Newest Products

Solis 150kW S6 3Phase 7x MPPT #2 SOL-S6-GC150K  Inverters - Main Units Solis S6 150kW Inverter Data Sheet Solis S6 150kW Inverter Manual Solis S6 150kW Inverter Certificate of Conformity Solis S6 150kW 3-Phase Grid-Tied Inverter – 7 MPPT (400V AC) Part No: SOL-S6-GC150KCategory: Inverters – Main UnitsRating: 150,000WPhases: 3 The Solis S6-GC3P150K07-NV-ND 150kW three-phase inverter is a next-generation commercial and industrial (C&I) string inverter engineered for high-power PV systems. Designed to support large-format 182mm and 210mm modules, this inverter delivers high current handling, flexible system design, and intelligent monitoring to maximise energy yield. With 7 MPPTs, up to 225kW DC input capacity, and support for a 150%+ DC/AC ratio, the S6 150kW enables optimised array design and improved return on investment for commercial installations. High-Power Performance for C&I PV Systems The S6 150kW inverter is built for large rooftop and ground-mounted systems where efficiency and scalability are critical. Performance highlights include: 150kW AC output power Max PV DC power of 225kW 7 MPPTs with 21 string inputs (18A per string) MPPT current up to 48A Supports 150%+ DC/AC oversizing Compatible with 182mm & 210mm high-power modules This flexible configuration allows improved energy harvest across multiple array orientations and string designs. Wide Voltage Range & Optimised Start-Up The inverter features a broad operating voltage range to ensure stable performance across varying site conditions. Key electrical characteristics: Ultra-low start-up voltage: 180V Maximum PV input voltage: 1100V Nominal grid output: 400V AC (3-phase) The wide MPPT range supports efficient operation even during low irradiance conditions. Advanced Safety & Protection Features Engineered to meet commercial safety requirements, the S6 150kW integrates multiple protection mechanisms. Safety features include: Intelligent DC breaking function Intelligent AC/DC terminal temperature monitoring AFCI 2.0 (DC arc-fault circuit protection) Integrated DC switch DC reverse-polarity protection Type II surge protection device (SPD) on both DC and AC sides C5 anti-corrosion protection rating These features enhance system reliability and long-term operational safety in demanding environments. Intelligent Monitoring & O&M Efficiency The inverter integrates seamlessly with SolisCloud, providing advanced online monitoring and remote maintenance capabilities. Smart monitoring tools include: Real-time system performance tracking Smart String I-V Curve Diagnosis Remote firmware upgrades Intelligent fault alerts These features help reduce operation and maintenance (O&M) costs while improving overall system uptime and efficiency. Built for Commercial & Industrial Applications The S6 150kW inverter is ideal for: Large commercial rooftop systems Industrial PV installations Ground-mounted solar farms Multi-string, multi-orientation arrays Its high efficiency, strong DC input capability, and advanced safety functions make it a dependable solution for high-power C&I solar projects. Warranty & Assurance 5-year standard manufacturer warranty Extendable up to 20 years Extended warranty options provide long-term investment protection for commercial installations. Key Technical Summary AC Output Power: 150kW MPPTs: 7 Max DC Input Power: 225kW Max PV Voltage: 1100V Start-Up Voltage: 180V Grid Type: 3-Phase, 400V Protection: AFCI 2.0, SPD Type II (AC/DC), DC Switch Protection Rating: C5 Anti-Corrosion

95mm2 Red Battery Cable set price per 1 meter #2: BATCAB95-1M-PAIR 95mm² Battery Cable Kit – 1m 

Solis S1 WiFi + 4G Cellular Stick USB connection (SIM not included) #2: SOL-S1-W4G-ST-S6-USB-S Solis S1 WiFi + 4G Cellular Stick Datasheet Solis S1-W4G-ST(USB) Installation Manual   Solis S1 WiFi + 4G Data Logging Stick (With SIM) – SolisCloud Ready The Solis S1-W4G-ST WiFi + 4G Cellular Data Logging Stick enables reliable remote monitoring of compatible Solis inverters via SolisCloud. Supplied with a 5-year SIM card included, this USB communication device ensures continuous connectivity through both WiFi and 4G networks. Designed for use with Solis S6 inverters and above, this plug-and-play monitoring solution allows installers and system owners to track performance data in real time. Dual Communication for Reliable Connectivity WiFi and 4G Support The device supports both WiFi and 4G cellular communication, ensuring stable data transmission even in locations where broadband access may be limited. 5-Year SIM Included Supplied with a pre-configured 5-year 4G SIM card, providing long-term monitoring capability without additional network setup requirements. Real-Time Monitoring & Smart Diagnostics SolisCloud Integration Fully compatible with SolisCloud, enabling: Real-time system monitoring Performance tracking Fault detection and alerts Remote troubleshooting Fault Alarm & Status Indicators Built-in status indicators display operating condition, while real-time fault alarms allow quick response to system issues. Easy Installation & Commissioning USB Plug-and-Play Design The USB interface allows fast installation with compatible Solis S6 inverters and newer models. Bluetooth Local Debugging Supports Bluetooth nearby connection for easy on-site configuration and diagnostics. One-Click Reset & Data Transmission Integrated reset button enables quick data resend and simplified commissioning during installation. Compatibility This data logger is designed for use with Solis S6 inverters and above. Always verify inverter compatibility prior to installation. Technical Specifications General Information Product Name: Solis S1 WiFi + 4G Data Logging Stick Supplier Part Number: S1-W4G-ST (With SIM) (USB) Communication: WiFi + 4G Cellular SIM Included: Yes (5 Years) Interface: USB Physical Details Weight: 0.65 kg Why Choose the Solis S1 WiFi + 4G Data Logger? ✔ Dual WiFi and 4G communication for reliable connectivity✔ 5-year SIM card included✔ SolisCloud remote monitoring capability✔ Real-time fault alerts and diagnostics✔ Bluetooth commissioning support✔ Simple USB plug-and-play installation

ClickFit EVO Mounting Profile Trapezoidal Metal Roof Landscape #2: ESD-1008048 EVO Metal Roof Data Sheet  EVO Installation Manual ClickFit EVO is a high-performance solar panel mounting solution developed by Esdec to make installations quicker, simpler, and safer. Designed for professional solar installers, this system is suitable for tiled roofs, steel roofs, corrugated sheets, and standing seam roofs across residential and commercial projects in the UK. With its innovative design and reduced component count, ClickFit EVO helps streamline installations while maintaining strength, reliability, and long-term weather resistance. Smart Click Connection for Faster Solar Installation At the core of ClickFit EVO is its intelligent click connection, allowing solar panels to be securely mounted to the roof quickly and efficiently. The simplified installation process enables installers to complete projects up to 50% faster compared to traditional mounting systems. Key advantages include: Super-fast installation process Smart click mechanism for secure panel fixing Fewer components and reduced installation steps Improved on-site efficiency and lower labour time This makes ClickFit EVO an ideal choice for installers looking to maximise productivity without compromising on safety or performance. Pre-Drilled & Weatherproof Design ClickFit EVO is engineered for ease and durability, featuring: Pre-drilled holes for accurate and time-saving installation Pre-applied EPDM seal for enhanced watertightness Reliable long-term protection against UK weather conditions The integrated EPDM ensures a secure seal at roof penetrations, helping to maintain roof integrity and prevent water ingress. Product Specifications Supplier Part Number: 1008048 Weight: 0.243 kg Application: Solar PV mounting for multiple roof types Brand: Esdec Choose ClickFit EVO for a professional, fast, and weather-resistant solar mounting solution designed to meet the demands of modern UK solar installations.

ClickFit EVO Mounting Profile Trapezoidal Metal Roof Portrait #2: ESD-1008049 EVO Metal Roof Data Sheet  EVO Installation Manual ClickFit EVO is a high-performance solar panel mounting solution developed by Esdec to make installations quicker, simpler, and safer. Designed for professional solar installers, this system is suitable for tiled roofs, steel roofs, corrugated sheets, and standing seam roofs across residential and commercial projects in the UK. With its innovative design and reduced component count, ClickFit EVO helps streamline installations while maintaining strength, reliability, and long-term weather resistance. Smart Click Connection for Faster Solar Installation At the core of ClickFit EVO is its intelligent click connection, allowing solar panels to be securely mounted to the roof quickly and efficiently. The simplified installation process enables installers to complete projects up to 50% faster compared to traditional mounting systems. Key advantages include: Super-fast installation process Smart click mechanism for secure panel fixing Fewer components and reduced installation steps Improved on-site efficiency and lower labour time This makes ClickFit EVO an ideal choice for installers looking to maximise productivity without compromising on safety or performance. Pre-Drilled & Weatherproof Design ClickFit EVO is engineered for ease and durability, featuring: Pre-drilled holes for accurate and time-saving installation Pre-applied EPDM seal for enhanced watertightness Reliable long-term protection against UK weather conditions The integrated EPDM ensures a secure seal at roof penetrations, helping to maintain roof integrity and prevent water ingress. Product Specifications Supplier Part Number: 1008049 Weight: 0.243 kg Application: Solar PV mounting for multiple roof types Brand: Esdec Choose ClickFit EVO for a professional, fast, and weather-resistant solar mounting solution designed to meet the demands of modern UK solar installations.

ClickFit EVO End Clamp Support - Grey (For Trapezoidal Metal Roofs) #2: ESD-1008065 EVO Metal Roof Data Sheet  EVO Installation Manual ClickFit EVO Mounting Solution for Tiled, Steel, Corrugated & Standing Seam Roofs ClickFit EVO is an advanced solar panel mounting solution developed by Esdec to deliver faster, simpler, and safer installations across a wide range of roof types. Designed for professional installers, this innovative system significantly reduces installation time while maintaining exceptional strength and reliability. Compatible with tiled roofs, steel roofs, corrugated sheets, and standing seam roofs, ClickFit EVO is engineered to meet the demands of modern UK solar installations. Fast & Efficient Solar Installation System ClickFit EVO features a smart click connection that enables quick and secure attachment of solar panels to the roof structure. Thanks to its reduced number of components and simplified installation steps, installers can complete projects up to 50% faster compared to traditional mounting systems. Key benefits include: Smart click connection for rapid installation Fewer components for streamlined assembly Reduced labour time and lower installation costs Designed for safety and long-term durability This makes ClickFit EVO an ideal solution for both residential and commercial solar PV projects. Compatible with Trapezoidal & Standard Rails This component is suitable for use on: Trapezoidal rails Standard rails where the rail extends beyond the module field It is designed to be used in combination with the Esdec grey universal module clamp, ensuring a secure and professional solar panel mounting finish. Product Specifications Supplier Part Number: 1008065 Weight: 0.014 kg System: ClickFit EVO Application: Solar panel mounting for multiple roof types Upgrade your solar installation projects with ClickFit EVO – a high-performance mounting system built for speed, safety, and reliability. Ideal for professional UK solar installers seeking efficient and durable mounting solutions.

Solis Data Logging Stick - Wi-Fi & LAN USB #2: SOL-S2-WL-ST-USB Solis Data Logging Stick Wi-Fi & LAN Datasheet Datalogger Compatability Solis USB Data Logger – Wi-Fi & LAN Web Interface for Inverters The Solis USB Data Logger is a 2-in-1 datalogger designed to provide fast, reliable, and convenient data collection for Solis inverters. Supporting both Wi-Fi and LAN communication, it ensures stable real-time monitoring and seamless integration with Solis Cloud. With its plug-and-play design, LED indicators, and one-key reset function, this web interface offers a simple yet powerful way to manage and monitor your solar energy system. Only compatible with Solis inverters with a USB COM port. To check which datalogger is compatible with your Solis inverter, see this link. 🔑 Key Features Dual Connectivity – Supports both Wi-Fi and LAN for flexible communication Seamless Solis Cloud Integration – Reliable data upload and monitoring Plug & Play Setup – Easy installation with fast configuration Real-Time Monitoring – Fault alarms and instant updates for improved system management User-Friendly Design – LED indicators for power, network, and inverter communication Convenient Debugging – One-key reset button for quick troubleshooting Reliable Warranty – 2-year standard Solis accessory warranty ⚙️ Specifications Model: SOL-S2-WL-ST-USB Connectivity: Wi-Fi or LAN Indicators: LED status lights for Power, Network, and Inverter Communication Interface: USB COM port Additional Functions: Fault alarms, reset button Warranty: 2 years ⚡ The Solis Data Logging Stick WiFi & LAN is the perfect solution for ensuring reliable communication, efficient monitoring, and simplified system management for your Solis inverter.

Fox EQ2900 2.88kWh HV Battery (Master) #2: FE-HV-EQM-2900#3: EQ2900-M Fox EQ2900 Datasheet Fox EQS2900 Manual Fox EQS2900 Warranty EQ2900 (2.88 kWh) master and ECS2900 variants from the same EQ/ECS family are interoperable as long as they use the same high-voltage platform and connector type. Fox EQ2900 2.88kWh High-Voltage Battery (Master) – Connector Type A Part No: FE-HV-EQM-2900Category: Storage Systems – Li-ion Battery Pack The Fox EQ2900 High-Voltage Battery (Master) is a modular lithium battery designed for scalable residential and light commercial energy storage systems. As part of the Fox EQ high-voltage battery range, the EQ2900 delivers reliable performance, flexible system expansion, and fast installation through a true plug-and-play design. With 2.88kWh usable capacity per module, the system can be expanded to suit growing energy demands, making it ideal for homeowners seeking future-proof battery storage. Modular & Scalable Energy Storage The Fox EQ system is designed for maximum flexibility. Battery modules are connected in series, allowing storage capacity to grow as required. Key scalability details: 2.88kWh capacity per module Scalable up to 20.16kWh Minimum configuration: 2 modules (1 × Master + 1 × Slave) Maximum configuration: 7 modules per stack (1 × Master + 6 × Slaves) This modular architecture makes the EQ system suitable for a wide range of storage applications while keeping system design simple. High-Voltage Performance & Efficiency The EQ2900 operates as a high-voltage battery, enabling efficient energy transfer and compatibility with Fox high-voltage hybrid and AC-coupled inverters. Performance highlights include: 90% depth of discharge (DoD) for high usable capacity High round-trip efficiency Wide operating temperature tolerance for reliable year-round performance Installer-Friendly Design Designed to save time on site, the EQ battery range features a streamlined installation process with minimal wiring. Installation benefits: Plug-and-play battery modules Compact, stackable design CAN / RS485 communication for system integration Clear Master / Slave architecture for straightforward commissioning Compatibility & System Expansion Notice When adding EQ battery modules to an existing Energy Cube or EQ stack, it is essential that new batteries are compatible with the original modules. Important:Please contact ITS Technologies or your installer before expanding an existing system to confirm correct compatibility and configuration. Safety & Installation Requirements This product must be installed by a qualified electrician or certified installer. All installations must comply with local wiring regulations and electrical standards. ITS Technologies accepts no liability for product malfunctions resulting from incorrect installation or non-compliant system design. Key Specifications at a Glance Battery Type: High-Voltage Lithium-ion Module Capacity: 2.88kWh Max System Capacity: 20.16kWh Configuration: 1 × Master + up to 6 × Slave modules Depth of Discharge: 90% Communication: CAN / RS485 Connector Type: Type A

GSE In-Roof Portrait Top Right Corner Flashing 30mm - Black #2: GSE-ART106408 Minimum order - Available only with other mounting items  GSE Data Sheet GSE Installation Manual  GSE Insurance Certificate Warranty The GSE In-Roof Portrait Top Right Corner Flashing 30mm (Black) is a precision-engineered mounting accessory designed for use with the GSE In-Roof solar mounting system. It provides a secure and weatherproof finish at the top right corner of portrait-oriented in-roof solar arrays, ensuring long-term protection and a seamless roof-integrated appearance. This component is essential for completing professional in-roof PV installations using 30mm framed solar panels. Designed for Integrated Solar Roof Systems Optimised for Portrait Panel Configurations Specifically developed for portrait-mounted solar modules, this flashing ensures proper water drainage and structural alignment at the upper right edge of the array. Compatible with 30mm Framed Modules Designed for accurate fit with 30mm panel frames, ensuring clean integration within the GSE mounting system. Seamless Compatibility with the GSE In-Roof System Fully Integrated Mounting Solution As part of the GSE In-Roof System, this flashing works alongside other GSE components to create a flush, aesthetically pleasing solar installation without traditional above-roof rails. Proven European Market Success The GSE In-Roof System has achieved over 60% market share in residential installations in France and continues to gain popularity due to its simplicity, cost-effectiveness, and reliability. Durable, Lightweight & Installer-Friendly Easy Handling and Installation Weighing just 0.5 kg, this component is lightweight and simple to position, helping installers reduce time on site. Professional Black Finish The durable black finish ensures a consistent appearance that blends seamlessly with solar panels and roofing materials. Technical Specifications General Information Product Name: In-Roof Portrait Top Right Corner Flashing 30mm Mounting Type: In-Roof PV System Component System Compatibility: GSE In-Roof Mounting System Physical Details Supplier Part Number: ART106408 Weight: 0.5 kg Colour: Black Why Choose GSE In-Roof Flashing Components? ✔ Designed for secure, integrated solar roof installations✔ Ensures effective weatherproofing at array edges✔ Compatible with 30mm framed portrait solar panels✔ Lightweight and easy to install✔ Part of a widely adopted European in-roof mounting solution  

Deks Fast Flash 560mm x 5m Roll - Black #2: FFLASH-5560B    Deks Fast Flash Datasheet Deks Fast Flash Installation Guide Minimum order - 1 Fast Flash Self-Adhesive Lead Replacement for Solar PV Systems Overview Fast Flash is a high-quality, self-adhesive lead replacement material ideal for solar panel installations. Designed for durability and ease of use, it ensures watertight protection around roof penetrations and along PV array edges. Perfect for modern solar in-roof systems, Fast Flash is a flexible solution that goes beyond traditional lead flashing. Features Self-adhesive backing for quick and secure installation Suitable for large round or square roof penetrations where Dektite cannot be used Creates a watertight seal in minutes, reducing installation time Can be used as a continuous waterproof border along the bottom or top edge of PV arrays Compatible with GSE In-Roof and Easy Roof In-Roof systems as a sealing strip replacement Benefits Durable and long-lasting: Protects roofs from water ingress Versatile: Works on a variety of solar panel configurations and roof types Cost-effective: Reduces the need for traditional lead and additional flashing components Time-saving: Self-adhesive design speeds up installation and reduces labour

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus S6 Hybrid Data Sheet  Solis Plus 8-10kW Hybrid Data Sheet Fogstar 16.1kWh ECO Datasheet Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT.   Solis 3.6/5/6/8/10kW Hybrid PLUS AI Optimised Inverter with UK based Fogstar Energy ECO 16.1kWh Battery  Solis extended warranty available here The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features Fogstar Energy 48V 16.1kWh ECO Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes CAN & RS485 communication for smooth integration. ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh.   Includes SOL-METER-1PH-EASTRON 

To view our full range of home battery storage packages visit our collection page here To request a bespoke home battery storage quote please complete our quotes form Nationwide Solar & Battery Installations Across the UK We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability. Solis Plus Hybrid Data Sheet Fogstar Battery stack Datasheet Fogstar Battery stack Installation manual Home Backup: Home backup is available by utilising the Fox EPS Box together with the Gateway / EPS wiring.  To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT. Solis 8/10kW Hybrid PLUS AI Optimised Inverter with Fogstar Energy 16.1-64.4kWh Modular Battery Stack  Solis extended warranty available here The Solis Single-Phase Low-Voltage PLUS Energy Storage Inverter is engineered for high-performance residential and light commercial applications requiring reliability, flexibility, and advanced energy control. Featuring 8 MPPT's, FAST UPS-level backup switching, high surge capability, and generator compatibility, the PLUS model is ideal for sites with demanding loads and complex energy profiles. Key Features & Benefits Integrated Backup Port with Automatic UPS Switching for seamless power continuity AI Optimised cloud-based, automated energy management assistant Up to 190A max charge/discharge current for high-power battery performance Up to 200% DC oversizing for enhanced energy harvest Six fully customisable charge/discharge time settings for tariff optimisation 200% surge power capability (10 seconds) to support high inrush loads Generator connectivity with multiple input methods and automatic generator start/stop control Flexible parallel operation supporting both single-phase and three-phase configurations, up to 48kW total Intelligent AC-coupling enables easy retrofitting to existing grid-connected PV systems Peak shaving support in both self-use and generator modes Compatible with lead-acid and lithium batteries, with comprehensive battery protection features The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 2-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. With the ability to scale up to 1.23MWh, IP65 protection, integrated heating and built-in fire suppression, this system is engineered for reliable performance in demanding UK environments. System Overview Each stack consists of: • 1-4 × 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand. Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Fully Scalable Architecture • Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support

Fogstar Energy 16.1-64.4kWh 51.2V Modular Battery Stack  #12: Fog/En/Stack Fogstar Battery stack Datasheet Fogstar Battery stack Installation manual Scalable Commercial LiFePO₄ Energy Storage | IP65 | Integrated Heating & Fire Suppression The Fogstar Energy Modular Battery Stack is a high-capacity, low-voltage (51.2V) LiFePO₄ energy storage system designed for residential, commercial and light industrial applications. Built from 1-4 X 16.1kWh battery modules, and managed by a single top-mounted control unit that operates the system as one fully integrated solution. With the ability to scale up to 1.23MWh, IP65 protection, integrated heating and built-in fire suppression, this system is engineered for reliable performance in demanding UK environments. System Overview Each stack consists of: • 16.1kWh LiFePO₄ battery modules• Integrated top-mounted control unit• Heavy-duty base plate structure• Built-in 350A isolation breaker Once assembled, the control unit manages all modules as one unified battery system — simplifying commissioning, inverter communication, monitoring and servicing. The modular architecture allows additional stacks to be added at any time, making this solution ideal for phased commercial installs or growing energy demand.   Advanced Integrated BMS A high-performance Battery Management System delivers: • Precise charge & discharge control• Full protection against over/under voltage & temperature• Support for high-power inverter systems• Long-term reliability and system stability Seamless Inverter Integration CAN & RS485 communication enables compatibility with leading inverter brands including: • Victron• LuxPower• Sunsynk• Solis• Voltronic• Voltacon Ideal for hybrid, backup and off-grid applications. Fully Scalable Architecture • 1 × battery = 16.1kWh• Multiple stacks connected in parallel• Scales up to 1.23MWh total capacity Perfect for commercial properties, agricultural sites, workshops, warehouses and large residential installs. IP65-Rated Construction A robust, sealed enclosure protects against dust and moisture, allowing: • Indoor installation• Plant room installation• Outdoor installation (where suitable) Built for real-world environments. Integrated Fire Suppression Heat-activated aerosol fire suppression system provides: • Automatic internal protection• No external maintenance requirements• Enhanced site safety compliance Cold-Weather Ready (Down to –15°C) Integrated battery heating enables: • Safe low-temperature charging• Reliable winter operation• Installation in unheated plant rooms and outbuildings Operating conditions:• Charge: 0–45°C (with heating enabled)• Discharge: –20–45°C JK 2A Active Cell Balancing Continuous active balancing improves: • Cell voltage equalisation• System efficiency• Long-term lifespan• Performance stability under load High Output Performance • 51.2V (48V nominal) low-voltage system• 300A maximum charge & discharge current• Designed to support high-demand inverters• Ideal for backup, peak shaving & off-grid applications Built-In 350A Breaker Integrated breaker allows full system isolation for: • Maintenance• Fault conditions• Emergency shutdown Warranty & Support • 6-Year Manufacturer Warranty• 10 Years UK-Based Customer Support Technical Specifications Specification Details Model FE51.2 Rated Energy16.1 16.1kWh Nominal Voltage 51.2V Operating Voltage Range 43.2V – 57.6V Cycle Life 8,000 cycles @ 91% DOD Max Discharge Current 300A Max Charge Current 300A Working Temperature (Charge) 0–45°C (with heating) Working Temperature (Discharge) –20–45°C Ingress Protection IP65 Communication CAN / RS485 What’s Included The system is supplied with: ✔ Pre-Terminated 95mm² Battery Power Cables Heavy-duty, high-current cables supplied ready terminated for fast installation. Allows: • Direct battery-to-inverter connection• Connection via external DC busbar (where required) ✔ Amphenol-Terminated Battery Interconnect Cables • Secure locking connectors• Low-resistance current transfer• Reliable parallel stack expansion ✔ 1.5m Communication Cable Enables: • CAN / RS485 communication• Inverter control• System monitoring integration Installation Guidance The supplied 95mm² power cables are compatible with most inverter systems. In some installations: • Battery cables may be routed to a DC busbar• Manufacturer-supplied inverter leads may be used for final inverter connection

Fogstar Energy 48V 16.1kWh ECO White Battery (2026 Version)  #12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations. Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands. The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK. Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value. Key Benefits ✔ Fully Assembled – Ready to Install Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution. ✔ Scalable Energy Storage Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems. ✔ Long Lifespan Performance • 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry ✔ Integrated Fire Suppression (2026 Upgrade) An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety. ✔ Cold-Weather Charging to -10°C Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces. ✔ Intelligent Battery Management • Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance. ✔ Seamless Inverter Compatibility Pre-loaded communication protocols support: • Victron• Pylontech• Growatt• Sofar• Solis• Goodwe Includes: 1.5m CAN & RS485 communication for smooth integration. 1.5m 50mm battery cable terminated with M8 ring lugs ✔ Real-Time Monitoring Integrated LCD touchscreen display provides live system data and operational feedback. ✔ Commercial-Grade Value High capacity, premium components, and advanced safety features at an exceptional cost per kWh. Technical Specifications Specification Details Rated Energy 16.1kWh Cell Configuration 1P16S Cell Type 3.2V 314Ah Grade A LiFePO₄ Nominal Voltage 51.2V Operating Voltage Range 42V – 58.2V Capacity 314Ah Cycle Life 8000 cycles @ 25°C, 50A (91% DOD) Charge Temperature -10°C to 40°C Discharge Temperature -20°C to 40°C Rated Charge Current 100A Rated Discharge Current 200A Maximum Discharge Current 200A Battery Management System Seplos 200A BMS Active Balancer JK 2A Weight 119.5kg ±3kg Dimensions (mm) 898.5 (H) × 415 (L) × 260 (W) Communication CAN & RS485 Pre-Loaded Protocols Victron, Sofar, Pylontech, Growatt, Solis, Goodwe Warranty 6 Years Customer Support 10 Years Ideal For • Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity Why Buy From ITS Technologies? At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence. Need help designing your system? Speak to our technical team today.

GSE In-Roof Portrait Top Left Corner Flashing 30mm - Black #2: GSE-ART106401   GSE Data Sheet GSE Installation Manual  GSE Insurance Certificate Warranty   The GSE In-Roof Portrait Top Left Corner Flashing 30mm (Black) is a precision-manufactured mounting accessory designed for use within the GSE In-Roof solar mounting system. It provides a secure, weatherproof finish at the top left corner of portrait-oriented in-roof solar arrays, ensuring long-term roof protection and a professional integrated appearance. This component is essential for completing a flush, roof-integrated PV installation using 30mm framed solar panels. Designed for In-Roof Solar Integration Optimised for Portrait Module Layouts Specifically engineered for portrait-configured solar panels, this top left corner flashing ensures proper water drainage and structural continuity at the edge of the array. 30mm Frame Compatibility Designed for use with 30mm framed modules, providing accurate alignment and reliable installation within the GSE system. Seamless GSE System Compatibility Fully Integrated with GSE In-Roof Mounting This flashing forms part of the complete GSE In-Roof System, enabling installers to create a clean, flush solar array without traditional above-roof mounting rails. Proven European Market Adoption The GSE In-Roof system has secured over 60% market share in residential installations in France and continues expanding internationally due to its ease of installation, cost efficiency, and dependable performance. Durable, Lightweight & Installer-Friendly Lightweight Construction With a weight of just 0.5 kg, this component is easy to handle and position during installation, helping streamline on-site work. Professional Black Finish The durable black finish blends seamlessly with solar modules and roofing materials, delivering a modern, discreet aesthetic. Technical Specifications General Information Product Name: In-Roof Portrait Top Left Corner Flashing 30mm Mounting Type: In-Roof PV System Component System Compatibility: GSE In-Roof Mounting System Physical Details Supplier Part Number: ART106401 Weight: 0.5 kg Colour: Black Why Choose GSE In-Roof Flashing Components? ✔ Designed for integrated, in-roof solar installations✔ Ensures effective weatherproofing at array edges✔ Compatible with 30mm framed portrait solar panels✔ Lightweight and easy to install✔ Part of a widely adopted European in-roof mounting solution For technical queries or to report any product information issues, please contact our team via the website contact form.

GSE In-Roof Portrait Top Junction Flashing 30mm - Black #2: GSE-ART106394  3: ART106394 Minimum order - Available only with other mounting items  GSE Data Sheet GSE Installation Manual  GSE Insurance Certificate Warranty   GSE In-Roof Portrait Top Junction Flashing 30mm – Black The GSE In-Roof Portrait Top Junction Flashing 30mm (Black) is a precision-engineered mounting component designed for use within the GSE In-Roof photovoltaic mounting system. It ensures a secure, watertight finish at the top junction of portrait-oriented in-roof solar arrays, helping maintain long-term roof integrity and system durability. This component is essential for creating a clean, professional integrated solar installation. Designed for In-Roof Solar Installations Optimised for Portrait Panel Layouts Specifically developed for portrait-oriented PV modules, this top junction flashing ensures proper water management and seamless alignment between adjoining panels. 30mm System Compatibility Engineered for use with 30mm frame solar modules within the GSE in-roof system, providing accurate fit and secure integration. Seamless GSE System Integration Fully Compatible with GSE In-Roof Mounting This flashing integrates directly into the GSE In-Roof System, allowing installers to create flush, roof-integrated solar arrays without the need for traditional above-roof mounting rails. Proven European Market Leader The GSE In-Roof System holds over 60% market share in residential installations in France and continues to grow in the UK due to its cost-effective design, ease of installation, and reliable performance. Durable & Installer-Friendly Design Lightweight and Easy to Handle With a weight of just 0.56 kg, this component is easy to transport and position during installation. Professional Black Finish The black finish ensures a consistent aesthetic with solar modules and roofing materials, delivering a sleek, integrated appearance. Technical Specifications General Information Product Name: In-Roof Portrait Top Junction Flashing 30mm Mounting Type: In-Roof PV System Component System Compatibility: GSE In-Roof Mounting System Physical Details Supplier Part Number: ART106394 Weight: 0.56 kg Colour: Black Why Choose GSE In-Roof Flashing Components? ✔ Designed specifically for integrated solar roof systems✔ Ensures effective weatherproofing and junction protection✔ Compatible with 30mm framed portrait solar panels✔ Lightweight and easy to install✔ Part of a widely adopted European in-roof mounting solution

Important Notice (This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here. 30 X 470W AIKO Solar Panel, 14kW System with Solis 12kW Hybrid 3ph Inverter & 30.7kWh Pylontech H-Force Lithium Batteries  Our customer in Grimsby, upgraded their site with 30 × 470W AIKO solar panels, paired with a Solis 12kW hybrid inverter and Pylontech H-Force lithium batteries. This setup provides a reliable, high-capacity solar storage solution with smart energy management, designed for maximising self-consumption and reducing grid reliance. System Specification Solar Panels 30 × 470W AIKO Solar Panels Sleek, modern design High efficiency for optimal energy generation Inverter Solis 12kW Hybrid Inverter Smart energy management for solar storage and grid integration Ideal for pairing with large lithium battery banks Batteries Pylontech H-Force  Total storage: 30.7kWh Reliable, scalable, and long-lasting lithium battery technology Key Benefits ⚡ High-Capacity Solar & Storage – Suitable for medium to large homes 💷 Energy Cost Savings – Store excess solar power and reduce reliance on the grid 🔋 Reliable Lithium Batteries – H-Force batteries offer long lifespan and consistent performance 🌍 UK-Optimised Installation – Designed for Grimsby location and similar climates 🔧 Expandable System – Easily add more panels or batteries in the future Why Choose This Solis & AIKO System? High-performance solar panels with cell-level optimisation Powerful hybrid inverter ensures seamless solar storage and consumption High-capacity lithium battery storage for daytime energy use or backup Professional UK installation for maximum efficiency and reliability   Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.  

Enphase IQ7 Plus Microinverter #1: EN-IQ7PLUS-72-M-INT-3PH     Enphase IQ7+ Datasheet  Enphase IQ7+ Installation Manual Enphase IQ7 Plus Microinverter – 60 & 72 Cell (3-Phase) Rated Module Power: Up to 440WGrid Connection: 230V / 400V, Three Phase Product Overview The Enphase IQ7 Plus Microinverter is a high-performance, seventh-generation microinverter designed for 60-cell and 72-cell PV modules in residential and small commercial solar installations. Built on Enphase’s proven IQ platform, it delivers exceptional reliability, advanced grid support functionality, and module-level optimisation for maximum energy harvest. Each microinverter operates independently, ensuring the system continues to generate power even if individual modules are shaded, soiled, or offline. This makes the IQ7 Plus ideal for complex rooftops and performance-critical installations. Key Benefits High-performance variant of the Enphase seventh-generation IQ platform Smart-grid ready for compliance with modern UK and European grid requirements Module-level MPPT improves energy yield across the entire PV array Lightweight, compact design for fast and efficient installation Two-wire cabling reduces installation time and on-site complexity Double-insulated enclosure (Protection Class II) for enhanced electrical safety Modular system architecture allows simple system expansion at any time High system resilience — array continues operating if a single module or microinverter is affected Seamless integration with Enphase Gateway-S and Enphase App for monitoring and analytics Monitoring & System Integration The IQ7 Plus integrates directly with the Enphase Gateway-S™ and Enphase cloud-based monitoring platform. Installers and system owners gain real-time visibility of module-level performance, system health, and energy production via the Enphase mobile and web applications. Electrical & Technical Specifications Common module pairings: 295W to 460W+ Compatible module formats: 60-cell / 120 half-cell 72-cell / 144 half-cell Peak output power: 366 VA Operating voltage range: 18V – 58V Grid connection: 230V / 400V AC, three-phase Enclosure rating: IP67 (suitable for outdoor installation) Reliability & Safety Designed for long-term performance in demanding environments, the IQ7 Plus features a fully sealed, corrosion-resistant housing and advanced thermal management. The microinverter meets stringent international safety and grid compliance standards when installed in accordance with Enphase guidelines.

535W N-Type TOPCon MBB Bifacial Double-Glass Solar Panel (Traceable)  #2: JAM60D-42-535-LB-TS-BF  - Double Glass Bifacial Solar Panel JA Solar 535W Datasheet JA Solar 535W Declaration of Conformity JA Solar 535W Installation Manual JA Solar 535W Ltd Warranty Minimum order for this panel: 6 panels. For orders with no minimum please visit our Single Panels page. Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. All installations must comply with local wiring regulations and applicable standards. ITS Technologies will not accept liability for system malfunctions caused by incorrect installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. Due to the large panel dimensions and pallet slat spacing, delivery requires a forklift truck or manpower on site for unloading. 535W N-Type TOPCon MBB Bifacial Double-Glass Solar Panel (Traceable) The 535W N-type TOPCon bifacial solar panel delivers exceptional performance, long-term reliability, and improved energy yields for commercial and large-scale rooftop or ground-mount PV systems. Built using advanced N-type TOPCon multi-busbar cell technology, this module achieves higher efficiency, lower degradation, and superior performance in challenging environmental conditions. Its double-glass bifacial design enables additional rear-side energy generation from reflected light, improving overall system output and lowering the levelised cost of energy (LCOE). The robust black-frame construction and MC4 connectors ensure compatibility with modern mounting systems and inverters. High-Efficiency Bifacial Performance 535W rated power output for high-density PV installations 22.9% module efficiency for maximum energy yield per square metre Bifacial energy gain captures reflected and diffused light N-type TOPCon cell technology with extremely low LID Improved weak-light performance for consistent generation throughout the day Favourable temperature coefficient for stable output in high temperatures Durable Double-Glass Construction Double-glass architecture enhances mechanical strength and fire resistance Multi-busbar (MBB) design improves current collection and reliability Black aluminium frame for durability and clean system aesthetics MC4 connectors for fast, secure installation 1200mm landscape cable included for flexible string design Electrical & Mechanical Specifications Rated Power Output: 535W Module Efficiency: 22.9% Cell Type: N-type TOPCon, 60-cell Bifacial: Yes Width: 1,134 mm Height: 2,063 mm Frame Colour: Black Connector Type: MC4 Product Code: JAM60D-42-535-LB-TS-BF Long-Term Warranty Protection 12-year product warranty 30-year linear power output warranty Designed for long service life and minimal performance degradation

Enphase IQ Battery & 8 × IQ7PLUS Microinverter Self-Consumption Package 1: EN-IQ-BATT-IQ7PACK-8 Enphase IQ Datasheet Enphase IQ G100 Certificate Enphase IQ Battery & 8 × IQ7PLUS Microinverter Self-Consumption Package The Enphase IQ Battery & IQ7PLUS Microinverter Package is a complete, AC-coupled solar and storage solution designed for residential self-consumption and energy resilience. Combining Enphase’s modular IQ Battery 5P with 8 IQ7PLUS microinverters, this package enables efficient solar generation, intelligent energy storage, and seamless system monitoring within the Enphase Energy System. This special offer bundle includes all the essential Enphase components required to connect 8 solar panels in portrait orientation, providing a streamlined path to installation and commissioning for certified Enphase installers. What’s Included in This Package This complete system bundle consists of: 1 × Enphase IQ Battery 5P (EN-IQ-BATTERY-5P)All-in-one AC-coupled battery for residential energy storage 8 × Enphase IQ7PLUS Microinverters (EN-IQ7PLUS-72-M-INT)Suitable for 60- and 72-cell modules, with integrated MC4 connectorsCompatible with 230 V and 400 V AC systems 1 × Enphase Envoy-S Metered Multiphase (ENV-S-EM-230)Includes 2 × CTs for system monitoring and energy measurement 8 × Enphase Q Cable – 1 Phase, 1.3 m, Portrait (EN-Q-25-10-1) 1 × Enphase Communications Kit 2 (EN-IQ-COMMS-KIT) 1 × Enphase Q-Cable Round AC Branch Terminator (EN-Q-TERM-R) Integrated Solar Generation & Energy Storage This package delivers a fully AC-coupled Enphase Energy System, allowing solar generation and battery storage to operate independently at module level. Each IQ7PLUS microinverter optimises its connected panel individually, improving overall system performance, resilience and fault tolerance. The IQ Battery 5P stores excess solar energy generated during the day and makes it available for evening use, helping homeowners increase self-consumption and reduce reliance on the grid. Intelligent Monitoring & Control System performance is monitored and managed through the Enphase Envoy-S Metered Gateway, providing detailed insight into production, consumption and battery operation. Data is accessible via the Enphase App, enabling real-time monitoring, historical analysis and system diagnostics. Installation Layout & Compatibility Notes Designed to connect 8 solar panels in portrait layout All core Enphase components required for connection are included, with allowance for minor layout deviation Lifting handles for the IQ Battery are not included Installer Certification Requirement Important:Installation and commissioning of this package must be carried out by a certified Enphase installer. Uncertified installers will be unable to complete system commissioning or activate monitoring and warranty features. Ideal Applications Residential self-consumption solar systems Homes seeking modular battery storage Enphase microinverter-based PV installations Customers wanting a complete, pre-configured Enphase package

Enphase IQ Battery & 10 × IQ7PLUS Microinverter Self-Consumption Package 1: EN-IQ-BATT-IQ7PACK-10  Enphase IQ Datasheet Enphase IQ G100 Certificate Enphase IQ Battery & 10 × IQ7PLUS Microinverter Self-Consumption Package The Enphase IQ Battery & IQ7PLUS Microinverter Package is a complete, AC-coupled solar and storage solution designed for residential self-consumption and energy resilience. Combining Enphase’s modular IQ Battery 5P with 10 IQ7PLUS microinverters, this package enables efficient solar generation, intelligent energy storage, and seamless system monitoring within the Enphase Energy System. This special offer bundle includes all the essential Enphase components required to connect 10 solar panels in portrait orientation, providing a streamlined path to installation and commissioning for certified Enphase installers. What’s Included in This Package This complete system bundle consists of: 1 × Enphase IQ Battery 5P (EN-IQ-BATTERY-5P)All-in-one AC-coupled battery for residential energy storage 10 × Enphase IQ7PLUS Microinverters (EN-IQ7PLUS-72-M-INT)Suitable for 60- and 72-cell modules, with integrated MC4 connectorsCompatible with 230 V and 400 V AC systems 1 × Enphase Envoy-S Metered Multiphase (ENV-S-EM-230)Includes 2 × CTs for system monitoring and energy measurement 10 × Enphase Q Cable – 1 Phase, 1.3 m, Portrait (EN-Q-25-10-1) 1 × Enphase Communications Kit 2 (EN-IQ-COMMS-KIT) 1 × Enphase Q-Cable Round AC Branch Terminator (EN-Q-TERM-R) Integrated Solar Generation & Energy Storage This package delivers a fully AC-coupled Enphase Energy System, allowing solar generation and battery storage to operate independently at module level. Each IQ7PLUS microinverter optimises its connected panel individually, improving overall system performance, resilience and fault tolerance. The IQ Battery 5P stores excess solar energy generated during the day and makes it available for evening use, helping homeowners increase self-consumption and reduce reliance on the grid. Intelligent Monitoring & Control System performance is monitored and managed through the Enphase Envoy-S Metered Gateway, providing detailed insight into production, consumption and battery operation. Data is accessible via the Enphase App, enabling real-time monitoring, historical analysis and system diagnostics. Installation Layout & Compatibility Notes Designed to connect 10 solar panels in portrait layout All core Enphase components required for connection are included, with allowance for minor layout deviation Lifting handles for the IQ Battery are not included Installer Certification Requirement Important:Installation and commissioning of this package must be carried out by a certified Enphase installer. Uncertified installers will be unable to complete system commissioning or activate monitoring and warranty features. Ideal Applications Residential self-consumption solar systems Homes seeking modular battery storage Enphase microinverter-based PV installations Customers wanting a complete, pre-configured Enphase package

Victron 600 Amp DC bus bar, 8 terminal, tin plated copper, with ABS plastic cover #17: VBB160080010 Victron 600A Busbar Data Sheet  To view our full range of Victron products visit our main Victron page here Standalone 600A DC Busbar (70V DC Rated) High-current standalone DC busbar rated at 600 A and 70 V DC, designed for reliable power distribution in battery storage and DC systems. Manufactured from tin-plated copper for excellent conductivity and corrosion resistance, the busbar features stainless steel M10 stud terminals, supplied with M10 nuts, and is finished with a durable black protective cover for enhanced safety.

4.23kW Solar PV System – Swindon Installation Example Important Notice (This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here. High-Performance Solar Panels This example system includes 9 x AIKO 470W solar panels, delivering a total of 4.32kW capacity. Known for their exceptional efficiency, durability, and reliability, AIKO panels ensure consistent energy production—even in partial shading or low-light conditions.   Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.

GSE In-Roof Portrait Top Centre Flashing 30mm - Black #2: GSE-ART106387 3: ART106387 Minimum order - Available only with other mounting items  GSE Data Sheet GSE Installation Manual  GSE Insurance Certificate Warranty   The GSE In-Roof Portrait Top Centre Flashing 30mm (Black) is a precision-engineered component designed for use with the GSE In-Roof photovoltaic mounting system. It provides a clean, weatherproof finish at the top centre of portrait-oriented in-roof solar arrays, ensuring long-term protection and a professional aesthetic. Manufactured as part of the widely adopted GSE integration range, this flashing supports fast installation and reliable system performance. Purpose & Application Designed for In-Roof Solar Integration This flashing component is specifically designed for in-roof PV installations, allowing solar panels to sit flush with the roof covering for a discreet, integrated appearance. Portrait Array Configuration Optimised for portrait-oriented modules, the top centre flashing ensures correct water management and structural continuity at the upper central section of the array. System Compatibility & Benefits Seamless GSE System Integration Fully compatible with the GSE In-Roof System, this component integrates seamlessly with other GSE mounting elements to create a complete, watertight solar installation. Proven Market-Leading Solution The GSE In-Roof System has achieved over 60% market share in residential installations in France and is now widely adopted in the UK due to its simplicity, reliability, and cost-effective design. Installation & Build Quality Installer-Friendly Design Designed for ease of handling and quick installation, helping reduce on-site labour time and installation complexity. Durable Black Finish The black finish ensures a clean, modern appearance that blends seamlessly with solar modules and roofing materials while maintaining long-term durability. Technical Specifications General Information Product Type: In-Roof Portrait Top Centre Flashing System Compatibility: GSE In-Roof PV Mounting System Physical Details Supplier Part Number: ART106387 Length: 1.2 m Weight: 1 kg Colour: Black Why Choose GSE In-Roof Flashing Components? ✔ Designed specifically for in-roof solar installations✔ Ensures effective weatherproofing and water drainage✔ Seamless compatibility with the GSE In-Roof System✔ Proven solution with strong European market adoption✔ Clean, integrated finish for modern PV arrays

Solis Meter 3-Phase Eastron V2 with CTs (SDM630MCT V2) #2: SOL-METER-3PH-EASTRON Eastron Digital Meter User Manual Eastron Digital Meter Installation Guide Solis Meter 3-Phase Eastron V2 with CTs (SDM630MCT V2) The Solis Eastron SDM630MCT V2 is a three-phase, CT-operated MID energy meter designed for accurate monitoring of commercial and industrial solar installations. Suitable for Solis three-phase hybrid and grid-tied inverters above 12kW (above 120A), this meter provides reliable bi-directional energy measurement for import and export applications. The meter operates using external current transformers and supports both 1A and 5A CT inputs. Supplied with 3 × 300A CTs, it offers a wide operating range and is ideal for higher-capacity three-phase systems. The unit requires an auxiliary power supply (AC or DC) to operate and can alternatively be powered directly from the monitored supply where appropriate. Comprehensive Energy & Power Monitoring The SDM630MCT V2 measures and displays a full range of electrical parameters across single-phase and three-phase systems, including 1p2w, 3p3w, and 3p4w supply configurations. Energy is measured in both active and reactive formats, enabling precise system performance analysis and compliance monitoring. Measured parameters include: Line voltage and total harmonic distortion (THD%) for all phases Line frequency Phase currents, current demand and current THD% Active, reactive and apparent power (kW, kVAr, kVA) Power factor and maximum demand values Active energy imported and exported (kWh) Reactive energy imported and exported (kVArh) Maximum demand can be measured over configurable periods of up to 60 minutes, allowing detailed load profiling and system optimisation. Communication, Outputs & Integration Built-in communication interfaces provide seamless integration with Solis inverters, energy management systems, and BMS platforms. The meter includes RS485 Modbus RTU communication for remote monitoring and data acquisition, as well as dual pulse outputs for real-time energy indication. Key communication features: RS485 Modbus RTU output for remote monitoring Two configurable pulse outputs Password-protected configuration and setup screens CT ratios are fully configurable, supporting a wide range of primary currents while maintaining high accuracy across installations. Installation & Compliance The SDM630MCT V2 is DIN-rail mounted (35mm) and designed for fast, clean installation in commercial distribution boards. Configuration is secured via password protection to prevent unauthorised changes. This meter has been assessed and certified to meet the requirements of EU Directive 2014/32/EU (MID), making it suitable for metering applications where regulatory compliance is required. The instrument traceable number is 0120/SGS0703. The unit is also ETL listed by Intertek, providing additional assurance of safety and performance. Key Specifications at a Glance Three-phase CT-operated energy meter Supplied with 3 × 300A current transformers Supports 1A / 5A CT inputs MID approved (EU 2014/32/EU) ETL listed by Intertek Bi-directional energy measurement (import & export) RS485 Modbus RTU communication Dual pulse outputs DIN-rail mounting (35mm) Better than Class 1 / Class B accuracy Auxiliary AC or DC power supply required  

Solis S6 80kW Three-Phase Commercial Solar Inverter (8 MPPT) #2: SOL-S6-GC80K  Solis S6 80kW Datasheet Solis S6 80kW Manual Solis S6 80kW Certificate of Conformity Solis S6 80kW Three-Phase Commercial Solar Inverter (8 MPPT) The Solis S6-GC80K is a high-performance three-phase grid-tied inverter engineered for commercial and light-industrial solar PV installations. Built on the Series 6 commercial platform, it combines excellent conversion efficiency, flexible MPPT architecture and advanced safety features to deliver reliable, long-term performance across complex rooftops and decentralised PV systems. With high DC oversizing capability and intelligent monitoring as standard, the S6-GC80K is an ideal solution for businesses seeking maximum energy yield and operational confidence. Commercial-Grade Power Performance Designed for demanding commercial environments, the Solis S6-GC80K supports up to 120 kW of PV input power while delivering stable three-phase AC output. Its ultra-low start-up voltage enables earlier daily generation and improved energy harvest throughout the year, even in low-irradiance conditions common in the UK. Flexible MPPT Design for Complex Arrays The inverter features 8 independent MPPTs with a total of 16 string inputs, allowing highly flexible string layouts. With high current capability per string, it supports modern high-power PV modules and performs optimally on installations with multiple orientations, roof pitches or partial shading. Integrated Safety & Electrical Protection Comprehensive safety is built in as standard. The S6-GC80K includes AFCI (DC arc-fault circuit protection), an integrated DC switch, DC reverse-polarity protection and Type II surge protection on both DC and AC sides—helping to reduce fire risk and safeguard system components over the long term. Smart Monitoring & Remote Management The inverter integrates seamlessly with SolisCloud, providing real-time system monitoring, Smart String I-V Curve Diagnosis and remote firmware upgrades. These intelligent tools enable proactive fault detection, simplified maintenance and improved uptime across commercial solar portfolios. Commercial Reliability & Warranty Support Engineered for continuous commercial operation, the Solis S6-GC80K is supplied with a 5-year standard manufacturer warranty, with extension options available up to 20 years to support long-term asset protection and investor confidence. Key Technical Specifications • Rated AC Output Power: 80,000 W• Maximum PV DC Power: 120 kW• MPPT Configuration: 8 MPPTs, 16 string inputs• Maximum String Current: 18 / 21 A• MPPT Voltage Range: 180 V – 1100 V• Phases: Three-phase• Integrated Protections: AFCI, DC switch, DC reverse-polarity, Type II SPD (DC & AC)• Monitoring: SolisCloud with Smart String I-V Curve Diagnosis• Warranty: 5 years standard (extendable up to 20 years)

Solis S6 110kW Three-Phase Commercial Solar Inverter (10 MPPT) #2: SOL-S6-GC110K Solis S6 110kW Datasheet Solis S6 110kW Manual Solis S6 110kW Certificate of Conformity Solis S6 110kW Three-Phase Commercial Solar Inverter (10 MPPT) The Solis S6-GC110K is a high-efficiency three-phase grid-tied inverter designed for large commercial and industrial PV installations. Built on the Series 6 commercial platform, it delivers exceptional flexibility, robust safety features and intelligent monitoring—making it ideal for complex rooftops and decentralised solar arrays. With advanced MPPT architecture and high DC oversizing capability, the S6-GC110K maximises energy yield while reducing system design constraints and balance-of-system costs. High-Power Commercial Performance Engineered for demanding commercial environments, the Solis S6-GC110K supports up to 165 kW of PV input power while delivering stable three-phase AC output. Its ultra-low start-up voltage enables earlier generation and longer daily operating windows, improving annual energy production across UK conditions. Flexible MPPT Design for Complex PV Arrays Featuring 10 independent MPPTs with a total of 20 string inputs, the inverter enables highly flexible string configurations. With high input current capability per string, it supports modern high-power PV modules and is well suited to installations with varying orientations, pitches or partial shading. Integrated Safety & Electrical Protection Comprehensive safety is built in as standard. The inverter includes AFCI (DC arc-fault circuit protection), an integrated DC switch, DC reverse-polarity protection and Type II surge protection on both DC and AC sides—helping to mitigate fire risks and protect long-term system integrity. Smart Monitoring & Remote Management The S6-GC110K integrates seamlessly with SolisCloud, providing real-time performance monitoring, Smart String I-V Curve Diagnosis and remote firmware upgrades. These intelligent tools allow installers and asset owners to identify issues early, reduce downtime and optimise system performance across large commercial portfolios. Commercial-Grade Reliability & Warranty Designed for continuous operation in commercial environments, the Solis S6-GC110K is backed by a 5-year standard manufacturer warranty, with extension options available up to 20 years for long-term asset protection and peace of mind. Key Technical Specifications • Rated AC Output Power: 110,000 W• Maximum PV DC Power: 165 kW• MPPT Configuration: 10 MPPTs, 20 string inputs• Maximum String Current: 18 / 21 A• MPPT Voltage Range: 180 V – 1100 V• Phases: Three-phase• Integrated Protections: AFCI, DC switch, DC reverse-polarity, Type II SPD (DC & AC)• Monitoring: SolisCloud with Smart String I-V Curve Diagnosis• Warranty: 5 years standard (extendable up to 20 years)

Solis S6 125kW Three-Phase Commercial Solar Inverter (10 MPPT) #2: SOL-S6-GC125K Solis S6 125kW Datasheet Solis S6 125kW Manual Solis S6 125kW Certificate of Conformity Solis 125kW S6 Three-Phase Commercial Solar Inverter (10 MPPT) The Solis S6-GC125K is a high-performance three-phase grid-tied inverter engineered for large-scale commercial and industrial PV installations. Delivering outstanding power density, advanced safety features and intelligent monitoring, it is ideal for complex rooftops and decentralised system designs requiring maximum flexibility and reliability. Built on Solis’ Series 6 platform, the S6-GC125K combines high DC oversizing capability with multi-MPPT architecture to maximise energy yield while reducing balance-of-system costs. High-Power Commercial Performance Designed for demanding commercial environments, the Solis S6-GC125K supports up to 165 kW of PV input power and delivers stable three-phase AC output with excellent conversion efficiency. The wide MPPT voltage range and ultra-low start-up voltage ensure early morning generation and extended operating hours throughout the year. Advanced MPPT Design for Complex Arrays With 10 independent MPPTs and dual string inputs per tracker, this inverter enables highly flexible string layouts. It is ideally suited to installations with varying orientations, shading profiles or mixed module strings, maximising yield across complex commercial rooftops. Integrated Safety & Protection The S6-GC125K incorporates comprehensive protection as standard, including integrated AFCI (DC arc-fault circuit protection), DC switch, reverse-polarity protection and Type II surge protection on both DC and AC sides. These features reduce fire risk, improve system safety and ensure long-term operational reliability. Smart Monitoring & Diagnostics Intelligent monitoring tools such as Smart I-V Curve Diagnosis enable proactive fault detection and performance optimisation. The inverter supports PLC, GPRS and Wi-Fi communication and integrates seamlessly with SolisCloud for real-time monitoring, remote firmware updates and fleet management. Commercial-Ready Reliability Engineered for continuous operation in commercial environments, the Solis S6-GC125K is backed by a 5-year standard warranty, extendable up to 20 years for long-term asset protection and peace of mind. Key Technical Specifications • Rated AC Output Power: 125,000 W• Maximum AC Output Power: 121 kW• Maximum PV DC Power: 165 kW• MPPT Configuration: 10 MPPTs, 2 strings per MPPT (16 A per string)• MPPT Voltage Range: 195 V – 1100 V• Phases: Three-phase• Integrated Protections: AFCI, DC switch, DC reverse-polarity, Type II SPD (DC & AC)• Monitoring: Smart I-V Curve Diagnosis, SolisCloud• Communications: PLC, GPRS, Wi-Fi• Warranty: 5 years standard (extendable up to 20 years)

Solis inverter S6 8.0kW Triple MPPT - Single Phase with DC #2: SOL-8.0-S6-TT-DC Solis Warranty   The Solis SOL-8.0-S6-TT-DC PV Inverter is a powerful and efficient single-phase inverter designed for high-capacity residential and light commercial solar PV systems. With a rated output of 8,000W, it delivers outstanding energy conversion, advanced MPPT control, and flexible system design for demanding UK solar installations. Developed by Solis, one of the world’s leading inverter manufacturers, this model combines cutting-edge research with proven field reliability. Advanced Engineering & Global Expertise Designed by a World-Class R&D Team Solis inverters are engineered by an international team of professors and specialists from 8 countries, ensuring world-class product design, durability, and performance. Proven Quality & Reliability Praised globally for high quality and long-term reliability, Solis inverters are trusted in residential, commercial, and utility-scale projects worldwide. High Performance & Energy Optimisation Exceptional Conversion Efficiency With a Euro efficiency of 97.3% and peak efficiencies exceeding 97%, this inverter ensures maximum usable energy from your solar array. Precise MPPT Algorithm The advanced MPPT control dynamically tracks the optimal operating point of your PV modules, maximising energy harvest throughout the day in changing UK weather conditions. Ultra-Wide Voltage Range Supporting a wide MPPT voltage range from 90V to 520V, this inverter offers excellent flexibility for array design and improved low-light performance. Installation Flexibility & System Design Triple DC Input for Complex Layouts Featuring 3 DC inputs and 2 MPPTs, the SOL-8.0-S6-TT-DC allows for multiple string configurations, ideal for roofs with different orientations or shading zones. Integrated Safety & Simplicity The built-in DC switch enhances system safety and simplifies maintenance, while MC4 connectors ensure secure and reliable connections. Technical Specifications Electrical Ratings Rated Power: 8,000 W Max DC Power: 10,400 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 8,000 W Max Input Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 90 V MPPT Voltage Range: 90 – 520 V Max DC Current: 37.5 A System Configuration Phases: Single Phase MPPT Quantity: 2 Max DC Inputs: 3 Has Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 4 Transformer: None Efficiency & Physical Details Euro Efficiency: 97.3% Weight: 12.5 kg Warranty: 5 Years Why Choose the Solis SOL-8.0-S6-TT-DC? ✔ Ideal for large residential and light commercial systems✔ High efficiency with precise MPPT tracking✔ Flexible design with triple DC input✔ Wide voltage range for superior performance✔ Backed by world-class R&D and global reliability✔ Excellent performance-to-cost ratio  

Fox ESS 3.6kW F Series (G3) 1PH Dual Tracker PV Inverter #2 FE-F3600-G3 FE-F3600-G3 Datasheet FE-F3600 User Manual The FOX ESS F3600 G3 PV Inverter is a high-efficiency, single-phase solar inverter designed for residential and small commercial solar PV systems. With a rated output of 3,600W, it offers an excellent balance of performance, reliability, and future-proof energy storage compatibility. Part of the advanced Fox ESS F Series (3.0–6.0kW), the F3600 G3 features dual MPPT tracking, IP65 protection, and smart monitoring, making it ideal for modern UK solar installations. Key Performance Features High Efficiency Energy Conversion With up to 97.4% maximum efficiency and 96.8% Euro efficiency, the F3600 G3 ensures minimal energy loss and optimal power generation throughout the day, even in variable UK weather conditions. Dual MPPT for Greater Flexibility Equipped with two independent MPPT trackers, this inverter allows different roof orientations or partial shading to be managed efficiently, increasing total system yield and design flexibility. Battery Ready for Future Expansion The inverter is battery ready, allowing easy integration with Fox ESS energy storage systems when paired with a compatible charge controller, protecting your investment as your energy needs evolve. Installation & Build Quality Fast and Simple Installation Designed with a plug-and-play configuration, the F3600 G3 enables quick setup and commissioning, reducing installation time and labour costs. IP65 Outdoor Rated Protection With its IP65-rated enclosure, the inverter is fully protected against dust and water, making it suitable for outdoor installation across the UK’s varied climate. Smart Monitoring & Control Remote System Access Track your solar performance anytime via smartphone app or web portal. Monitor real-time production, system health, and historical data for complete control and peace of mind. Technical Specifications Electrical Ratings Rated Power: 3,600 W Max DC Power: 3,900 W Max AC Power (5 min): 3,000 W Surge AC Power (1 sec): 3,300 W Max Input Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V MPPT Voltage Range: 120 – 600 V Max DC Current: 25 A System Configuration Phases: Single Phase MPPT Quantity: 2 Max DC Inputs: 2 Has Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 2 Transformer: None Efficiency & Physical Details Maximum Efficiency: 97.4% Euro Efficiency: 96.8% Weight: 9.5 kg Warranty: 5 Years Why Choose the FOX ESS F3600 G3? ✔ Ideal for medium-sized residential solar systems✔ Dual MPPT for higher energy yield✔ Battery-ready for future storage upgrades✔ Compact, lightweight and easy to install✔ IP65 rated for outdoor durability✔ Smart monitoring via app and web

Fox ESS 3kW F Series (G3) 1PH Dual Tracker PV Inverter #2 FE-F3000-G3 FE-F3000-G3 Datasheet FE-F3000 User Manual The FOX ESS F3000 G3 PV Inverter is a high-performance, single-phase solar inverter designed for residential and small commercial solar systems. With a rated output of 3,000W, dual MPPT tracking and battery-ready capability, it offers excellent flexibility, efficiency, and long-term reliability for modern solar installations. Part of the Fox ESS F Series range (3.0–6.0kW), this inverter is engineered for easy upgrades and seamless integration with energy storage when paired with a Fox ESS charge controller. Key Performance Features High Efficiency & Power Optimisation The F3000 G3 delivers up to 97.4% maximum efficiency, ensuring you extract the most energy possible from your PV system.With a low start-up voltage and a wide MPPT voltage range, it performs exceptionally well even in low-light UK conditions. Dual MPPT for Greater Yield Featuring two independent MPPT trackers, this inverter allows multiple roof orientations or shading zones to operate efficiently, improving overall system yield and design flexibility. Battery Ready for Future Expansion Designed to be storage-ready, the F3000 G3 allows easy future upgrades to battery systems without replacing the inverter – making it a future-proof investment. Installation & Durability Fast and Simple Installation The plug-and-play design enables quick installation and commissioning, reducing labour time and project costs. IP65 Outdoor Rated With a robust IP65-rated enclosure, the inverter is suitable for outdoor installation, offering protection against dust, rain, and harsh environmental conditions common across the UK. Smart Monitoring & Control Remote System Monitoring Monitor your solar performance anytime via smartphone app or web portal. View energy production, system health, and performance trends in real time for complete peace of mind. Technical Specifications Electrical Ratings Rated Power: 3,000 W Max AC Power (5 min): 3,000 W Surge AC Power (1 sec): 3,300 W Max DC Power: 3,900 W Max Input Voltage: 600 V DC Startup Voltage: 120 V DC Shutdown Voltage: 601 V MPPT Voltage Range: 120 – 600 V Max DC Current: 25 A System Configuration Phases: Single Phase MPPT Quantity: 2 Max DC Inputs: 2 Has Integrated DC Switch: Yes DC Fuses: No Connector Type: MC4 Included Connectors: 2 Transformer: None Efficiency & Build Maximum Efficiency: 97.4% Euro Efficiency: 96.8% Weight: 9.5 kg Warranty: 5 Years Why Choose the FOX ESS F3000 G3? ✔ Optimised for UK solar conditions✔ Battery-ready for future storage integration✔ Compact, lightweight and easy to install✔ Dual MPPT for higher energy yield✔ IP65 rated for outdoor durability✔ Smart monitoring included

460W JA Solar N-Type Double Glass Monofacial Solar Panel #1: JAM54D-41-460-LR-TS-AB-MC4  Minimum order for this panel: 6 panels. For orders with no minimum please visit our Single Panels page. Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here]. Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here]. Designed for high-performance residential and commercial PV systems, this 460W N-type double-glass monofacial solar panel combines advanced cell technology with a premium all-black aesthetic. Featuring traceable manufacturing and factory-fitted MC4 connectors, it delivers excellent efficiency, durability, and long-term energy yield. Advanced N-Type MBB Cell Technology Built using the latest multi-busbar (MBB) N-type half-cell architecture, this module achieves higher output power with reduced electrical losses. N-type technology significantly lowers Light Induced Degradation (LID), ensuring stronger long-term performance compared to conventional P-type panels. Higher energy yield across the system lifetime Minimal LID for sustained power output Improved temperature coefficient for stable performance in warmer conditions Superior Low-Light & All-Weather Performance The optimised cell design enhances light absorption and current collection, delivering better performance in low-light conditions such as early mornings, evenings, and overcast UK weather. This translates into more consistent daily generation and improved overall Levelised Cost of Energy (LCOE). Durable Double-Glass Construction The dual-glass design improves mechanical strength, fire resistance, and environmental durability, making the panel well suited for long-term rooftop installations. The monofacial double-glass build also enhances module longevity while maintaining a sleek, uniform appearance. Electrical & Mechanical Specifications Rated Power Output: 460W Module Efficiency: 23% Width: 1,134 mm Height: 1,762 mm Connector Type: MC4 Design: All-Black, Double Glass, Monofacial Traceability: Fully traceable module Key Specifications Power & Efficiency Rated Power: 460 W Module Efficiency: 23.0% Designed to maximise energy generation from limited roof space, making it ideal for high-performance residential and commercial installations. Electrical Characteristics VMPP: 33.68 V IMPP: 13.66 A Open Circuit Voltage (Voc): 40.6 V Short Circuit Current (Isc): 14.43 A Temperature Coefficient (Pmax): −0.29% / °C Low temperature coefficient ensures strong performance even during warmer operating conditions. Mechanical Specifications Length: 1,762 mm Width: 1,134 mm Depth: 30 mm Weight: 22 kg Optimised Value & Installation Flexibility With a competitive price per watt, this panel offers excellent value for high-efficiency installations. Its standard dimensions and MC4 connectors ensure compatibility with most modern inverters, optimisers, and mounting systems used in UK residential and commercial solar projects.

Backup Box B1 for 3ph System #1: HUA-BACKUP-BOX-B1 Backup Box Data Sheet Backup Box Manual Backup Box Warranty Huawei Backup Box B1 – Three-Phase Systems Part No: HUA-BACKUP-BOX-B1Category: Energy Storage System Accessory The Huawei Backup Box B1 enables automatic detection and seamless switchover between grid-connected and backup operation, providing reliable backup power for three-phase residential PV and battery storage systems. Designed to work alongside compatible Huawei hybrid inverters, the Backup Box intelligently manages the system’s operating state to ensure continuity of supply during grid outages. How It Works Normal operation: The inverter operates in a grid-tied state Grid outage detected: The Backup Box automatically signals the inverter to switch to off-grid (backup) mode, supplying power to designated backup loads Grid restoration: The system automatically transitions back to grid-tied operation once supply is restored This automated process ensures uninterrupted power to critical loads without manual intervention. Key Benefits Automatic grid failure detection and recovery Seamless transition between grid-tied and off-grid operation Reliable backup power for selected circuits Designed specifically for three-phase residential systems Fully integrated with Huawei inverter architecture

EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management #3: 7613   EcoFlow 1ph Gateway Backup Box EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management EcoFlow Single Phase Gateway – Whole-Home Backup & Energy Management Upgrade your home energy system with the EcoFlow Single Phase Gateway, a high-capacity power management solution designed for seamless whole-home backup. Built to handle up to 100A mains supply, the gateway intelligently manages multiple energy inputs and integrates directly with your main distribution board, enabling a clean, efficient and installer-friendly setup. With an ultra-fast 0 ms switchover time, the EcoFlow Single Phase Gateway ensures uninterrupted power during grid outages, protecting sensitive appliances and maintaining comfort without disruption. Its robust design, wide operating temperature range and silent natural convection cooling make it suitable for demanding residential environments. Key Benefits & Performance • True whole-home backup with support for up to 100A mains• Instant 0 ms switchover for uninterrupted power supply• Designed for direct integration with the main electrical panel• Silent operation with natural convection cooling• Long service life backed by a 15-year manufacturer warranty Connectivity & System Integration • Ethernet, RS485 and CAN communication interfaces• Digital input (DI) and digital output (DO) support• Enables intelligent energy monitoring and system coordination Electrical Specifications • Nominal AC voltage: 220 / 230 / 240 V• Nominal AC current: 100 A• Nominal AC power: 22 / 23 / 24 kW Environmental & Mechanical Specifications • Protection rating: IP54• Operating temperature range: -30°C to +55°C• Cooling method: Natural convection• Noise emission: <30 dB Physical Dimensions & Warranty • Dimensions: 465 × 380 × 160 mm• Weight: 15 kg• Warranty: 15 years This EcoFlow Single Phase Gateway is an ideal choice for homeowners seeking a reliable, future-ready energy management solution that delivers seamless backup power, intelligent control and long-term reliability.

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 9 meters total height. Blades are 8 meters high and 1.7 meters in diameter. They come with a generator rated at 10,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 8 meters total height. Blades are 7 meters high and 1.7 meters in diameter. They come with a generator rated at 5,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties