatibility. Designed for maximum efficiency, it delivers a 97.4% round-trip efficiency, ensuring you get the best performance from your solar installation. Its triple MPPT design allows for optimal solar production even with panels on multiple roof orientations, while its expandable battery capacity makes it a flexible and future-proof solution. Key Features IP65 Rated – dust and water resistant, perfect for outdoor installation Remote Monitoring – manage and track system performance anywhere Expandable Storage – compatible with all Cube & EP batteries Triple MPPT Design – ensures maximum energy harvest from multiple arrays High Round-Trip Efficiency – up to 97% system efficiency Plug & Play Installation – supplied with CT clamps and meter for convenience Included in the Box CT Clamps Meter Technical Specifications Weight: 29 kg Rated Power: 7,000 W Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power (5 minutes): 10,500 W Max AC Power (5 minutes): 7,000 W Surge AC Power (1 second): 7,700 W Max DC Current: 48 A Max DC Inputs: 3 DC Fuses: None Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 3 Integrated DC Switch: Yes Warranty: 5 years Why Choose the FoxESS KH7? The FoxESS KH7 inverter combines high efficiency, expandability, and smart monitoring in a compact design. It’s the ideal choice for homeowners and small businesses seeking to maximize solar production and ensure long-term reliability with flexible battery storage options. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10,000W Home Wave Inverter - Three Phase   SolarEdge 10kW 3-Phase Inverter – Network Ready, SetApp Enabled The SolarEdge SE-10000-3PH-NET inverter is a high-efficiency, network-ready 3-phase inverter designed for commercial and larger residential solar PV systems. Built with fixed-voltage technology and digital control architecture, it ensures maximum energy harvest while maintaining best-in-class reliability. Please note: This inverter does not include an integrated display and requires SolarEdge Power Optimizers to function. Key Features: High Efficiency: Advanced power conversion architecture for superior solar harvesting Fixed-Voltage Technology: Ensures optimal input voltage for consistent energy output SetApp Enabled: Quick and easy commissioning using the SolarEdge SetApp Network Ready: Seamless integration for system monitoring and performance tracking UK Compliant: Tested to G98/G99 standards with latest firmware Compact & Reliable: Durable design for long-lasting operation Technical Specifications: Part Number: SE-10000-3PH-NET Rated Power: 10,000 W Phases: 3 MPPT Trackers: None (requires Power Optimizers) Weight: [Add weight if known] Firmware Update Required: Yes, during SetApp commissioning Warranty: [Add warranty if available] Ideal for installers and system owners seeking a robust, network-enabled 3-phase inverter solution for large solar PV arrays, with all the benefits of SolarEdge monitoring and optimization.

Fox 8kW K Series Single Phase Hybrid Inverter #2: FE-KH1-8.0 Storage Systems - Hybrid Inverter Fox K Series 8.0kW Datasheet Fox K Series 8.0kW Manual Fox K Series 8.0kW Warranty Fox K Series 8.0kW G100 Certificate The FoxESS KH8 is a powerful and sleek 8kW single-phase full hybrid inverter, designed to deliver maximum efficiency and flexibility for UK solar PV systems. With support for high-voltage battery storage, triple MPPT design, and advanced monitoring via the FoxESS Cloud, it ensures optimal solar production and intelligent energy management. Engineered for long-term performance and easy installation, the FoxESS KH8 is the ideal choice for homeowners seeking to reduce grid reliance and expand energy storage capacity over time. Key Features ✅ Easy to Install – compact and user-friendly design ✅ IP65 Rated – weatherproof for indoor or outdoor use ✅ FoxESS Cloud Remote Monitoring – track and manage energy performance anywhere ✅ Scalable Battery Options – compatible with all FoxESS Cube & EP batteries ✅ Triple MPPT – maximises yield from different roof orientations ✅ High Round-Trip Efficiency – up to 97% for optimal energy use ✅ CT Clamps and Meter Included – everything you need in the box Technical Specifications General Weight: 29 kg Rated Power: 8,000 W Euro Efficiency: 97.4% Warranty: 5 years Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 601 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 Minutes): 8,000 W Surge AC Power (1 Second): 8,800 W Max DC Current: 48 A Connections Max DC Inputs: 3 Connector: MC4 (6 included) Has Integrated DC Switch: Yes DC Fuses: No Transformer: None MPPT Quantity: 3 Why Choose the FoxESS KH8 Hybrid Inverter? Designed with UK solar PV systems in mind Provides scalable storage options for future energy needs Offers reliable outdoor performance with IP65 protection Delivers high-efficiency solar conversion with triple MPPT Backed by 5-year manufacturer’s warranty for peace of mind ✅ The FoxESS KH8 is the perfect 8kW hybrid inverter for maximising solar energy, integrating flexible battery storage, and building a future-ready energy system. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

Fox ESS 25.0kW T Series 3PH Dual Tracker PV Inverter #2: FE-T-25.0 Inverters - Main Units Fox T Series 25.0kW Datasheet Fox T Series 25.0kW Installation Manual Fox T Series 25.0kW User Manual Fox T Series 25.0kW Warranty Fox T Series 25.0kW G99 Certificate Fox Battery Sizing Guide   FoxESS T Series – 3-Phase Hybrid Inverter (25 kW) The FoxESS T Series range is ideal for 3-phase residential homes and small-scale commercial installations. Featuring dual MPPT technology, this inverter supports systems from 6.0 kW up to 25.0 kW, delivering high efficiency, reliability, and flexible energy management. Features Easy Plug & Play Installation – Quick and simple setup. IP65 Rated – Suitable for indoor and outdoor environments. Remote Monitoring – Monitor system performance via the FoxESS Cloud. High Efficiency – Round-trip efficiency up to 98.6%. Technical Specifications Weight: 21 kg Rated Power: 25,000 W Min MPPT Voltage: 140 V Max MPPT Voltage: 1,100 V DC Startup Voltage: 140 V DC Shutdown Voltage: 1,100 V Max Input Voltage: 1,100 V Max DC Power: 37,500 W Max AC Power (5 Minutes): 25,000 W Surge AC Power (1 Second): 27,500 W Max DC Current: 28 A Max DC Inputs: 4 DC Fuses: 4 Connector Type: MC4 Included Connectors: 4 Euro Efficiency: 97.8% Transformer: None MPPT Quantity: 2 Integrated DC Switch: Yes Warranty: 5 years Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.  

SolarEdge 10 kWh Three Phase on grid solar Inverter #1: SE-10000-3PH-APP Inverters - Main Units #4: SE10K-RW0TEBEN4 SolarEdge 10kWh Data Sheet SolarEdge 10kWh User Manual SolarEdge G98 Certificate   SolarEdge SE10K 10kW Three-Phase Inverter (SetApp, No Display) ⚠️ Important: This inverter has no MPPT trackers and requires SolarEdge Power Optimisers to operate. The SolarEdge SE10K three-phase inverter delivers advanced solar energy conversion with a streamlined, single-stage architecture. Designed to work exclusively with SolarEdge power optimisers, it ensures maximum system efficiency, safety, and reliability for residential and commercial installations. Thanks to fixed-voltage technology, the inverter consistently operates at its optimal input voltage, independent of string length or environmental factors. The SetApp configuration (via smartphone) replaces the traditional screen, offering a simple and modern commissioning process. 🔑 Key Features Requires SolarEdge Power Optimisers (not included) Modern SetApp commissioning (no screen required) Fixed-voltage technology for consistent efficiency One-stage power conversion for improved reliability High energy harvesting even in complex designs Integrated safety features, including DC switch Backed by a 12-year warranty (extendable options available) 📊 Technical Specifications Rated AC Power: 10,000 W Phases: 3 Euro Efficiency: 97.3% Minimum / Maximum Input Voltage (PPT): 750 V – 900 V Max DC Power: 15,500 W Max DC Current: 15 A Max Input Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V MPPT Trackers: 0 (optimiser required) DC Inputs: 2 Has Integrated DC Switch: Yes Weight: 17.6 kg Warranty: 12 years ✅ Perfect for larger residential or commercial PV systems where SolarEdge optimisers are used for maximum yield, module-level monitoring, and safety compliance.

Fox 9kW K Series Single Phase Hybrid Inverter #2: FE-KH1-9.0 Storage Systems - Hybrid Inverter Fox 9.0kW K Series Data Sheet Fox 9.0kW K Series User Manual Fox 9.0kW K Series Warranty Fox 9.0kW K Series G100 Certification FoxESS KH9 9kW Single Phase Hybrid Inverter – Full IP65 Protection Harness maximum efficiency and flexibility with the FoxESS KH9 9kW single-phase hybrid inverter, designed for high-voltage battery systems to optimise solar power usage. Ideal for residential installations, this inverter provides advanced features, remote monitoring, and high-performance reliability. Key Features High round-trip efficiency – up to 97% for maximum energy savings IP65 rated – suitable for outdoor installation 4 MPPT's – ensures optimal solar production from multiple array orientations Expandable battery capacity – compatible with Cube & EP batteries Remote monitoring and control – via FoxESS Cloud web portal or smartphone app CT clamps and meter included – for easy setup and monitoring Warranty Registration Standard warranty: 5 years Extended 10-year warranty – register your installation directly with Fox online Click here for warranty registration and review the warranty documentation for full details Technical Specifications Rated Power: 9,000 W Max AC Power (5 minutes): 9,000 W Surge AC Power (1 second): 9,900 W Min PPT Voltage: 80 V | Max PPT Voltage: 500 V DC Startup Voltage: 75 V | DC Shutdown Voltage: 601 V Max DC Power: 13,500 W | Max DC Current: 64 A Max DC Inputs: 4 | MPPT Quantity: 4 Connector: MC4 | Included Connectors: 6 Transformer: None Euro Efficiency: 97.4% Has Integrated DC Switch: Yes The FoxESS KH9 inverter combines performance, safety, and smart monitoring, making it a perfect choice for homeowners seeking reliable, efficient, and flexible solar energy storage.

Fox 10kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.0 Storage Systems - Hybrid Inverter#3: 5989 Fox 10.0kW Datasheet Fox 10.0kW Manual Fox 10.0kW Warranty Fox 10.0kW G100 Certificate FoxESS KH10 – 10kW Single-Phase Hybrid Inverter The FoxESS KH10 is a high-performance, single-phase hybrid inverter designed to optimise solar energy usage in residential and small commercial installations. With IP65 rating, high-voltage battery compatibility, and 4 MPPT technology, this inverter maximises round-trip efficiency and ensures optimal energy production from your solar system. With remote monitoring via FoxESS Cloud and included CT clamp for zero-export control, the KH10 offers convenience, flexibility, and efficiency in one compact design. Key Features ✅ 10kW single-phase hybrid inverter – ideal for high-capacity solar systems ✅ High-voltage battery compatibility – works with Cube & EP batteries ✅ IP65 rated – suitable for outdoor installations ✅ Remote monitoring and control – via smartphone or web portal ✅ 4 MPPT's – ensures maximum solar production ✅ High round-trip efficiency – 97% for optimal energy usage ✅ Expandable battery capacity – add batteries as your energy needs grow ✅ CT clamp included – for zero-export functionality Technical Specifications General Weight: 29 kg Rated Power: 10,000 W Euro Efficiency: 97.4% Transformer: None MPPT Quantity: 4 Voltage & Current Min PPT Voltage: 80 V Max PPT Voltage: 500 V DC Startup Voltage: 75 V DC Shutdown Voltage: 75 V Max Input Voltage: 600 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 10,000 W Surge AC Power (1 Second): 10,500 W Max DC Current: 64 A Max DC Inputs: 4 Connections Connector Type: MC4 Included Connectors: 8 DC Fuses: 0 Integrated DC Switch: Yes Why Choose the FoxESS KH10 Hybrid Inverter? Efficient energy conversion – get the most from your solar panels Scalable energy storage – compatible with multiple battery types User-friendly monitoring – control and track performance remotely Robust outdoor design – IP65 rating ensures durability Zero-export ready – included CT clamp for grid compliance ✅ The FoxESS KH10 10kW Hybrid Inverter is a high-efficiency, scalable solution that combines reliability, advanced monitoring, and maximum energy utilisation for residential and small commercial solar installations.

Fox 10.5kW K Series Single Phase Hybrid Inverter #2: FE-KH1-10.5 Storage Systems - Hybrid Inverter Fox 10.5kW Datasheet Fox 10.5kW Manual Fox 10.5kW Warranty Fox 10.5kW G100 Certificate   FoxESS K Series 10kW Single Phase Hybrid Inverter Harness the full potential of your solar energy system with the FoxESS K Series 10kW single-phase hybrid inverter. Designed for efficiency and flexibility, this IP65-rated inverter is ideal for indoor or outdoor installations and works seamlessly with high-voltage batteries for maximum round-trip efficiency. Key Features Stylish and Robust Design: IP65-rated enclosure suitable for outdoor environments. High Efficiency: High-voltage battery compatibility ensures up to 97.4% round-trip efficiency. Remote Monitoring & Control: Access and control your system easily via FoxESS Cloud. Easy Installation: Lightweight design at 29kg, saving time and effort on-site. Battery Compatibility: Works with Cube & EP batteries. Zero Export Control: CT clamp included for safe and compliant energy management. Technical Specifications Specification Value Weight 29 kg Rated Power 10,500 W Minimum PPT Voltage 80 V Maximum PPT Voltage 500 V DC Startup Voltage 75 V DC Shutdown Voltage 601 V Maximum Input Voltage 600 V Maximum DC Power 15,000 W Maximum AC Power (5 min) 10,000 W Surge AC Power (1 sec) 10,500 W Maximum DC Current 64 A Max DC Inputs 4 DC Fuses 0 Connector MC4 Included Connectors 8 Euro Efficiency 97.4 % Transformer None MPPT Quantity 4 Integrated DC Switch Yes Why Choose the FoxESS K Series? The FoxESS K Series combines sleek design, reliable performance, and advanced technology to give you complete control over your solar energy. Its high-efficiency performance and flexible battery compatibility make it an excellent choice for homeowners looking to optimise their solar storage and energy management. Remember to register your install with Fox online to activate the 10 year product warranty, otherwise it's 5 years as standard. Please click here for registration page.Please check the warranty document for more information.

SolarEdge 9000W Home Wave Inverter - Three Phase   #1: SE-9000-3PH-NET Inverters - Main Units SolarEdge 9000W Data Sheet SolarEdge 9000W Manual SolarEdge 9000W G100 Certificate SolarEdge Warranty SolarEdge 9000 3-Phase Inverter – High-Efficiency Solar Power Solution The SolarEdge 9000 3-Phase Inverter delivers superior solar power harvesting with a compact, efficient, and highly reliable design. Perfect for residential and light commercial solar installations, it works seamlessly with power optimisers to maximise energy production from each solar module. Key Features Fixed-Voltage Technology Ensures the inverter always operates at the optimal input voltage, regardless of string length or environmental conditions, for maximum efficiency and reliability. Optimiser-Ready Design This inverter requires SolarEdge power optimisers to function, enabling module-level performance monitoring and enhanced safety. Smart App Integration Compatible with SetAPP commissioning for easy configuration and monitoring. UK certified for G98 and G99 compliance (firmware must be updated during commissioning). Compact & Lightweight At 16.4 kg, the inverter is easy to install, even in tight spaces. Advanced Safety Features Integrated DC switch No trackers, simplifying maintenance and reducing potential points of failure Technical Specifications Rated Power: 9,000 W Phases: 3 Min PPT Voltage: 750 V Max PPT Voltage: 900 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max DC Power: 9,450 W Max AC Power (5 Minutes): 7,000 W Surge AC Power (1 Second): 7,000 W Max DC Current: 12 A Max DC Inputs: 2 Connector Type: MC4 Euro Efficiency: 97.4 % MPPT Quantity: 0 Transformer: None Weight: 16.4 kg Warranty: 12 years Why Choose the SolarEdge 9000? With high efficiency, robust UK compliance, and seamless SetAPP commissioning, this inverter is an ideal choice for installers seeking reliable, high-performing 3-phase solar solutions.

Victron MultiPlus-II 48/8000/110-100230V #17: Victron MultiPlus-II 48/8000/110-100230V (48V - 110A Charger - 100A) Victron Data Sheet Victron Manual To view our full range of Victron products visit our main Victron page here Victron MultiPlus-II All-in-One Solar Power Solution Overview The Victron MultiPlus-II is the latest generation all-in-one solar inverter/charger, combining the capabilities of the MultiPlus and MultiGrid ranges. Designed for both off-grid and grid-connected PV systems, it integrates a true sine wave inverter, a high-speed AC transfer switch, and a sophisticated battery charger in a single compact enclosure. The MultiPlus-II also supports advanced energy storage system (ESS) functionality and external current sensing for optimal self-consumption. Key Features MultiPlus plus ESS functionality: Includes all MultiPlus features with anti-islanding and global approvals PowerControl & PowerAssist: Limit generator or grid current while redirecting excess power to battery charging or peak shaving External Current Transformer Option: Enables precise energy management and self-consumption optimisation (max. 32A) On-site monitoring & control: Adjust settings via MK3-USB interface in minutes Remote monitoring & control: Compatible with Victron GX devices and VRM portal High reliability: Proven Victron engineering with 40+ years of renewable energy expertise Firmware updates: Continuous software improvements based on community feedback Specifications DC Input Voltage: 38–66V (48V nominal) Continuous Output Power: 10,000VA / 8,000W Peak Power: 18,000W Maximum Efficiency: 96% Zero-Load Power Consumption: 38W AC Input: 187–265VAC, 45–65Hz Maximum Charge Current: 140A (48V) AC Transfer Relay: 100A Battery Connections: M8 bolts (2 positive, 2 negative) Dimensions (H × W × D): 677 × 363 × 206 mm Weight: 49 kg Warranty: 5 years Installation & Benefits Simple installation with fully illustrated, colour-coded wiring and mounting diagrams Advanced protection systems and software functionality for reliable performance Ideal for home, commercial, or hybrid solar installations Remote firmware updates provide new features and improvements over time The Victron MultiPlus-II is a premium all-in-one inverter/charger solution, delivering high efficiency, robust energy management, and scalable ESS functionality for both off-grid and grid-connected solar systems.