Newest Products

Enphase Q-Relay for IQ7/IQ7+ Three Phase #1: Q-RELAY-1P-INT #3: 3791 Enphase Q Relay – Single Phase Network System Relay Controller The Enphase Q Relay (Single Phase) is a dedicated network system relay controller designed to ensure safe disconnection and reconnection of Enphase microinverters from the AC grid. Acting as a galvanic disconnection device, it enhances safety, compliance, and system reliability in solar PV installations. When grid voltage or frequency falls outside of acceptable limits, the Q Relay disconnects the microinverters from the grid. Once conditions return to normal, it safely reconnects them, ensuring seamless operation and protection for both the grid and your Enphase system. ⚠️ Important: The Enphase Q Relay is only available to purchase with Enphase Microinverters. Key Features ✅ Single-phase design with built-in contactors ✅ Automatic safety disconnect during grid abnormalities ✅ Reconnection once voltage and frequency stabilise ✅ Built-in current sensing to detect DC injection (VDE V 0126-1-1 compliant) ✅ Works with Enphase Envoy-S to break both line and neutral per grid requirements ✅ IP20 Rated – must be mounted in a protected enclosure ✅ Best practice installation – fit with the Envoy-S before commissioning Technical Overview Application Ensures Enphase microinverters comply with grid safety standards Provides galvanic isolation for single-phase solar installations Compliance & Safety Meets VDE V 0126-1-1 requirements for DC current detection Works in combination with the Enphase Envoy-S Installation Guidance Install alongside Envoy-S and microinverters Mount within a protected IP-rated enclosure Refer to full installation documentation at enphase.com/support Why Use the Enphase Q Relay? Provides essential grid safety compliance for Enphase systems Protects both your solar installation and the electrical grid Designed for seamless integration with Envoy-S and Enphase microinverters Required component for professional Enphase installations in the UK ✅ The Enphase Q Relay ensures your solar PV system remains safe, compliant, and efficient – an essential addition when installing Enphase Microinverters.

GROWATT MIC 2000TL X Single MPPT with Dc Solar Inverter   #2: GROWATT-MIC2000-TL-X-DC #3: 5392 GROWATT 2000TL X Data Sheet GROWATT 2000TL X Manual GROWATT 2000TL X Warranty GROWATT 2000TL X G100 Certificate   Growatt 2000TL X – Single MPPT Residential Solar Inverter The Growatt 2000TL X is a high-efficiency, single-phase inverter designed specifically for residential rooftop solar installations. Combining reliability, flexibility, and advanced technology, this inverter ensures maximum energy harvest while providing a compact and lightweight solution for UK homes. Key Features High-Efficiency Power Conversion Maximum efficiency of 97% with European efficiency of 96.5%. MPPT tracking accuracy of 99%, optimising solar panel output in all conditions. Transformerless design for lighter and easier installation. Flexible and User-Friendly Power factor continuously adjustable for better grid integration. Easy-to-read OLED display with touch key interface. Single MPPT allows simple and efficient array connection. Robust and Reliable Wide DC input voltage range ensures compatibility with most PV modules. Non-DC version suitable for standard residential applications. Integrated DC switch for safe operation and maintenance. Warranty & Support Backed by a 10-year manufacturer warranty, giving peace of mind for long-term use. Technical Specifications Electrical Attributes Rated Power: 2,000 W Phases: 1 Min MPPT Voltage: 50 V Max MPPT Voltage: 500 V DC Startup Voltage: 50 V DC Shutdown Voltage: 50 V Max DC Power: 2,600 W Max AC Power (5 Minutes): 2,000 W Surge AC Power (1 Second): 2,000 W Max DC Current: 13 A MPPT Quantity: 1 Physical & System Weight: 6.5 kg Connector: Amphenol H4 Included Connectors: 1 Euro Efficiency: 97% Integrated DC Switch: Yes

SolarEdge 10Kwh Energy Bank - 1PH 400V 10kWh Battery v02 #2: SE-BATTERY02-10KWH#3: 4015#4: BAT-10K1PS0B-02 SolarEdge 10Kwh Datasheet SolarEdge 10Kwh Installation Manual Branch Connector required for adding additional battery Floor stand if required SolarEdge Energy Bank – High Voltage DC-Coupled Residential Storage The SolarEdge Energy Bank is a high voltage, DC-coupled battery storage solution, optimised to integrate seamlessly with existing SolarEdge residential systems. By leveraging high voltage DC storage, the system improves efficiency through direct DC-DC conversion, eliminating unnecessary DC-AC conversions and maximising the storage of solar-generated energy. Integrated fully with SolarEdge inverters and StorEdge interfaces, the Energy Bank enables homeowners to manage PV generation, battery storage, EV charging, and smart device control through a single platform – the SolarEdge app – simplifying both installation and daily operation. Key Features High Voltage DC-Coupled Storage: Minimises energy losses for maximum solar efficiency Optimised for SolarEdge Systems: Fully compatible with StorEdge HD-Wave inverters Scalable Capacity: Supports up to 3 batteries per inverter for increased power and storage NMC Lithium-Ion Technology: 9.7kWh capacity, 5kW output, 100% depth of discharge Superior System Efficiency: PV → Battery → Grid for optimal energy utilisation Single-App Management: Monitor production, consumption, and storage from the SolarEdge app Installation & Design Flexible Mounting Options: Floor or wall mountable Plug & Play Configuration: Pre-defined settings simplify setup UL9540A & IEC62619 Certified: High safety standards for fire and operational safety Streamlined Mechanical Design: No fire extinguisher required in the installation package Warranty & Reliability 10-Year Warranty: Guaranteed minimum 70% capacity at the end of warranty Unlimited Discharge Cycles: Ensures long-lasting performance for residential use SolarEdge Support: Single point of contact for warranty, training, and technical support Why Choose SolarEdge Energy Bank Maximises savings by efficiently storing and using solar energy Seamless integration with SolarEdge inverters and EV charging solutions Simplified installation and management with a single monitoring app Designed with UK homes and safety standards in mind Please note installers must be trained and certified in order to install this battery. Installer certification course is available in the Solar Edge Edge Academy.

SolaX 3.7kW G4-V2 Hybrid inverter with WiFi #1: X1-HYBRID-G4-3.7-V2 SolaX 3.7kW Data Sheet SolaX 3.7kW Manual SolaX 3.7kW Warranty SolaX 3.7kW G98 Certificate For a full list of SolaX products click here. SolaX G4-V2 HV Single Phase Hybrid Inverter & Charge Controller The SolaX G4-V2 represents the fourth generation of single-phase hybrid inverters and AC charge controllers, combining high efficiency, fast charging, and robust performance. Ideal for residential solar systems, this inverter maximises solar energy utilisation while providing smart battery management and enhanced reliability in harsh environments. Key Features Supports up to 150% PV Oversizing: Maximise solar input for consistent energy production. Fast Charging Speeds: Charge the Triple Power battery in almost one hour. High Reliability: Tested under extreme temperatures, HALT tested, salt spray tested, and full-load aging tested. Quick Installation: Reduced installation time with pre-configured connections and SUNCLIX connectors. Element Protection: Operates efficiently in temperatures as low as -30°C. Wi-Fi Included: Built-in Wi-Fi for remote monitoring and system control – no additional purchase required. Battery & PV Management: Integrated charge controller optimises solar and battery usage for maximum efficiency. Specifications Rated Power: 3,680 W Max DC Power: 5,500 W Max AC Power (5 Minutes): 3,700 W Surge AC Power (1 Second): 3,701 W Min PPT Voltage: 125 V Max PPT Voltage: 550 V DC Startup Voltage: 125 V DC Shutdown Voltage: 125 V Max Input Voltage: 600 V Max DC Current: 28 A DC Inputs: 2 Connector Type: SUNCLIX (2 included) MPPT Quantity: 2 Euro Efficiency: 97% Integrated DC Switch: No Weight: 24 kg Warranty: 10 years

SolaX X1 G4 Hybrid Inverter 6kW #1:  X1-HYBRID-G4-6.0  #3: 4442 Solax X1 G4 Data Sheet Solax X1 G4 User Manual Solax X1 G4 Warranty Solax X1 G4 G99   SolaX X1 G4 Hybrid 6.0D – 4th Generation Hybrid Solar Inverter The SolaX X1 G4 Hybrid 6.0D represents the latest 4th generation of SolaX hybrid inverters, offering improved performance, enhanced reliability, and flexible energy storage options. Perfect for UK households and small commercial properties, this hybrid inverter allows you to store surplus solar energy in batteries for later use while retaining all the core features of previous generations. Key Features Intelligent Hybrid Functionality Stores excess solar energy in batteries for on-demand use. Functions as both an inverter and battery storage controller – ideal for retrofits or new installations. Supports up to 150% PV oversizing, ensuring maximum energy harvest. Built-in Safety & Reliability EPS (Emergency Power Supply) changeover switch included for backup during outages. Operates at full capacity in extreme temperatures down to -35°C. IP65-rated for outdoor installations, protecting against dust and water ingress. High Performance & Efficiency 30A charge/discharge capability for fast battery management. On-grid and off-grid operation for flexible system design. Max efficiency of 97.6%, ensuring optimal energy conversion. Connectivity & Monitoring Includes WiFi dongle for real-time system monitoring and remote management. Technical Specifications AC Attributes Max Power: 6,000 W Max Current: 28.6 A Number of Phases: 1 DC Attributes Max Power: 9,000 W Max Isc Current: 16 A Max Voltage: 600 V Start-up Voltage: 90 V System & Physical Max Efficiency: 97.6% IP Rating: IP65 Weight: 22 kg Dimensions: 482 × 417 × 181 mm

SolaX X1-FIT G4 7.5W (AC Coupled Inverter) #3: 4578 Sola X1 FIT Data Sheet Solax X1 FIT User Manual Solax X1 FIT Warranty Solax X1 FIT G99 Certification   SolaX X1-FIT G4 7.5kW (AC Coupled Inverter) The SolaX X1-FIT G4 7.5kW AC Coupled Inverter Charger is designed to upgrade existing solar PV systems with reliable battery storage functionality. Compatible with any single-phase inverter brand, it delivers up to 97% efficiency and is built for both indoor and outdoor installations. With remote monitoring via the SolaX Cloud, homeowners can optimise energy usage and maximise savings. Benefits of the SolaX X1-FIT G4 Store excess solar energy for later use, reducing grid reliance Provides emergency power supply (EPS) during power cuts Compact, lightweight design with IP65 weatherproof rating Supports grid trading applications with rapid response times Compatible with high-voltage batteries, reducing cabling costs Advanced Features High Performance & Efficiency Max. efficiency: 97% Max. 7.5kW power output with 40A current AC attributes: Single-phase, 7500W max power Smart Energy Management VPP (Virtual Power Plant) function for smart grid trading Remote firmware upgrades and control Flexible peak shaving to balance grid demand Charging from the grid supported Reliable & Low Maintenance Natural cooling system for quiet operation Robust IP65 rating for indoor/outdoor use WiFi or LAN connectivity options available separately Technical Specifications AC Attributes Max Power: 7500W Max Current: 40A Phases: 1 System Performance Max Efficiency: 97% IP Rating: IP65 Weight: 23kg Dimensions: 482 × 417 × 181mm For a full list of SolaX products click here.

1m Red & Black 35mm Cable Cable Pack & Accessories for Keto Fuse Connector This cable pack is designed for use with a Keto fuse connector (sold separately), providing all the essential wiring components to ensure a safe and reliable connection. Ideal for solar, battery, or inverter setups. Package Includes: 1 × BATCAB35-1M – 1m 35mm² Black Cable 1 × BATCAB35-1M-RED – 1m 35mm² Red Cable Features: Complete Cable Kit: Everything needed for a proper Keto fuse connection. High-Quality Components: Heavy-duty cables and lugs for durability and safety. Easy Installation: Pre-cut cables and pre-sized lugs simplify the setup process. Ensure your battery or inverter installation is safe, compliant, and hassle-free with this ready-to-use cable pack.

Growatt TPM Three Phase Smart Meter for Export Limitation #3: 2906 Growatt SPM Data Sheet Growatt SPM Manual Growatt SPM Guide   Growatt Smart Meter for Three-Phase Systems The Growatt Smart Meter enables accurate export limitation for three-phase solar installations, giving you full control over the amount of energy exported to the grid. Compatible with Growatt inverters that have the latest firmware and an RS485 port, this meter ensures seamless integration for smart energy management. Key Features Three-Phase Compatibility: Designed for three-phase Growatt inverters. Export Limitation Control: Easily set export limits via the Growatt ShinePortal, ShineLAN, or ShineLink. Alternatively, configure in-situ with a laptop using Growatt ShineBus software. Hardwired Design: Suitable for cables up to 16mm²; for larger cables, the CT version (Eastron SDM630MCT) is required. Enhanced Energy Management: Enables efficient monitoring and management of solar power distribution. Installation Notes Requires an inverter with RS485 connectivity. Ensure the inverter firmware is up to date for full functionality. Hardwired installation; maximum cable tail size 16mm². Why Choose Growatt Smart Meter? Optimise your solar system’s performance and stay grid-compliant with precise export limitation. Perfect for residential or small commercial installations, the Growatt Smart Meter provides easy configuration, reliable operation, and full monitoring capabilities.

Growatt SPM Single Phase Smart Meter for Export Limitation #3: 2905 Growatt SPM Data Sheet Growatt SPM Manual Growatt SPM Guide   Growatt Smart Meter – Single Phase Systems Overview The Growatt Smart Meter is designed for single-phase systems and allows you to implement export limitation, helping manage the energy you feed back to the grid. Features Works with inverters featuring an RS485 port. Provides real-time monitoring of energy consumption and export. Enables accurate export limitation settings. Compatible with Growatt Shine portal for remote management. Setup Options Via Growatt Portal: Export limitation is simplest to configure when the inverter is connected to the Growatt Shine platform using ShineLAN or ShineLink. In-situ Setup: Can also be configured locally with a laptop using Growatt ShineBus software. Benefits Helps comply with grid regulations for maximum export limits. Optimizes self-consumption of solar energy. Enables simple monitoring and management of energy flow for single-phase installations.

MyEnergi Libbi 5kW Hybrid + 5kWh Battery All-in-One Battery Storage System #3: 4716 2: MYEN-LIBBI-505SH Libbi 5kW Datasheet Libbi 5kW Installation Manual Libbi 5kW Operation Instructions Libbi 5kW G99 Certificate Myenergi Libbi 5kW Hybrid Inverter & Battery Kit – Smart Solar Energy Storage for UK Homes The Myenergi Libbi is the latest all-in-one hybrid inverter and home battery package, designed to maximise solar energy efficiency and reduce grid reliance. This advanced system combines a 5kW hybrid inverter with a 5kWh Libbi home battery, with the option to expand up to 20kWh by connecting four batteries in parallel. 2 systems in parallel possible with 1st system being the master. Built for the UK energy market, the Libbi offers emergency power supply (EPS) backup, ensuring your home has power during unexpected blackouts. With seamless integration across the Myenergi ecosystem (including zappi EV chargers and eddi energy diverters), the Libbi delivers complete home energy control. Key Benefits of the Myenergi Libbi Hybrid System Ultimate Energy Control Take charge of your surplus solar generation and reduce dependency on the UK grid. Optimised for Smart Tariffs Charge your battery at the cheapest times using time-of-use tariffs or dynamic pricing, helping you save money. Seamless Myenergi Integration Works with your existing eddi and zappi devices, prioritising stored electricity for your home and EV charging. Expandable Modular Storage Start with 5kWh and expand up to 20kWh, giving you flexibility to match your household’s energy needs. Blackout Protection (EPS) Keep essential circuits running during power cuts with the emergency power supply feature. Remote Monitoring via Myenergi App Access and control your system from anywhere with live energy data, usage reports, and smart scheduling. What’s Included in This Kit? 1 × 5kW Libbi Hybrid Inverter 1 × 5kWh Libbi Home Battery 1 × Myenergi Controller 1 × Libbi Cable Expansion Kit (5kWh) Technical Specifications AC Output Max Power: 5000W Max Current: 22A Phases: Single Phase System Performance Max Efficiency: 97.6% IP Rating: IP65 (indoor & outdoor use) Built-In Protection: AC & DC surge protection (Type II), arc fault detection Export Limitation: Possible with CT or meter Weight: 32kg Dimensions: 540 × 590 × 240mm Communication: 1 × LAN port (RJ45 connector) Warranty: 5 years DC Attributes – Inverter MPPT Trackers: 2 MPPT Voltage Range: 120V – 550V Max DC Power: 6500W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 Nominal Voltage: 51.2V Max Charge Current: 100A Max Discharge Current: 100A Max Charge Power: 4600W Max Discharge Power: 5000W Why Choose the Myenergi Libbi from ITS Technologies? Official UK supplier of Myenergi hybrid inverter and battery systems Expert support and professional installation options available Flexible financing and fast UK delivery Backed by 5-year inverter warranty and 10-year battery warranty FAQs Can I expand the Libbi storage system? Yes – you can connect up to four batteries in parallel, increasing capacity to 20kWh. Does the Libbi work with existing solar panels? Yes – it can be installed as both AC-coupled or DC-coupled, making it suitable for retrofits or new PV systems. Is the Libbi suitable for UK outdoor installation? Yes – with an IP65 rating, it is fully weatherproof for both indoor and outdoor use. Will the Libbi keep my home running in a blackout? Yes – the EPS backup function can power a dedicated socket or essential circuits during outages.

Libbi 5kW Hybrid + 10kWh Batteries All-in-One Battery Storage System #3: 4717 2: MYEN-LIBBI-510SH Libbi 5kW Datasheet Libbi 5kW Installation Manual Libbi 5kW Installation Manual Libbi 5kW G99 Certificate Myenergi Libbi 5kW Hybrid Inverter + 10kWh Battery Kit – Eco-Smart Energy Storage for UK Homes The Myenergi Libbi is more than just a battery system – it’s an eco-smart hybrid inverter and modular storage solution designed to give you full control over your home energy. This package combines a 5kW Libbi hybrid inverter with two 5kWh home batteries, providing a total storage capacity of 10kWh, expandable up to 20kWh by adding additional modules. 2 systems in parallel possible with 1st system being the master. Built for seamless integration with the myenergi ecosystem – including eddi solar diverters and zappi EV chargers – Libbi intelligently manages when to charge, discharge, and store electricity. Whether it’s from your solar panels or the UK grid during off-peak hours, the Libbi helps you cut energy costs, reduce grid dependency, and keep power flowing during outages with its emergency power supply (EPS) feature. Key Benefits of the Myenergi Libbi Eco-Smart Energy Control Libbi makes intelligent decisions about charging and discharging based on your solar generation, household demand, and electricity tariff. Optimised for Smart Tariffs Take advantage of the cheapest electricity rates by charging at off-peak times with time-of-use or dynamic tariffs. Seamless Myenergi Integration Works perfectly with zappi EV chargers and eddi energy diverters, prioritising stored energy to power your home and EV. Modular, Expandable Storage Each battery module stores 5kWh. With two included here, you have 10kWh capacity, expandable up to 20kWh. Backup Power Protection (EPS) Ensure essential appliances stay powered during a blackout with Libbi’s emergency supply backup. Remote Access via Myenergi App Control and monitor your energy from anywhere in the world with live data, usage insights, and smart scheduling. What’s Included in This Kit? 1 × 5kW Libbi Hybrid Inverter 2 × 5kWh Libbi Home Batteries (10kWh total capacity) 1 × Myenergi Controller 1 × 10kWh Cable Expansion Kit Technical Specifications AC Output Max Power: 5000W Max Current: 22A Number of Phases: 1 System Performance Max Efficiency: 97.6% IP Rating: IP65 (suitable for outdoor UK installations) Protection: AC & DC surge protection (Type II), arc fault detection Export Limitation: Possible with CT or meter Weight: 32kg (inverter) Dimensions: 540 × 590 × 240 mm Communication: 1 × LAN port (RJ45) Warranty: 5 years DC Attributes – Inverter MPPT Trackers: 2 MPPT Voltage Range: 120V – 550V Max DC Power: 6500W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 Nominal Battery Voltage: 51.2V Max Charge Current: 100A Max Discharge Current: 100A Max Charge Power: 4600W Max Discharge Power: 5000W Why Choose the Myenergi Libbi from ITS Technologies? Trusted UK supplier of myenergi hybrid systems Professional installation and technical support available Fast UK delivery and reliable after-sales care Backed by a 5-year inverter warranty and 10-year battery warranty FAQs How much storage does this kit provide? This kit includes two 5kWh modules, giving a total of 10kWh capacity, expandable up to 20kWh. Can I retrofit Libbi to my existing solar panels? Yes – the Libbi can be installed as both AC-coupled and DC-coupled, making it ideal for retrofits or new PV systems. Is the Libbi weatherproof? Yes – with its IP65 rating, the Libbi is suitable for outdoor installations across the UK. Does Libbi keep my home running in a blackout? Yes – with EPS backup, Libbi can supply a dedicated socket or circuit during power cuts.

Myenergi Libbi 5kW Hybrid + 15kWh Batteries All in one Battery Storage System   #3: 4718 2: MYEN-LIBBI-320SH Libbi 5kW Datasheet Libbi 5kW Installation Manual Libbi 5kW Operating Instructions Libbi 5kW G99 Certificate Myenergi Libbi 5kW Hybrid Inverter + 15kWh Battery Kit – Eco-Smart Energy Storage for UK Homes The Myenergi Libbi is a cutting-edge hybrid inverter and modular battery package, designed to give UK households smarter, greener, and more reliable control over their home energy. This kit combines a 5kW Libbi hybrid inverter with three 5kWh Libbi battery modules, providing 15kWh of storage capacity, expandable up to 20kWh with an additional module. 2 systems in parallel possible with 1st system being the master. More than just a battery, Libbi is eco-smart – it intelligently decides when to store, release, or use electricity based on your solar generation, home energy consumption, and electricity tariff. With emergency power supply (EPS) backup, it also ensures your home remains powered during blackouts. Key Benefits of the Myenergi Libbi Smart Energy Control Reduce reliance on the UK electricity grid by storing surplus solar energy and using it when you need it most. Optimised for Off-Peak Tariffs Libbi identifies the cheapest times to draw electricity from the grid, lowering energy bills by making use of time-of-use tariffs. Seamless Myenergi Ecosystem Integration Works effortlessly with zappi EV chargers and eddi energy diverters, ensuring your home and EV benefit first from stored energy. Modular & Expandable Design Each module stores 5kWh. This kit includes three batteries (15kWh), and you can expand up to 20kWh. Blackout Protection (EPS Backup) Stay protected during power cuts with instant access to stored energy for essential sockets or circuits. Remote Monitoring & Control The Myenergi app gives you full visibility of your home’s energy flow, with live updates and remote control from anywhere. What’s Included in This Kit? 1 × 5kW Libbi Hybrid Inverter 3 × 5kWh Libbi Home Batteries (15kWh total) 1 × Myenergi Controller 1 × 15kWh Cable Expansion Kit Technical Specifications AC Output Max Power: 5000W Max Current: 22A Number of Phases: 1 System Performance Max Efficiency: 97.6% IP Rating: IP65 – weatherproof for outdoor or indoor UK installation Built-In Protection: AC & DC surge protection (Type II), arc fault detection Export Limitation: Supported via CT or meter Weight: 32kg (inverter) Dimensions: 540 × 590 × 240 mm Communication: 1 × LAN port (RJ45) Warranty: 5 years (inverter) | 10 years (battery) DC Attributes – Inverter MPPT Trackers: 2 MPPT Voltage Range: 120V – 550V Max DC Power: 6500W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 Nominal Battery Voltage: 51.2V Max Charge Current: 100A Max Discharge Current: 100A Max Charge Power: 4600W Max Discharge Power: 5000W Why Buy the Myenergi Libbi 15kWh Kit from ITS Technologies? Professional installation and technical support available nationwide Fast UK delivery and secure warranty cover Trusted renewable energy experts with proven customer service FAQs How much energy storage does this kit provide? This package includes three 5kWh modules, giving a total of 15kWh storage, expandable up to 20kWh. Can I use Libbi with my existing solar PV system? Yes – Libbi is compatible with both AC-coupled and DC-coupled solar setups, making it ideal for retrofits or new installations. Is the Libbi weatherproof? Yes – with an IP65 protection rating, it is designed to withstand UK outdoor conditions. Will the Libbi keep my home powered during blackouts? Yes – with the EPS backup function, it provides instant energy to a dedicated socket or circuit during outages.

Myenergi Libbi 5kW Hybrid + 20kWh Battery All-in-One Battery Storage System #3: 4719 2: MYEN-LIBBI-510SH   2: MYEN-LIBBI-B05H   2: MYEN-LIBBI-EK201   Libbi 5kW Datasheet Libbi 5kW Installation Manual Libbi 5kW Operating Instructions Libbi 5kW G99 Certificate Myenergi Libbi 5kW Hybrid Inverter + 20kWh Battery Storage Kit The Myenergi Libbi is a next-generation hybrid inverter and battery package, designed for homeowners who want full control over their energy usage. This complete kit includes a 5kW hybrid inverter and four 5kWh battery modules, providing the system’s maximum 20kWh of storage capacity. 2 systems in parallel possible with 1st system being the master. With its smart energy management, Libbi decides when to store and release power based on your household consumption, solar generation, and electricity tariff. It even includes emergency power supply (EPS) backup, giving you a reliable source of energy during UK power cuts. Key Features of the Libbi 20kWh Kit ⚡ Control Store surplus self-generated solar electricity and reduce dependency on the national grid. 💡 Optimise Automatically capture grid electricity at the lowest tariff rates, perfect for time-of-use and dynamic tariffs. 🔗 Integrate Works seamlessly with other myenergi devices such as eddi (solar diverter) and zappi (EV charger). What’s Included in This Kit? 1 × 5kW Libbi Hybrid Inverter 4 × 5kWh Libbi Home Batteries (20kWh total) 1 × Myenergi Controller 1 × 20kWh Cable Expansion Kit Why Choose the Myenergi Libbi? ✅ Eco-Smart Technology Intelligently manages energy flows, ensuring maximum savings and efficiency. ✅ Modular by Design Each battery module stores 5kWh – combine up to four for 20kWh capacity. ✅ Flexible Installation Supports both AC and DC coupling, making it suitable for new solar PV systems or retrofits. ✅ Remote Monitoring The Myenergi App gives you full control and live monitoring, wherever you are. ✅ Blackout Protection (Optional EPS) Instant power to a dedicated socket or circuit during power cuts. Technical Specifications AC Output Max Power: 5000W Max Current: 22A Phases: 1 System Performance Max Efficiency: 97.6% IP Rating: IP65 – suitable for indoor or outdoor installation Built-In Protection: Type II AC & DC surge protection, arc fault detection Export Limitation: Configurable via CT or meter Weight: 32kg (inverter) Dimensions: 540 × 590 × 240 mm Communication: 1 × LAN (RJ45) Warranty: 5 years (inverter), 10 years (battery) DC Attributes – Inverter MPPT Inputs: 2 MPPT Voltage Range: 120 – 550V Max DC Power: 6500W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 Nominal Voltage: 51.2V Max Charge Current: 100A Max Discharge Current: 100A Max Charge Power: 4600W Max Discharge Power: 5000W Why Buy from ITS Technologies? Expert guidance on system sizing & installation Nationwide delivery and support Warranty-backed, genuine products FAQs How much storage does this kit provide? This package includes 20kWh, the maximum Libbi capacity (4 × 5kWh modules). Can it work with existing solar panels? Yes – Libbi is compatible with both new and retrofit PV systems. Will it work outdoors? Yes – with an IP65 rating, the inverter is fully weather-resistant. Does it provide backup in power cuts? Yes – with EPS enabled, it can supply instant backup power to essential circuits.

Libbi 3.68kW Hybrid + 20kWh Batteries All-in-one Battery Storage System #3: 4715 #2: MYEN-LIBBI-310SH #2:: MYEN-LIBBI-B05H-4 #2: MYEN-LIBBI-EK201 Libbi 3.68kW Datasheet Libbi 3.68kW Installation Manual Libbi 3.68kW Operation Instructions Libbi 3.68kW G98 Certificate Myenergi Libbi 3.68kW Hybrid Inverter + 20kWh Battery Storage Kit The Myenergi Libbi 3.68kW Hybrid Inverter with 20kWh Battery Storage is designed to give you maximum control over your home’s energy use. With four modular 5kWh battery units (20kWh total) and smart integration across the myenergi ecosystem, Libbi allows you to capture, store, and manage electricity exactly when you need it. 2 systems in parallel possible with 1st system being the master. More than just a battery, Libbi is eco-smart. It automatically makes intelligent decisions about when to store and release electricity, based on your household energy usage, solar PV generation, and time-of-use tariffs. This means you’ll always benefit from lower bills, greater independence, and optimised grid usage. Key Benefits of the Libbi 20kWh Kit ⚡ Control Your Energy Store surplus solar power instead of exporting it to the grid Reduce reliance on expensive electricity imports 💡 Optimise Your Savings Automatically charge when grid electricity is cheapest Perfect for time-of-use and dynamic tariffs 🔗 Integrate Seamlessly Works effortlessly with eddi (solar diverter) and zappi (EV charger) Prioritises stored energy to power your home and devices What’s Included in This Kit 1 × 3.68kW Libbi Hybrid Inverter 4 × 5kWh Libbi Home Batteries (20kWh total) 1 × Myenergi Controller 1 × 20kWh Cable Expansion Kit Why Choose the Myenergi Libbi? ✅ Modular by Design Each battery module stores 5kWh. Expandable up to 20kWh total capacity for future flexibility. ✅ Flexible Installation Compatible with both AC and DC coupled PV systems. Retrofit to an existing solar array or integrate with a new one. ✅ Remote Monitoring & Control The myenergi app lets you view live data, monitor imports/exports, and control settings from anywhere. ✅ Optional Blackout Backup (EPS) Supplies instant emergency power to a dedicated socket or lighting circuit during UK power cuts. Technical Specifications AC Output Max Power: 3680W Max Current: 16A Phases: 1 System Performance Max Efficiency: 97.6% IP Rating: IP65 – indoor/outdoor installation Built-in Protection: AC & DC surge protection (Type II), arc fault detection Export Limitation: Possible using CT clamp or smart meter Weight: 32kg (inverter) Dimensions: 540 × 590 × 240mm Communication: 1 × LAN (RJ45) Warranty: 5 years (inverter) / 10 years (battery) DC Attributes – Inverter MPPT Trackers: 2 MPPT Voltage Range: 120 – 550V Max DC Power: 4800W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 (Lithium Iron Phosphate) Nominal Voltage: 51.2V Max Charge Current: 50A Max Discharge Current: 80A Max Charge Power: 3000W Max Discharge Power: 4000W Why Buy from ITS Technologies? Expert advice on product compatibility & installation Genuine stock with full manufacturer warranty Nationwide delivery with trusted support FAQs How much storage does this kit provide? This package provides the maximum Libbi capacity of 20kWh using four 5kWh battery modules. Can the Libbi 3.68kW work with existing solar panels? Yes – it’s compatible with both new and retrofit solar PV systems. Is the system weatherproof? Yes – with its IP65 rating, the inverter can be installed indoors or outdoors. Does it provide blackout protection? Yes – with EPS enabled, Libbi can supply instant backup to essential circuits.

Libbi 3.68kW Hybrid + 15kWh Batteries All in one Battery Storage System #3: 4714 #2: MYEN-LIBBI-310SH #2: MYEN-LIBBI-B05H #2: MYEN-LIBBI-EK151 Libbi 3.68kW Datasheet Libbi 3.68kW Installation Manual Libbi 3.68kW Operating Instructions Libbi 3.68kW G98 Certificate Myenergi Libbi 3.68kW Hybrid Inverter + 15kWh Battery Storage Kit Introducing the Myenergi Libbi 3.68kW Hybrid Inverter and 15kWh Battery Bundle, a smart and flexible energy storage solution designed for UK homes. This modular system combines a 3.68kW hybrid inverter with three 5kWh battery modules (15kWh total), giving you full control over how you generate, store, and use electricity. 2 systems in parallel possible with 1st system being the master. The Libbi isn’t just a battery system – it’s eco-smart. It makes intelligent decisions about when to store and release electricity based on your usage patterns, solar PV generation, and time-of-use tariffs. With seamless integration across the myenergi ecosystem, including zappi (EV charger) and eddi (solar diverter), the Libbi helps you maximise savings, reduce reliance on the grid, and keep your home running smoothly. Key Benefits of the Libbi 15kWh Kit ⚡ Control Your Power Store surplus solar energy and reduce dependency on expensive grid electricity. 💡 Optimise Energy Costs Automatically capture electricity at the cheapest tariff rates – ideal for time-of-use and dynamic tariffs. 🔗 Integrate with Myenergi Devices Works seamlessly with eddi and zappi, ensuring your home and devices always prioritise stored energy first. What’s Included in the Kit 1 × 3.68kW Libbi Hybrid Inverter 3 × 5kWh Libbi Home Batteries (15kWh total) 1 × Myenergi Controller 1 × 15kWh Cable Expansion Kit Why Choose the Myenergi Libbi? ✅ Modular Battery Storage Each module stores 5kWh – expandable up to 20kWh with four modules. ✅ Flexible Installation Options Supports AC and DC coupling, and can even run as a standalone battery inverter without solar PV. ✅ Smart Remote Monitoring The Myenergi App allows you to control settings, view live data, and track import/export activity from anywhere in the world. ✅ Optional EPS Backup Provides instant power to a dedicated socket or lighting circuit during power cuts. Technical Specifications AC Output Max Power: 3680W Max Current: 16A Phases: 1 System Max Efficiency: 97.6% IP Rating: IP65 – suitable for indoor or outdoor installation Built-in Protection: AC & DC surge protection (Type II), arc fault Export Limitation: Supported via CT clamp or smart meter Weight: 32kg (inverter) Dimensions: 540 × 590 × 240mm Communication: 1 × LAN (RJ45) Warranty: 5 years (inverter) / 10 years (battery) DC Attributes – Inverter MPPT Inputs: 2 Voltage Range: 120 – 550V Max DC Power: 4800W Max Current: 18A Max Voltage: 580V Startup Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 (Lithium Iron Phosphate) Nominal Voltage: 51.2V Max Charge Current: 50A Max Discharge Current: 80A Max Charge Power: 3000W Max Discharge Power: 4000W Why Buy from ITS Technologies? Genuine stock with full manufacturer warranty Expert advice on system sizing & installation Fast nationwide delivery and after-sales support FAQs How much storage does this kit provide? This bundle includes 15kWh of storage (3 × 5kWh modules), expandable up to 20kWh. Can it work with existing solar panels? Yes – it can be used with new or retrofit PV systems, or as a standalone battery inverter. Is the inverter weatherproof? Yes – with an IP65 rating, the inverter is suitable for both indoor and outdoor use. Does it provide backup power during blackouts? Yes – with the EPS function enabled, the Libbi can supply power to essential sockets or circuits during an outage.

Libbi 3.68kW Hybrid + 5kWh Battery All in one Battery Storage System 3: 4712 2: MYEN-LIBBI-305SH2 Libbi 3.68kW Datasheet Libbi 3.68kWh Installation Manual Libbi 3.68kW G98 Certificate Myenergi Libbi 3.68kW Hybrid Inverter + 5kWh Battery Kit The Myenergi Libbi 3.68kW Hybrid Inverter and 5kWh Battery is a smart, modular energy storage solution for UK homes. Designed for seamless integration with the myenergi ecosystem, this hybrid inverter allows you to store and manage electricity efficiently, maximise solar self-consumption, and reduce reliance on the grid. 2 systems in parallel possible with 1st system being the master. With eco-smart technology, Libbi intelligently decides when to store or release power, considering your energy usage, solar generation, and electricity tariff. Optional emergency power supply (EPS) provides backup power during outages, keeping essential circuits running. Key Features of the Libbi 5kWh Kit ⚡ Control Your Energy Store surplus solar electricity for later use Reduce dependency on grid electricity 💡 Optimise Energy Costs Automatically charge from the grid at the cheapest times Ideal for time-of-use and dynamic electricity tariffs 🔗 Seamless Integration Works with myenergi devices such as eddi (solar diverter) and zappi (EV charger) Prioritises stored energy for home use first What’s Included in This Kit 1 × 3.68kW Libbi Hybrid Inverter 1 × 5kWh Libbi Home Battery 1 × Myenergi Controller Why Choose the Myenergi Libbi? ✅ Modular Storage Design Each battery module stores 5kWh. Expandable up to four modules for a total 20kWh of storage. ✅ Flexible Installation Supports AC and DC coupled PV systems and can function as a standalone battery inverter without solar PV. ✅ Remote Monitoring Control your Libbi from anywhere with the myenergi app, including live monitoring of imports and exports. ✅ Optional EPS Backup Provides instant power to a dedicated socket or lighting circuit during a power cut. Technical Specifications AC Output Max Power: 3680W Max Current: 16A Number of Phases: 1 System Performance Max Efficiency: 97.6% IP Rating: IP65 – suitable for indoor or outdoor installation Built-in Protection: AC & DC surge protection Type II, arc fault Export Limitation: Possible via CT or smart meter Weight: 32kg Dimensions: 540 × 590 × 240mm Communication: 1 × LAN port (RJ45) Warranty: 5 years (inverter) DC Attributes – Inverter Number of MPPT Trackers: 2 Voltage Range: 120 – 550V Max DC Power: 4800W Max Current: 18A Max Voltage: 580V Start-Up Voltage: 130V DC Attributes – Battery Input Battery Type: LiFePO4 (Lithium Iron Phosphate) Nominal Voltage: 51.2V Max Charge Current: 50A Max Discharge Current: 80A Max Charge Power: 3000W Max Discharge Power: 4000W Why Buy from ITS Technologies? Full manufacturer warranty and genuine stock Expert support for system sizing & installation Nationwide delivery and after-sales assistance FAQs How much storage does this kit provide? This package includes 5kWh of storage, expandable to 20kWh with additional battery modules. Can the Libbi 3.68kW work with existing solar panels? Yes – it is compatible with both new and retrofit PV systems or can operate as a standalone battery inverter. Is it weatherproof? Yes – with an IP65 rating, it is suitable for indoor or outdoor installation. Does it provide backup power during blackouts? Yes – the optional EPS ensures instant power to essential circuits in the event of a power cut.

Enphase Q-Relay for IQ7/IQ7+ Three Phase #1: Q-RELAY-3P-INT Enphase Three-Phase Q Relay (Network System Relay Controller) Product Overview The Enphase Three-Phase Q Relay is a galvanic disconnection device designed to protect your solar PV system by safely disconnecting Enphase Microinverters from the AC grid during specified grid abnormalities. It works in conjunction with the Enphase Envoy-S to ensure compliance with grid requirements, including breaking both line and neutral connections. This relay is ideal for single-phase use and includes built-in contactors and current sensing, meeting the VDE V 0126-1-1 standards for DC current injection detection. Note: The Q Relay is IP20 rated and must be mounted inside an environmentally protected enclosure. Key Features Safety and Compliance Automatically disconnects microinverters during grid voltage or frequency abnormalities Reconnects automatically once grid conditions return to acceptable levels Built-in current sensing for DC injection detection Complies with VDE V 0126-1-1 standards Smart Integration Works seamlessly with Enphase Envoy-S Helps meet regulatory requirements for breaking both line and neutral Recommended to install before commissioning your system Installation and Compatibility IP20 rated; must be installed in a protected enclosure Designed for single-phase use Only available for purchase together with Enphase Microinverters Why Choose Enphase Q Relay? Ensures safe operation of your Enphase microinverter system Maintains compliance with UK and European electrical standards Easy integration with existing Enphase Envoy-S systems Enhances system reliability and peace of mind

Enphase Q Cable Sealing Caps   Enphase Q Cable Sealing Cap (EN-Q-SEAL) – Single Item The Enphase Q Cable Sealing Cap is designed to provide reliable protection for unused connectors on your Enphase Q cabling system. These durable female sealing caps are essential for maintaining system integrity and ensuring safe, weather-resistant operation. Each cap is sold as a single item and is required for every unused connector on the Q Cable. ⚠️ Important: Enphase Q Cable Sealing Caps are only available for purchase together with Enphase Microinverters. 🔧 Key Features Ensures safe termination of unused Q Cable connectors Provides protection against dust, moisture, and environmental damage Designed specifically for the Enphase Q Cable system Easy to install – simply plug onto unused connectors Sold as single units (1 cap per unused connector required) 📦 Product Details Specification Details Product Code EN-Q-SEAL Type Q Cable sealing cap (female) Compatibility Enphase Q Cable System Quantity 1 item only Usage Requirement One cap per unused connector Availability Only when purchased with Microinverters 💡 Why Use Enphase Q Cable Sealing Caps? Maintain a secure and reliable Enphase installation Protects your system from environmental exposure Ensures compliance with Enphase installation standards Simple, cost-effective system safeguard

Enphase replacement DC adaptor to MC4 connector #1: EN-Q-DCC-2-INT   Enphase DC Adaptor to MC4 – Replacement Part for IQ7 Microinverters The Enphase DC Adaptor to MC4 is designed for seamless connectivity between your solar panels and Enphase IQ7 microinverters. Perfect as a replacement for lost or damaged adaptors, this single part ensures your system continues to operate safely and efficiently. Key Features High Compatibility: Specifically designed for the Enphase IQ7 microinverter range. Maximum Voltage: Rated up to 100V DC for reliable performance. Single Part Replacement: Ideal for replacing lost or damaged adaptors without buying a full kit. Durable Construction: Built to withstand typical outdoor conditions. Ready for Microinverters: Only available for purchase alongside Enphase microinverters. Important Information Included in IQ7 Kits: This adaptor is already included with all IQ7 microinverter installations. Replacement Use Only: Suitable for situations where the original adaptor is lost or damaged. Purchase Requirement: Must be purchased together with Enphase microinverters. Ensure uninterrupted solar power with the Enphase DC Adaptor to MC4 – a reliable replacement for your IQ7 microinverter system.

Enphase Q Cable 3ph 2.0m Landscape #2: EN-Q-25-17-3P-1   Enphase Q Cable 3ph 2.0m – 60-Cell Landscape Connector Enhance your solar installation with the Enphase Q Cable 3ph 2.0m, designed for 60-cell landscape panels. High-quality, reliable connectors ensure efficient and safe energy transfer. Key Features Optimised for Microinverters Compatible exclusively with Enphase Microinverters for seamless system performance. Durable & Reliable Built to withstand environmental conditions and provide a secure connection for your solar panels. Compact Design 2.0m cable length ideal for standard panel layouts in landscape orientation. Important Information Sold Per Connector Purchase Requirement: Only available to buy when ordered together with Enphase Microinverters. Why Choose Enphase Q Cable? The Enphase Q Cable 3ph ensures safe, reliable, and efficient connections in your solar array. Its design is perfect for landscape-oriented 60-cell panels, helping you achieve maximum energy efficiency with Enphase Microinverters.

20 Enphase Q Cable 3ph 1m Portrait #1: EN-Q-25-10-3P-1 Enphase Q Cable – 3 Phase, 1m Portrait (Price Per Connector) The Enphase Q Cable (3 Phase, 1m Portrait) is a high-quality, pre-terminated cable designed for fast and reliable installation of Enphase Microinverters. Each connector supports a single microinverter, reducing installation time and ensuring a neat, professional finish. ⚠️ Note: This product is only available to purchase together with Enphase Microinverters. 🔑 Key Features Pre-terminated cable for quick and easy installation Designed for three-phase portrait configurations Robust and weather-resistant for long-term reliability Supports efficient and safe connections in Enphase systems 📐 Specifications Cable Type: Q Cable Phase: 3 Phase Connector Spacing: 1m (Portrait layout) Price: Per Connector

Solis Inverter 110kW Three Phase 5G PRO  #1: SOL-110K-5G-PRO-DC #4: Solis-110K-5G-PRO   Solis 110K Data Sheet Solis 110K Manual Solis 110K G99 Certificate     Solis Pro 5G 110kW Three-Phase Grid-Tied Inverter Rating: 110,000W | Phases: 3 | Part of the Pro 5G Series ⚡ High-Efficiency Commercial Solar Inverter The Solis Pro 5G 110kW three-phase inverter is engineered for large-scale commercial and industrial PV systems. With up to 98.5% max efficiency and support for 6–8 MPPT trackers, this inverter ensures maximum energy harvest, even in complex site conditions. Its 150% DC/AC ratio and bifacial module compatibility make it an ideal choice for optimising energy yield. 🔒 Built for Safety IP66 rated for long-lasting outdoor durability AFCI protection to proactively reduce fire risks Premium globally recognised components for enhanced reliability Integrated DC isolators (AC isolator required separately) 🧠 Smart Technology Night SVG function for grid stability support Intelligent string monitoring with smart I-V curve scanning Remote firmware upgrades for simplified operation Optional power line communication (PLC) for easier integration 💰 Economic & Scalable DC side supports “Y” connectors for flexible design Aluminium wire access reduces BOS (balance of system) costs Ideal for large-scale commercial and industrial solar projects 📊 Technical Specifications Rated Power: 110,000 W Max DC Power: 110,000 W Max AC Power (5 min): 110,000 W Surge AC Power (1s): 121,000 W Phases: 3 Max Efficiency: 98% (Euro Efficiency 98%) Voltage Range (MPPT): 160–1,000 V DC Startup Voltage: 180 V Max Input Voltage: 1,100 V Max DC Current: 272 A Max DC Inputs: 16 (MC4 connectors, 32 included) MPPT Quantity: 16 Weight: 93 kg Cooling: Transformerless design Protection: AFCI, DC reverse polarity, IP66 Warranty: 5 years ✅ Why Choose the Solis Pro 5G 110kW? Industry-leading efficiency and safety Smart monitoring with remote management Scalable solution for high-capacity PV projects Backed by Solis’ reputation in reliability and innovation

Solis inverter 20kW S5 3 Phase Dual MPPT - DC #2: SOL-S5-GR3P-20K-DC #4: S5-GR3P20K-DC Solis 20kW Data Sheet Solis 20kW Manual Solis Inverter 20kW Warranty Solis 20kW G100 Certification   Extended 5yr warranty available here Solis Series 5 GR3P Three Phase Inverter – High Power & Efficient Solar Conversion The Solis Series 5 GR3P Three Phase Grid-Tied Inverter is a robust and high-performance solution for large-scale residential and commercial solar installations. Delivering up to 20kW of rated power, this inverter combines high efficiency, advanced safety features, and reliable performance for maximum energy yield. With a wide voltage range and IP66 rating, it is designed to operate in harsh conditions while ensuring long-term reliability. Key Features & Benefits ✔ Exceptional Efficiency & Performance Maximum efficiency of 98.7% for optimal energy production. Ultra-low start-up voltage of 180V and maximum PV input voltage of 1,100V. Maximum AC output power: 22kW. Supports Max PV DC Power: 30kW. ✔ Advanced Safety & Protection Type-II over-voltage surge protection for both DC and AC. Integrated AFCI (DC arc-fault circuit protection). DC reverse-polarity protection and integrated DC switch for safe operation. ✔ Flexible & Reliable Installation Four 16A PV string inputs with MC4 connectors included. IP66-rated enclosure ensures dust and water protection. NRS-097-2-1 certified for UK compliance. ✔ Smart Monitoring Register on SolisCloud for remote upgrades, monitoring, and control. Technical Specifications Rated Power: 20,000 W Phases: 3 Min MPPT Voltage: 180 V Max MPPT Voltage: 1,000 V DC Startup Voltage: 180 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,100 V Max DC Power: 30,000 W Max AC Power (5 min): 22,000 W Surge AC Power (1 sec): 22,000 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 8 Euro Efficiency: 98.1% Transformer: None MPPT Quantity: 2 Weight: 22.94 kg Warranty: 5 years Why Choose Solis Series 5 GR3P? Delivers high-efficiency energy conversion for large solar systems. Advanced safety features like AFCI and surge protection ensure reliable operation. IP66-rated and NRS-certified for installation in harsh UK conditions. Compatible with SolisCloud for remote monitoring and upgrades. ⚡ Maximise your solar energy output with the Solis Series 5 GR3P Three Phase Inverter – a powerful, efficient, and reliable choice for residential and commercial installations.

Solis 2.5kW S6 Dual MPPT - Single Phase with DC #2: SOL-2.5-S6-DT-DC #4: S6-GR1P2.5K-DC Solis Inverter 2.5kW Data Sheet Solis Inverter 2.5kW Manual Solis Inverter 2.5kW Warranty Solis Inverter 2.5kW G100 Certificate   For remote monitoring: Solis Data Logging Stick.For additional 10 year warranty - click here Solis S6 2.5kW Residential Inverter – Single Phase The Solis S6 Series represents the latest generation of residential inverters, offering exceptional efficiency, reliability, and value for small residential and commercial rooftop solar installations. Designed for ease of use, the S6 range combines cutting-edge technology with a compact, installer-friendly design. Key Features High efficiency: Maximum efficiency over 97.7%, with 96.5% European efficiency Dual MPPT design with advanced tracking algorithm for precise energy harvesting Wide input voltage range with ultra-low 60V start-up for early energy production Export Limitation built-in (requires CT clamp, sold separately) Integrated AFCI protection for DC arc-fault detection and system safety IP66 rated enclosure for outdoor durability Quiet operation with fanless design Standard 5-year warranty, extendable up to 10 or 20 years Technical Specifications Supplier Part No: S6-GR1P2.5K-DC Rated Power: 2,500 W Max DC Power: 3,750 W Max DC Inputs: 2 MPPT Quantity: 2 Min/Max PPT Voltage: 60 V – 550 V DC Startup Voltage: 60 V Max DC Current: 28 A Max Input Voltage: 550 V Max AC Power (5 Min): 2,800 W Surge AC Power (1 Sec): 2,800 W Euro Efficiency: 96.5% Connector Type: MC4 (2 included) Integrated DC Switch: Yes Dimensions/Weight: 11 kg Transformer: None Warranty: 5 years (extendable to 10 or 20) The Solis S6 2.5kW inverter is the ideal solution for homeowners and installers seeking a compact, efficient, and affordable solar inverter with advanced safety features and long-term reliability.

Solis 1.5kW Mini S6 Single Tracker with DC isolator #2: SOL-1.5-MINI-S6-DC#4: S6-GR1P1.5K-M-DC Solis Inverter 1.5kW Data Sheet Solis Inverter 1.5kW Manual Solis Inverter 1.5kW Warranty Solis Inverter 1.5kW G100 Certificate   For remote monitoring: Solis Data Logging Stick.For additional 10 year warranty - click here Solis Mini 6S Series Grid-Tie Inverter – Compact & High-Efficiency The All New Solis Mini 6S Series Inverter offers a compact, lightweight, and quiet solution for residential solar installations. Designed for easy installation, this fanless inverter operates at less than 20 dBA, while supporting high-efficiency and bifacial solar modules. Key Features High Efficiency – Super high frequency switching technology with maximum efficiency of 96.6% and Euro efficiency of 95%. Wide Voltage Range – Ultra-low start-up voltage of 60V and maximum PV input voltage of 600V for flexibility. Smart Grid Ready – Integrated DRM (Demand Response Mode) and backflow power control for grid compliance. Enhanced Safety – Integrated AFCI (DC arc-fault circuit protection) and DC switch for emergency shutdown or maintenance. Export Control – Built-in Export Power Manager (EPM) to manage exported electricity. Quiet & Compact – Fanless design produces minimal noise (<20 dBA), weighing only 7.4 kg. Warranty – 5-year standard warranty for peace of mind. Technical Specifications Rated Power: 700 W | Max DC Power: 1,100 W Min MPPT Voltage: 60 V | Max MPPT Voltage: 500 V DC Startup / Shutdown Voltage: 60 V / 50 V Max Input Voltage: 600 V | Max DC Current: 14 A Max AC Power (5 Minutes): 770 W | Surge AC Power (1 Second): 770 W DC Inputs: 1 | Connector Type: MC4 | Included Connectors: 1 Transformer: None | MPPT Quantity: 1 | Has Integrated DC Switch: Yes Why Choose the Solis Mini 6S? The Solis Mini 6S Series Inverter combines compact design, high efficiency, and smart safety features, making it ideal for residential solar installations where performance, safety, and quiet operation matter.

SMA Sunny Tripower X 25kW Solar Inverter - Three Phase #4: STP25-50 SMA 25kW Data Sheet SMA 25kW Manual SMA 25kW Warranty SMA 25kW Declaration of Conformity Sunny Tripower X 25 kW – Advanced 3-Phase Inverter for Commercial & Large Residential Solar Systems The Sunny Tripower X 25 kW is a cutting-edge system solution designed for commercial PV installations and large residential solar projects. Its integrated System Manager function with direct access to Sunny Portal powered by ennexOS allows monitoring of up to five SMA inverters and one energy meter, simplifying system management. High Compatibility with Modern PV Modules Wide input voltage range and high input current capability support latest-generation, high-performance solar panels. Ensures optimal energy yields even in partial shading conditions through SMA ShadeFix technology. Efficient and Safe Operation Innovative enclosure design provides efficient cooling for electronic components, maximising the inverter’s lifespan. SMA ArcFix technology effectively detects electrical arcs and reduces fire risk, ensuring safer system operation. Fast and Centralised Commissioning Quick, centralised setup for all connected devices. Integrated communication and software features simplify monitoring, management, and system updates. Technical Specifications Manufacturer: SMA Solar Phases: 3 Phase Power Rating: 25 kW Inverter Type: String Inverter Number of MPPTs: 3 Built-in DC: Yes Built-in Communication: Integrated Off-Grid Compatible: Yes Dimensions (H x W x D): 728 x 762 x 266 mm Why Choose Sunny Tripower X 25 kW? This inverter delivers high efficiency, advanced safety, and intelligent system management for commercial and large-scale residential solar installations. With enhanced PV compatibility, smart software solutions, and a robust design, it is ideal for long-term, reliable solar energy generation.

SolarEdge 2200W Home Wave Inverter - Single Phase Network Ready #1: SE-2200H-NET #4: SE2200H-RW000BEN4   SolarEdge 2200W Data Sheet SolarEdge 2200W Manual SolarEdge 2200W Warranty SolarEdge 2200W G99 Certificate   SolarEdge Home Wave Inverter 2.2kW – Smart, Efficient Solar Conversion The SolarEdge Home Wave Inverter (2,200W) is a compact, high-efficiency inverter designed to work seamlessly with SolarEdge Power Optimizers and your home solar system. Featuring HD-Wave technology, it delivers industry-leading efficiency, lightweight design, and smart connectivity for easy installation and optimal energy management. This network-ready inverter supports SolarEdge Home Battery integration and module-level monitoring, making it ideal for residential installations. Key Features & Benefits ✔ Optimised Performance Specifically designed for SolarEdge Power Optimizers. Supports 200% DC oversizing for maximum solar energy harvest. Fixed voltage inverter suitable for longer solar panel strings. ✔ Smart & Easy Installation Quick and simple commissioning via SolarEdge SetApp on a smartphone. Extremely compact and lightweight (7.8 kg) for hassle-free installation. Built-in module-level monitoring ensures precise performance tracking. ✔ Advanced Safety & Connectivity Integrated arc fault protection for enhanced safety. Seamless wireless connectivity to SolarEdge Home Battery via optional Home Network platform. Suitable for both indoor and outdoor installations. Technical Specifications Supplier Part No: SE2200H-RW000BEN4 Weight: 7.8 kg Rated Power: 2,200 W Phases: 1 Min MPPT Voltage: 0 V Max MPPT Voltage: 0 V DC Startup Voltage: 0 V DC Shutdown Voltage: 0 V Max Input Voltage: 480 V Max DC Power: 4,400 W Max AC Power (5 min): 2,200 W Surge AC Power (1 sec): 2,201 W Max DC Current: 6.5 A Max DC Inputs: 1 DC Fuses: None Connector Type: MC4 Included Connectors: 2 Euro Efficiency: 98.3% Transformer: None MPPT Quantity: 0 Integrated DC Switch: Yes Warranty: 12 years Why Choose SolarEdge Home Wave Inverter? HD-Wave technology ensures maximum efficiency and energy production. Compact and lightweight design for simple installation. Smart connectivity with SolarEdge Home Battery and monitoring platform. Advanced safety features for reliable and secure operation. ⚡ Upgrade your residential solar system with the SolarEdge Home Wave Inverter 2.2kW – efficient, compact, and ready for smart energy management.

Huawei Backup Box B1 for Three Phase Systems #1: HUA-BACKUP-BOX-B1    Backup Box Data Sheet Backup Box Manual Backup Box Warranty   Huawei Backup Box – Reliable Automatic Backup Power Ensure your home stays powered during outages with the Huawei Backup Box, designed for seamless inverter control in residential rooftop PV systems. Automatic Detection & Switch-Over Instant backup power when the grid fails Switches your Huawei inverter to off-grid mode automatically Returns to grid-tied mode once the mains power is restored Compatibility Works with Huawei SUN2000 series inverters: 3KTL-M1, 4KTL-M1, 5KTL-M1, 6KTL-M1, 8KTL-M1, 10KTL-M1 Key Benefits Reliable power continuity for essential home loads Plug-and-play installation with Huawei inverters Ideal for residential solar PV systems requiring backup functionality This Huawei Backup Box provides peace of mind, keeping your home powered safely and efficiently during grid interruptions.

EVSE test box for zappi RCD testing #1: MYEN-EVSE-TSET-BOX #3: 2948 EVSE Test Box Datasheet EVSE Test Box – Zappi & AC Chargepoint Testing The EVSE Test Box is designed for testing Zappi EV chargers and other AC chargepoints when used alongside a multifunction electrical tester (not supplied). Key Features Compatible with Type 1 and Type 2 connections Suitable for single-phase and three-phase Zappi chargers Perform RCD tests using the test box in conjunction with your multifunction electrical tester Note: A multifunction electrical tester is required to carry out full testing.

Enphase MI frame mount 35 mm #1: EN-EFM-35MM #3: 3135 Enphase Frame Mount – Fast & Reliable Microinverter Installation The Enphase Frame Mount is engineered to make Enphase Microinverters fully compatible with railless and ballasted solar mounting systems. By bolting microinverters directly to the module frame, it eliminates design challenges for both residential and commercial projects. Available in two sizes to fit most solar modules, this solution streamlines installation while reducing material and labour costs. Key Features & Benefits ✔ Faster, Easier Installation Bolt microinverters to module frames on the ground for quicker rooftop installation. Complete module and inverter can be carried up together for drop-in mounting. Simple two-piece bracket design attaches in just three steps. ✔ Cost-Effective Solution Requires fewer parts compared to traditional frame mount systems. Save on material costs and labour time with a more efficient installation process. ✔ Strong & Reliable Design Made from anodized aluminium for strength and corrosion resistance. Specifically engineered for use with Enphase Microinverters, ensuring a secure and long-lasting connection. Technical Details Compatibility: Works with Enphase Microinverters Mount Type: Frame mount for railless & ballasted systems Sizes: Available in two sizes to fit most solar modules Material: Anodized aluminium (rust-free, durable) Why Choose the Enphase Frame Mount? Designed for residential and commercial solar installations Ensures a secure, reliable fit with minimal parts required Reduces both installation time and project costs ⚡ Install smarter, faster, and more affordably with the Enphase Frame Mount for Microinverters – the ideal solution for professional solar installers.

4mm2 single-core DC solar cable 500m - Black #2: CABLE4-1-500 4mm² Single-Core Solar Cable – Black, 500m (H1Z2Z2-K Certified) This 500m black solar cable is supplied on a reusable spool with length labelling for easy installation. Certified to the latest European Standard EN 50618 (H1Z2Z2-K designation), this cable is specifically designed for photovoltaic (PV) systems, ensuring long-lasting safety and performance. It is suitable for use on the DC side of solar installations, with a nominal DC voltage of up to 1.5kV between conductors and up to 1.8kV between conductor and earth. Key Features 500m solar cable with length label & reusable spool Certified to EN 50618 (H1Z2Z2-K designation) Designed for PV systems up to 1.5kV DC (1800V max.) Low Smoke Zero Halogen (LSZH) insulation and sheathing for maximum fire safety Flexible tinned copper conductor (Class 5) for superior durability and conductivity Cross-linked insulation and sheath for enhanced protection Tested at 11kV AC, 50Hz for reliability Wide operating temperature range: -40°C to +90°C Thicker wall sheathing compared to PV1-F for added robustness Supersedes TÜV-approved PV1-F cable Cable Construction Conductor: Flexible tinned copper (Class 5) Insulation: Halogen-free cross-linked compound Outer Sheath: Halogen-free, cross-linked, flame-retardant compound Safety: Double insulation for improved protection Why Choose H1Z2Z2-K Solar Cable? This cable is manufactured to meet EN 50618 standards, offering enhanced durability, fire resistance, and safety compliance. The LSZH design ensures no release of corrosive smoke in case of fire, making it suitable for residential, commercial, and industrial solar installations. ✅ A professional-grade solar cable built for safety, efficiency, and longevity – perfect for installers and solar PV professionals.

4mm2 single-core DC cable 250m - Black #2: CABLE4-1-250 4 mm² H1Z2Z2-K Solar Cable – 250m, Single-Core, Black High-quality solar DC cable designed for photovoltaic (PV) systems, suitable for direct current (DC) applications up to 1.5kV. Manufactured to the latest EN 50618 European standard, this cable ensures safety, reliability, and long-term performance for residential and commercial solar installations. 🔑 Key Features Length: 250m with clear length labeling Conductor: Flexible tinned copper (Class 5) Cross-Section: 4 mm², single-core Voltage Rating: Up to 1.5kV DC Certification: H1Z2Z2-K, EN 50618 compliant Insulation & Sheath: Halogen-free, cross-linked, flame-retardant (Low Smoke Zero Halogen – LSZH) Temperature Range: -40 °C to +90 °C Tested Voltage: 11kV AC, 50Hz ⚡ Why Choose H1Z2Z2-K Solar Cable? Enhanced Safety: Double insulation and LSZH compounds reduce risk in fire scenarios. Durable & Flexible: Cross-linked insulation ensures long life, even in harsh outdoor environments. Compliance: Fully harmonised to the latest European standards, superseding older PV1-F cables. Ideal for PV Systems: Perfect for rooftop and ground-mounted solar installations requiring robust DC cabling.

4mm2 single-core DC cable 1000m - Black #1: CABLE4-1-1000   4 mm² Single-Core Solar Cable – Black, 1000m Length: 1000m, with length label Supplied on a reusable spool for easy handling and storage Electrical Specifications Conductor cross-section: 4 mm² (note: this refers to the cross-sectional area, not the cable diameter) System voltage: 1800 V Rated current: 70 A (according to DIN VDE 0298 part 4) Operating temperature range: -40°C to 120°C Features High temperature and UV-resistant, suitable for both indoor and outdoor use Resistant to ammonia, ozone, mineral oil, and acids Excellent fire resistance Colour: Black Note: It is important to select the correct cable specification for your project. Assistance is available if required.

4mm2 single-core DC cable 100m - Black #2: CABLE4-1-100 #3:  E6S10040BK100 CABLE4-1-100 – 100m, 4mm² Single-Core H1Z2Z2-K Certified Solar DC Cable The CABLE4-1-100 is a premium-quality, single-core solar DC cable, designed for safe and efficient energy transmission in photovoltaic (PV) systems. Manufactured to the latest EN 50618 standard with H1Z2Z2-K certification, this cable is ideal for direct current (DC) applications up to 1.5 kV. 🔑 Key Features Length: 100 meters Cross-Section: 4 mm² Core: Single-core, black Certification: H1Z2Z2-K, EN 50618 Voltage Rating: Up to 1.5 kV DC (max 1800 V) Temperature Range: -40°C to +90°C Low Smoke, Zero Halogen (LSZH) Insulation Flexible, Tinned Copper Conductor (Class 5) ✅ Benefits High Safety Standards The double-insulated, LSZH design ensures minimal smoke and non-toxic emissions in case of fire, making it safe for indoor and rooftop PV installations. Durable & Weather-Resistant Cross-linked insulation and sheath provide excellent resistance against UV, heat, and environmental wear, ensuring long-term stability in outdoor solar applications. Efficient Energy Transmission Flexible tinned copper conductors reduce energy loss and maintain high current-carrying efficiency, perfect for residential and commercial PV systems. Easy Installation Length labels on the cable simplify planning and installation, reducing labour time and errors. 📦 Technical Specifications Conductor: Flexible tinned copper (Class 5) Insulation: Halogen-free cross-linked compound Outersheath: Halogen-free cross-linked flame retardant compound Voltage Test: 11 kV AC, 50 Hz Weight: Lightweight, easy to handle Compliance: EN 50618, H1Z2Z2-K 🌍 Applications DC side connections in residential and commercial PV systems Rooftop solar arrays or ground-mounted PV installations Environments requiring fire-safe, low-smoke cabling New installations or retrofits for solar power generation 💡 CABLE4-1-100 – Premium, safe, and efficient 100m solar DC cable for reliable photovoltaic energy systems.

10mm2 single-core DC solar cable 100m - Black #2: CABLE10-1-100 100m Solar Cable – 10mm² Cross-Section (Black, Reusable Spool) This 100m solar cable (10mm²) is designed for high-performance photovoltaic (PV) systems, providing long-lasting reliability in both residential and commercial installations. Supplied on a reusable spool with length label, it ensures convenience, durability, and reduced installation time. Built to withstand UV, heat, oils, acids, ammonia, and harsh weather conditions, this cable is ideal for demanding solar environments. With excellent fire resistance and temperature tolerance, it guarantees safe and efficient energy transmission. ⚡ Key Features 10mm² Cross-Section Conductor – Optimised for efficient energy transmission (not cable diameter). High Voltage & Current Rating – Supports up to 1800 V system voltage and 70 A current (DIN VDE 0298 part 4). Wide Temperature Range – Operates reliably from -40°C to +120°C. Durability Guaranteed – Resistant to UV, ammonia, ozone, mineral oil, and acid. Excellent Fire Resistance – Built for maximum safety in all environments. Reusable Spool with Length Label – Easy handling and reduced waste. Colour: Black 🔧 Technical Specifications Length: 100m (supplied on spool) Conductor Cross-Section: 10 mm² System Voltage: 1800 V Rated Current: 70 A (DIN VDE 0298 Part 4) Operating Temperature: -40°C to +120°C Resistance: UV, ozone, ammonia, mineral oil, acid Fire Resistance: Excellent Colour: Black 🌍 Applications Residential solar PV systems Commercial and industrial solar installations Outdoor and indoor wiring for harsh environments Long-lasting cable management for high-performance solar arrays 👉 Choose the 100m 10mm² Solar Cable for a safe, durable, and efficient solar wiring solution—perfect for professional solar installations in the UK and beyond.

Solis inverter 3kW S6 Dual MPPT - Single Phase with DC #2: SOL-3.0-S6-DT-DC Solis 3kW Data Sheet Solis 3kW Manual Solis 3kW Warranty Solis 3kW G100 Certificate   Solis S6 3,000W Single-Phase Residential Inverter – Dual MPPT The Solis S6 3,000W Inverter is the latest generation of residential inverters, designed for high efficiency, smart energy management, and reliable performance. Ideal for small residential and commercial rooftop solar installations, this inverter maximises energy harvest while providing advanced safety features. Key Features High Efficiency – Maximum efficiency over 97.7% and European efficiency over 97.1%. Dual MPPT Design – Precise MPPT algorithm ensures maximum energy extraction from multiple strings. Wide Input Voltage Range – Low startup voltage and wide range for better generation. Smart Export Control – Built-in export limitation function (requires CT clamp, sold separately) and DRM support. Enhanced Safety – Integrated AFCI (DC arc-fault circuit protection) and built-in DC switch. Durable & Weatherproof – IP66 rated for outdoor installation. Easy Installation – Lightweight design (11.2 kg) with MC4 connectors included. Technical Specifications Rated Power: 3,000 W | Max DC Power: 4,500 W Min MPPT Voltage: 90 V | Max MPPT Voltage: 520 V DC Startup / Shutdown Voltage: 120 V / 90 V Max Input Voltage: 600 V | Max DC Current: 28 A Max AC Power (5 Minutes): 3,300 W | Surge AC Power (1 Second): 3,300 W DC Inputs: 2 | Connector Type: MC4 | Included Connectors: 2 Euro Efficiency: 96.6% | Transformer: None | MPPT Quantity: 2 Weight: 11.2 kg | Warranty: 5 Years Why Choose the Solis S6 3,000W Inverter? The Solis S6 3,000W Inverter delivers reliable, high-efficiency performance with advanced dual-MPPT technology, integrated safety features, and smart export control—perfect for homeowners and small businesses aiming to maximise their solar energy output.