Solar Batteries

Solis S6 8kW 3PH High Voltage  Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-8.0K-H-EU  Storage Systems - Hybrid Inverter Solis S6 8kW Inverter Data Sheet Solis S6 8kW Inverter Manual & Install Guide Solis S6 8kW Inverter Warranty Solis S6 8kW G100 Certificate   Solis S6 Hybrid Inverter – 8kW, Single Phase The Solis S6 Hybrid Inverter is a high-performance solution for residential and small commercial solar systems. Designed for flexibility, it supports 3 or 4 MPPTs, ensuring maximum solar energy harvest from multiple array orientations. The inverter is compatible with multiple lithium battery brands, providing seamless energy storage integration. With built-in UPS functionality, selected loads can continue to operate during power outages, while features like peak shaving and advanced battery protection enhance operational efficiency and prolong battery life. Note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3-phase Eastron meter for system monitoring. Key Features Integrated MPPTs – 3 or 4 MPPTs to support multiple array orientations High Input Current – compatible with modern high-performance solar modules Automatic UPS Switching – maintains power to selected loads during grid failure Peak Shaving Mode – reduces grid consumption during peak times Plug-and-Play Cabling – pre-made battery, meter, and CAN cables reduce installation time Battery Compatibility – works with a variety of lithium battery brands Enhanced Battery Protection – operational features designed to preserve battery life Supports Unbalanced Loads – handles half-wave loads on the grid and backup port Specifications Weight: 31.8 kg Rated Power: 8,000 W Min PPT Voltage: 160 V Max PPT Voltage: 850 V DC Startup Voltage: 160 V DC Shutdown Voltage: 160 V Max Input Voltage: 1,000 V Max DC Power: 12,800 W Max AC Power (5 Minutes): 8,800 W Surge AC Power (1 Second): 9,600 W Max DC Current: 64 A Max DC Inputs: 4 DC Fuses: None Connector Type: MC4 Included Connectors: 6 Euro Efficiency: 97.7 % Transformer: None MPPT Quantity: 4 Integrated DC Switch: Yes Warranty: 5 years Benefits of the Solis S6 Hybrid Inverter Flexible System Design – multiple MPPTs for varied solar array layouts Reliable Backup Power – ensures essential loads are powered during outages Quick Installation – pre-made cables and integrated monitoring simplify setup Optimized Energy Storage – compatible with a variety of lithium battery brands for scalable storage solutions ✅ The Solis S6 Hybrid Inverter combines flexible design, high efficiency, and reliable backup capabilities, making it ideal for modern residential and commercial solar installations.

 Duracell solar battery Dura5 IP65 5.12kW LiFePO4 Battery #5: PD-5KWH-50V-2G-IP65 Duracell5 Data Sheet   *Please note that Dura5 batteries are not compatible with Dura5+ or Puredrive batteries. Cables included for connecting to Hybrid inverter and for battery to battery.  For a complete system with the right hybrid inverter for you please visit the Duracell page Duracell Energy Dura5 5.12kWh Battery Storage System ⚠️ Compatibility notice:Dura5 batteries are not compatible with Dura5+ or Puredrive battery systems. The Duracell Energy Dura5 5.12kWh battery is a high-performance, modular home energy storage solution designed to maximise self-consumption, reduce energy bills, and deliver a strong return on investment. Combining Duracell’s proven battery technology with a powerful smart app, the Dura5 offers fast charging, long service life, and intelligent energy management, making it ideal for modern solar and battery installations. Flexible Installation Options The Dura5 battery can be installed: Wall mounted Floor standing Its sleek, compact design allows for discreet indoor installation while maintaining excellent performance and accessibility. Modular & Scalable Design With a simple modular format, you can: Add additional batteries at any time Expand your system to up to 32 batteries Increase capacity as your energy needs grow This flexibility makes the Dura5 a future-proof solution for homeowners looking to increase energy independence over time. Smart Energy Management Using the Duracell Energy smart app, you can: Monitor battery performance in real time Manage solar generation, battery storage, and EV charging Optimise savings with time-of-use energy tariffs Control all compatible Duracell Energy products from one interface What’s Included Power cables for battery-to-battery connection Cables for connection to a hybrid inverter Battery-to-battery communication cable Cable length: 1.7 metres

Solis S6 10kW 3PH High Voltage Hybrid Inverter (incl. 3PH meter) #2: SOL-S6-EH3P-10.0K-H-EU Storage Systems - Hybrid Inverter Solis S6 10kW Inverter Data Sheet Solis S6 10kW Inverter Manual & Install Guide Solis S6 10kW Inverter Warranty Solis S6 10kW G100 Certificate   Solis S6 Hybrid Inverter 10kW – Flexible Solar & Battery Storage Solution Please note: This inverter comes with the S2-WL-ST data logger stick (WiFi & LAN) and a 3-phase meter from Eastron, providing full monitoring and control of your solar PV and battery system. The Solis S6 Hybrid Inverter offers maximum flexibility with its 3 or 4 MPPTs, making it compatible with modern high-performance solar modules. In the event of a grid power failure, the integrated switching device ensures selected loads continue to receive emergency power, making it ideal for residential and commercial energy storage systems. Key Features Integrated 3 or 4 MPPTs for multiple array orientations 50A per 10kW maximum charge/discharge rating Automatic UPS switching for backup power Supports peak shaving mode to optimise energy use Pre-made battery, meter, and CAN cabling to reduce installation time Supports unbalanced and half-wave loads on the grid and backup port Compatible with multiple lithium battery brands Enhanced battery protection and operational features to extend battery life Technical Specifications Specification Details Weight 31.8 kg Rated Power 10,000 W MPPT Voltage Range 200 V – 850 V DC Startup Voltage 160 V DC Shutdown Voltage 160 V Max Input Voltage 1,000 V Max DC Power 16,000 W Max AC Power (5 min) 11,000 W Surge AC Power (1 sec) 12,000 W Max DC Current 64 A Max DC Inputs 4 DC Fuses 0 Connector Type MC4 Included Connectors 4 Euro Efficiency 97.7% Transformer None MPPT Quantity 4 Integrated DC Switch Yes Warranty 5 years Why Choose the Solis S6 Hybrid Inverter? The Solis S6 10kW Hybrid Inverter is perfect for UK homes and businesses seeking a reliable, high-efficiency solar and battery storage solution. With intelligent backup power, flexible array configurations, and comprehensive monitoring, it maximises energy self-consumption while safeguarding your critical loads during grid outages. Order now from ITS Technologies – your trusted UK supplier of Solis inverters, hybrid systems, and smart energy solutions.  

Solis S6 15kW Three Phase Hybrid High Voltage Inverter  #2:SOL-S6-EH3P15K-H Storage Systems - Hybrid Inverter Solis S6 15kW Inverter Data Sheet Solis S6 15kW Inverter Manual & Install Guide Solis S6 15kW Inverter Warranty Solis S6 Battery Compatibility List  Solis S6 Hybrid Inverter Collection – Solar PV & Battery Storage Solutions Ensure maximum energy harvest and reliable backup with the Solis S6 Hybrid Inverter, designed for modern UK solar PV and battery storage systems. Compatible with residential and commercial installations, this inverter offers flexible installation options, advanced battery control, and uninterrupted power supply in the event of a grid failure. Key Features Multiple MPPTs: 3 or 4 Maximum Power Point Trackers for flexible solar array orientations and optimal energy harvest. High Charge/Discharge Capability: 50A per 10kW for efficient battery management. String Current & Surge Power: Up to 20A per string with 200% surge for 10 seconds. Parallel Expansion: Supports up to 6 units in parallel for larger solar systems. Peak Shaving & Load Management: Reduce energy costs with advanced peak shaving and load optimisation. Automatic UPS Switching: Provides uninterrupted backup for selected loads during grid outages. AC Coupling Ready: Easily upgrade existing grid-connected systems. Customisable Battery Settings: Up to 6 charge/discharge modes for tailored battery management. Technical Specifications Specification Details Weight 31.7 kg Rated Power 15,000 W MPPT Voltage Range 200 V – 850 V DC Startup Voltage 160 V DC Shutdown Voltage 160 V Max Input Voltage 1,000 V Max DC Power 24,000 W Max AC Power (5 min) 15,000 W Surge AC Power (1 sec) 15,000 W Max DC Current 52 A Max DC Inputs 4 DC Fuses 0 Connector Type MC4 Included Connectors 4 Euro Efficiency 97.7% Transformer None MPPT Quantity 2 Integrated DC Switch No Warranty 5 years Package Includes 1 x Solis S6 Hybrid Inverter 3 x Direct-Connection Current Sensors for accurate monitoring Why Choose the Solis S6 Hybrid Inverter? Perfect for UK households and commercial solar PV systems, the Solis S6 delivers high efficiency, flexible installation options, and reliable backup power. Its advanced MPPT technology maximises energy harvest, while UPS capabilities ensure uninterrupted supply during outages.  

Pylontech Force H3 5.1kWh High Voltage Battery Module #2: PYL-F-H3-BATT Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty  TUV Certificate   Pylontech Force H3 – High-Voltage LiFePO4 Battery Storage Part No: [Insert Part No] | Category: High-Voltage Batteries ⚡ Reliable High-Voltage Energy Storage for Homes & Businesses The Pylontech Force H3 is the latest-generation high-voltage LiFePO4 battery designed for efficient, scalable energy storage. Engineered for both residential and commercial applications, this system delivers long-lasting performance and fast charging/discharging capabilities. With over 8,000 charge cycles or a lifespan of up to 15 years, it provides dependable energy for years to come. 🌟 Key Features ✔️ Easy Installation – plug and play setup ✔️ Scalable Design – connect up to 6 battery towers in parallel ✔️ Fast Charging & Discharging – 1C rating for maximum performance ✔️ Globally Certified – meets international safety and quality standards ✔️ High Cycle Life – 8,000+ cycles or 15-year design life ✔️ Remote Monitoring – manage and monitor battery status via app ✔️ Cross-Brand Compatibility – integrates with well-known inverters and hybrid systems ✔️ Standard Warranty – 10 years 🔋 Technical Specifications Weight: 42 kg Nominal Energy: 5,100 Wh Depth of Discharge (DoD): 90% Voltage: 102 V Continuous Discharge Rate (Normal Use): 4,080 W Maximum Discharge Rate (5 Minutes): 5,100 W Surge Discharge Rate (15 Seconds): 5,100 W ✅ Why Choose Pylontech Force H3? Ideal for residential solar and hybrid storage systems Reliable LiFePO4 chemistry for safety and longevity Flexible scalable configuration for growing energy needs High efficiency and rapid response for critical loads Remote monitoring ensures complete control and peace of mind  

Pylontech Force H3 5.1kWh High Voltage Battery Module #2:  PYL-F-H3-BATT-BMU-10.2 Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty   Pylontech Force H3 High-Voltage LiFePO4 Battery Storage System Upgrade your energy storage with Pylontech’s latest Force H3 high-voltage LiFePO4 battery system, designed for residential and commercial use. Reliable, scalable, and efficient – perfect for modern energy solutions. Key Features Easy Installation Plug-and-play setup for fast and hassle-free installation. High Scalability Connect up to 6 battery towers in parallel to meet your energy demands. Fast Charging & Discharging 1C rating enables faster charging and discharging for efficient energy use. Global Certification Tested and certified for worldwide standards. Long Lifespan Designed for 8,000+ charge cycles or 15 years of reliable operation. Remote Monitoring Monitor battery performance and status easily via a mobile app. Warranty 10-year standard warranty for peace of mind. Compatibility Works seamlessly with other well-known brands for flexible system integration. What’s Included 2 x Pylontech Force H3 5.1kWh High Voltage Battery Module (PYL-F-H3-BATT) 1 x Pylontech Force H3 BMU with base and cables (PLY-F-H3-BMU-BASE) Technical Specifications Weight: 104.2 kg Nominal Energy: 10,200 Wh Depth of Discharge: 95% Voltage: 240 V Continuous Discharge Rate: 10,200 W Maximum Discharge Rate (5 minutes): 10,200 W Surge Discharge Rate (15 seconds): 10,608 W Why Choose Pylontech Force H3? The Pylontech Force H3 is ideal for homeowners and businesses looking to maximise energy efficiency. Its high-voltage design, long lifespan, and advanced monitoring make it a top choice for solar energy systems, backup power, and renewable energy projects.  

Pylon Force-H3 High Voltage System stack of 3 incl. BMU (15.4 kWh) #2:   PYL-F-H3-BATT-BMU-15.4 Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty   Pylontech Force H3 – High-Voltage Lithium Iron Phosphate (LiFePO4) Battery System The Pylontech Force H3 is the latest generation high-voltage battery storage solution, designed for scalable, reliable, and long-lasting energy storage. Perfect for residential or commercial applications, this system offers plug-and-play installation, high efficiency, and robust performance. ⚡ Key Features Easy Installation Plug-and-play setup – get your system running quickly without complex wiring Scalable Design Connect up to 6 battery towers in parallel for increased capacity Perfect for future expansion High Performance 1C rating enables faster charging and discharging Supports 8000+ cycles or up to 15 years of reliable operation Remote Monitoring Track and manage your battery system via app from anywhere Broad Compatibility Works with a wide range of inverters and hybrid systems Globally certified for quality and safety Warranty 10-year standard warranty for peace of mind 🔋 System Specifications Included Components: 3 × Pylontech Force H3 5.1kWh Battery Modules (PYL-F-H3-BATT) 1 × Pylontech Force H3 BMU with base and cables (PLY-F-H3-BMU-BASE) Weight: 146.2 kg Nominal Energy: 15.36 kWh Depth of Discharge: 95% Voltage: 307 V Continuous Discharge Rate (Normal Use): 15,360 W Maximum Discharge Rate (5 Minutes): 15,360 W Surge Discharge Rate (15 Seconds): 16,896 W ✅ Why Choose Pylontech Force H3? Plug-and-play for easy installation Scalable for future growth High cycle life for long-term reliability Remote monitoring and control 10-year warranty backed by a trusted global brand  

Pylon Force-H3 High Voltage System stack of 4 incl. BMU (20.5 kWh) #2:  PYL-F-H3-BATT-BMU-20.5 Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty Pylontech Force H3 – High-Voltage LiFePO4 Battery Storage System The Pylontech Force H3 is a next-generation high-voltage battery storage solution (LiFePO4) designed for residential and commercial solar installations. Its modular design allows for scalable energy storage, giving you flexibility and reliability for long-term energy management. This system is ideal for those seeking high efficiency, long cycle life, and plug-and-play installation with the ability to expand as your energy needs grow. Product Contents 4 x Pylontech Force H3 5.1kWh High Voltage Battery Modules (PYL-F-H3-BATT) 1 x Pylontech Force H3 BMU with base and cables (PLY-F-H3-BMU-BASE) Key Features Easy Install – plug and play for quick setup Scalable – connect up to 6 battery towers in parallel High Cycle Life – designed for 8,000+ cycles or 15 years of operation Fast Charging & Discharging – 1C rating for rapid energy flow Remote Monitoring – monitor performance via app Wide Compatibility – works with other well-known battery brands Globally Certified – meets international safety and performance standards Warranty – 10-year standard Specifications Weight: 188.2 kg Nominal Energy: 20,480 Wh Depth of Discharge: 95 % Voltage: 409 V Continuous Discharge Rate (Normal Use): 20,840 W Maximum Discharge Rate (5 Minutes): 20,840 W Surge Discharge Rate (15 Seconds): 22,258 W Maximum Discharge Rate (5 Minutes): 20,480 W Benefits Flexible Energy Storage – expand your system as your energy demands grow Long-Term Reliability – LiFePO4 chemistry ensures stability and longevity High Performance – supports continuous and surge loads efficiently Plug-and-Play Installation – reduces installation time and complexity ✅ The Pylontech Force H3 is a robust, high-voltage battery solution, perfect for scalable solar energy storage with long-term reliability and smart monitoring capabilities.  

Pylon Force-H3 High Voltage System stack of 5 incl. BMU (25.6 kWh) #2:  PYL-F-H3-BATT-BMU-25.6 Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty Pylontech Force H3 – High Voltage Battery Storage System (25.6kWh) The Pylontech Force H3 is Pylontech’s latest generation high-voltage battery storage solution, built with advanced LiFePO4 (lithium iron phosphate) technology. Designed for seamless integration with solar PV and hybrid inverters, the Force H3 delivers long-lasting, reliable energy storage for both residential and commercial applications. This complete package includes: 5 x Pylontech Force H3 5.1kWh High Voltage Battery Modules (PYL-F-H3-BATT) 1 x Pylontech Force H3 BMU with base and cables (PLY-F-H3-BMU-BASE) With scalable capacity, remote monitoring, and a 10-year warranty, the Pylontech Force H3 is a future-ready storage system for efficient, sustainable energy management. Key Features ✅ Plug & Play Installation – quick and simple setup ✅ Scalable Design – up to 6 towers can be connected in parallel ✅ High Performance – 1C rating allows faster charging & discharging ✅ Long Lifespan – designed for 8,000+ charging cycles or 15 years ✅ Remote Monitoring – via dedicated app for real-time management ✅ Wide Compatibility – works with well-known inverter brands ✅ Certified & Safe – globally recognised certifications ✅ 10-Year Standard Warranty – peace of mind investment Technical Specifications General Weight: 230.2 kg Nominal Energy: 25,600 Wh (25.6 kWh) Depth of Discharge (DoD): 95% Warranty: 10 years Electrical Performance Voltage: 512 V Continuous Discharge Rate (Normal Use): 25,600 W Maximum Discharge Rate (5 minutes): 25,600 W Surge Discharge Rate (15 seconds): 28,160 W Why Choose the Pylontech Force H3? Built with LiFePO4 technology – safe, efficient, and long-lasting Provides large-scale energy storage for UK solar PV systems Enables faster charging/discharging with a 1C rating Designed for 15+ years of reliable performance Easy to expand for growing energy needs ✅ The Pylontech Force H3 is a powerful, scalable, and future-proof high-voltage battery storage system – ideal for maximising solar energy use and reducing grid dependence.

Pylontech Force H3 BMU with base and cables #2:  PYL-F-H3-BMU-BASE Storage Systems - Battery Base Pylon Force-H3 Datasheet Pylon Force-H3 Installation Manual Pylon Force-H3 Warranty   Pylontech Force H3 BMU – High-Voltage LiFePO4 Battery System The Pylontech Force H3 BMU is a cutting-edge, high-voltage LiFePO4 battery storage solution, designed for residential and commercial energy storage applications. Engineered for scalability, safety, and longevity, this battery management unit (BMU) ensures optimal performance when paired with Pylontech Force H3 batteries. Key Features Easy Installation: Plug-and-play setup for a hassle-free installation process. Scalable Design: Connect up to 6 battery towers in parallel to expand your energy storage capacity. High Performance: 1C rating allows for faster charging and discharging cycles. Long Lifespan: Designed for over 8,000 charge cycles or up to 15 years of reliable use. Remote Monitoring: Track battery performance conveniently via a mobile app. Global Certification: Complies with international safety and performance standards. Wide Compatibility: Works seamlessly with other well-known battery brands. Warranty: 10-year standard warranty for peace of mind. Technical Specifications Weight: 20.2 kg Battery Type: LiFePO4 (Lithium Iron Phosphate) System Compatibility: High-voltage Pylontech Force H3 series Scalability: Up to 6 battery towers in parallel Warranty: 10 years Why Choose Pylontech Force H3 BMU? Reliable and safe high-voltage energy storage solution. Expandable to meet growing energy demands. Designed for long-lasting performance and fast charge/discharge cycles. Easy integration with multiple brands for flexible installations. Monitor and manage your system remotely for smart energy control. Upgrade your solar or hybrid energy system with the Pylontech Force H3 BMU – a future-proof, efficient, and scalable battery management solution.

Dyness Power Box Pro 10.24kWh Lithium Battery IP65 90% D.O.D #4: Dyness-PB-Pro Dyness 10.24kWh Power Box Datasheet Dyness Compatibility List To view complete Dyness full range please visit our Dyness main page Battery to inverter cables included. For multiple batteries the battery to inverter cables will need to be wired through a busbar such as the Victron Lynx Distributor Dyness Powerbox Pro 10kWh – High-Capacity LFP Home Battery Reliable Energy Storage for Homes and Off-Grid Systems The Dyness Powerbox Pro 10kWh is a high-capacity, low-voltage lithium iron phosphate (LFP) battery designed for superior safety, long lifespan, and an optimised user experience. Ideal for residential and off-grid energy systems, this IP65-rated battery can be installed indoors or outdoors, offering flexible wall-mounted or floor-standing options. Key Features of Dyness Powerbox Pro ✅ High-Capacity & Scalable Single unit: 10kWh Supports up to 5 units in parallel to meet larger household energy demands ✅ Deep-Cycle LFP Technology Enhanced safety and stability compared to traditional lithium-ion batteries Long lifespan for reliable, long-term energy storage ✅ Flexible Installation Options IP65-rated for indoor or outdoor use Wall-mounted or floor-standing for convenient placement ✅ Wide Compatibility Works with most major inverter brands Compatible with hybrid and off-grid systems ✅ App Monitoring & Remote Management Real-time monitoring of battery status Remote upgrades available for optimised performance Technical Specifications Battery Type: Lithium Iron Phosphate (LFP) Capacity: 10kWh per unit Voltage: Low voltage, deep-cycle design Dimensions: 555 x 210 x 928 mm Weight: 103 kg Recommended Charge/Discharge Rate: 0.5C Mounting Options: Wall-mounted or floor-standing Protection Rating: IP65 (indoor/outdoor) Parallel Capability: Up to 5 units Why Choose the Dyness Powerbox Pro? High-capacity energy storage for homes and off-grid setups Flexible installation options for indoor or outdoor use Advanced safety and long lifespan with LFP technology Scalable solution to meet increasing household energy needs Smart monitoring via app for easy management Frequently Asked Questions (FAQs) Can the Dyness Powerbox Pro be used outdoors? Yes, it is IP65-rated, making it suitable for both indoor and outdoor installations. How many batteries can be connected in parallel? Up to 5 units can be connected to increase total energy capacity for larger households. Is the Dyness Powerbox Pro compatible with my inverter? Yes, it is widely compatible with major inverter brands and supports both hybrid and off-grid systems. Can I monitor the battery remotely? Yes, the Powerbox Pro supports real-time monitoring and remote upgrades via the Dyness app. Buy Dyness Powerbox Pro 10kWh in the UK Order your Dyness Powerbox Pro from ITS Technologies today for fast UK delivery, competitive pricing, and expert technical support. Future-proof your home energy system with high-capacity, scalable, and reliable battery storage.        

Sunsynk 25kW Solar Hybrid Inverter - 3-Phase - High Voltage - WiFi Included 20#: SYNK-25K-SG01HP3-EU Sunsynk 3ph 25kW Data Sheet Sunsynk 3ph 25kW User Manual Sunsynk 3ph 25kW Warranty To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk 25kW Three-Phase Hybrid Inverter The 25kW three-phase hybrid inverter from Sunsynk is engineered for commercial and industrial applications, delivering reliable power management across solar PV, battery storage, grid, and generator sources. Designed to manage systems of up to 65kW, this inverter intelligently controls energy generation, storage, and consumption—helping businesses reduce energy costs, increase self-consumption, and improve resilience. With remote monitoring via the Sunsynk Connect app, users can optimise performance, track system data in real time, and adjust power flows remotely. The inverter is straightforward to install and maintain, with a fully programmable control platform that enables efficient energy storage and controlled power release exactly when it’s needed. Key Features Dual MPPT design with flexible string configuration Smart, configurable 3-stage MPPT charging for optimised battery performance Compatible with grid supply or generator input Wind turbine compatible Automatic restart during AC grid recovery Fully programmable energy management controller Comprehensive overload, over-temperature, and short-circuit protection Technical Specifications Maximum Charge Current: 50 A Maximum Discharge Current: 50 A Maximum DC Input Power: 32,500 W Maximum AC Input Power: 25,000 W Maximum Efficiency: 97.6% MPPT Trackers: 2 Strings per MPPT: 2 + 2 Warranty: 5 years Ideal For Commercial and industrial solar + battery systems Hybrid PV, battery, and generator installations Sites seeking peak-shaving, load shifting, and backup power Businesses looking to optimise energy costs and resilience

Solis Three Phase 50kW High Voltage Hybrid Inverter #2: SOL-S6-EH3P50K-H  Storage Systems - Hybrid Inverter Solis S6 50kW Inverter Data Sheet Solis S6 50kW Inverter Manual & Install Guide Solis S6 50kW Inverter Warranty Solis S6 50kW Product Compatibility List   Solis S6 Hybrid Inverter – Flexible, High-Performance Solar Solution The Solis S6 Hybrid Inverter is designed for maximum flexibility and efficiency in both residential and commercial PV systems. Equipped with 3 or 4 MPPTs, it ensures optimal performance with high-current modern solar panels. In the event of a grid failure, the integrated switching device supplies emergency power to selected loads, providing reliable backup energy. Includes S4 Wi-Fi/LAN stick and full Solis Cloud support for easy remote monitoring and firmware updates. Key Features 4 MPPTs / 8 Strings: Supports up to 96kW of PV input for large-scale systems. High Charge/Discharge Capacity: 50A per 10kW; 140A/70A+70A on dual independently controlled ports. String Current Up to 20A: Compatible with high-performance PV modules. Surge Power Handling: 160% surge for 2 seconds to accommodate backup loads. Scalable System: Supports up to 6 inverters in parallel (up to 300kW). UPS & Peak Shaving: Fast UPS transfer (<10 minutes) and advanced peak shaving capabilities. Integrated AFCI: DC arc-fault protection for enhanced safety. Monitoring & Control: LCD display plus remote firmware upgrades via Solis Cloud. Specifications Specification Value Weight 73 kg Rated Power 50,000 W Min MPPT Voltage 180 V Max MPPT Voltage 850 V DC Startup Voltage 180 V DC Shutdown Voltage 150 V Max Input Voltage 1,000 V Max DC Power 100,000 W Max AC Power (5 min) 50,000 W Surge AC Power (1 sec) 80,000 W Max DC Current 160 A Max DC Inputs 8 DC Fuses None Connector MC4 Included Connectors 8 Euro Efficiency 97.4% Transformer None MPPT Quantity 4 Integrated DC Switch Yes Warranty 5 years (extendable to 5/10/15 years)  

GivEnergy 9.5kWh Li-Ion Battery Gen 3 #2: GIV-BAT-9.5-G3  #3: 6459 GivEnergy 9.5kWh Datasheet GivEnergy 9.5kWh Installation Manual GivEnergy 9.5kWh Warranty GivEnergy Battery Cable Compatibility Chart GivEnergy Gen 9.5kWh LiFePO4 Battery – Compact, High-Capacity Energy Storage The GivEnergy Gen 9.5kWh Battery offers a perfect balance of power, safety, and flexibility for medium to large properties. Using the latest LiFePO4 prismatic cell technology, this battery delivers high capacity in a compact form, making it easy to install in a wider range of locations. Key Features: High Safety: Non-flammable LiFePO4 chemistry, cobalt-free, and 99% recyclable Compact & Lightweight: Ideal for retrofit or new installations in limited spaces Plug & Play Installation: Quick and easy setup Remote Firmware Upgrades: Stay up-to-date without physical access Durable & Weather Resistant: IP65 rated for reliable indoor or outdoor use Flexible Energy Use: 100% Depth of Discharge maximizes usable capacity Technical Specifications: Nominal Energy: 9.5 kWh Weight: 85 kg Voltage: 51 V Continuous Discharge Rate (Normal Use): 6,144 W Maximum Discharge Rate (5 mins): 6,144 W Surge Discharge Rate (15 secs): 7,080 W Maximum Charge Rate (5 mins): 6,144 W Depth of Discharge: 100% Warranty: 12 years IP Rating: IP65 The GivEnergy Gen 9.5kWh Battery is ideal for homeowners seeking high-capacity, safe, and reliable energy storage, whether for daily self-consumption, solar backup, or scalable multi-battery systems. Please note: Givenergy online portal login is required to fully commission this system. If you do not already have a login, please contact GivEnergy before installing. Further all installers need to ave attended GivEnergy Installer Training to install this item. A non-trained installer will void the warranty. A Givenergy system must be connected to the internet to benefit from full warranty services.

Sunsynk 12kW Solar Hybrid Inverter - Single Phase - WiFi Included G99 G100 #2: SUN-12.0-1PH Sunsynk 12kW Single Phase Data Sheet Sunsynk 12kW Single Phase User Manual Sunsynk Compatible Batteries Sunsynk 12kW Single Phase Warranty To view our full range of Sunsynk products visit our main Sunsynk page here The SunSynk 12kW Inverter is the next generation of super hybrid inverters with a 18000W MPPT and a rated AC output of 12kW. This single phase inverter generates sufficient energy in winter offsetting  overall usage. Features Dual MPPT design  Compatible with Lithium-ion batteries and Lead Acid batteries Up to 50kWh battery pack IP65 rated Anti-islanding protection Fully programmable power export Automatic switching from Grid-Tied to Off-Grid mode Up to 16 units with the same firmware can be paralleled Warranty: 5 years standard Specs Weight: 42kg Max. Charge Current: 250A Max Discharge Current: 250A Max. PV Input Power 15,600W No of MPPT / Strings Per MPPT: 3 / 2+2+2 Rated AC Input/Output Active Power: 12,000 W Maximum Efficiency: 97.60% Max. Discharge Current 250A Take complete control of your inverter by using the Sunsynk App.  Start by visiting the Apple App Store, or Google play store and searching "Sunsynk Logger". Alternatively, open your prefered web browser and search www.sunsynk.net.  Real time push notifications. For example Instant notification if you have a power cut or you are running on generator, or batteries. Change all settings remotely. The Sunsynk data logger allows you to change and edit all settings remotely from anywhere in the world, provided that you have an Internet connection. Complete control over your Hybrid Inverter. Using the Sunsynk data logger gives you complete control over your hybrid inverter. You will gain access to features that cannot be accessed via the inverter control panel, such as the update / upgrade feature to update the inverter operating system yourself. Real-time monitoring. The majority of the Sunsynk app works in real-time including any changes that you make will instantly update on your inverter. Live stats and monitoring. You have access to multiple stats including live monitoring and reporting. Using this app allows you to see peaks in your energy usage, you can then customize your system to work around this to help you save money on your electricity bills. Reporting. Generate custom reports and graphs to help you monitor and understand how your system is working and where you are saving money. Sunsynk is integrated with Octopus Agile, Flux & Go. The Sunsynk data logger platform has been integrated with Octopus Agile. Having access to these rates, you can setup and monitor your charge and discharge figures, this enables you to charge your battery at the cheapest rates. When the price increases your battery discharges and saves you money.

SolaX Triple Power T30 3.0kWh Battery Module #2: HV10230 Storage Systems - Li-ion Battery Pack   SolaX Triple Power 3.0kWh Data Sheet SolaX Triple Power Manual Important Note This listing is for the battery module only. A Battery Management System (BMS) is required for operation and must be purchased separately (T30 Battery BMS or MC0600). Triple Power Cable and base kit: Required for 3 and 4 T30 batteries Features Battery Chemistry: Lithium Iron Phosphate (LiFePO4) Capacity: 2,500 Wh (2.5 kWh) Nominal Voltage: 102 V Safest LiFePO4 technology with 30 Ah cells Depth of Discharge: 90% Smart temperature balancing for enhanced safety and efficiency Working Temperature Range: -30°C to 50°C Cycle Life: > 6,000 cycles IP65 Protection – dust and water resistant Low self-consumption Quick and easy installation Performance Specifications Continuous Discharge Rate (Normal Use): 3,072 W Maximum Discharge Rate (5 Minutes): 3,072 W Surge Discharge Rate (15 Seconds): 3,100 W Maximum Charge Rate (5 Minutes): 3,072 W Weight: 34.5 kg Summary This Solax Triple Power 2.5kWh LiFePO4 battery module is a high-performance, safe, and compact storage solution. When paired with a compatible BMS, it is ideal for scalable solar energy storage setups. For a full list of SolaX products click here.

Solax T30 Battery BMS #2: MC0600  Storage Systems - Communication Module   SolaX Triple Power 3.0kWh Data Sheet SolaX Triple Power Manual SolaX Triple Power Warranty Solax Triple Power Battery BMS Overview The Solax Battery Management System (BMS), model MC0600, is designed for use with 1 to 4 Solax Triple Power 3.0kWh batteries. It ensures safe operation, maximizes battery life, and protects against overcharge, over-discharge, and other potential hazards. Key Features Compatible with 1–4 Solax Triple Power 3.0kWh batteries Safest LiFePO4 chemistry (30 Ah) for reliable and safe energy storage Wide operating temperature range: -30°C to 50°C Cycle life: over 6,000 cycles IP65 protection: suitable for indoor or outdoor installation Low self-consumption for efficiency Quick and easy installation Free from toxic heavy metals, environmentally safe Specifications Weight: 7.5 kg Protection Rating: IP65 Battery Type: LiFePO4 Max Batteries Supported: 4 The MC0600 BMS provides a robust, safe, and efficient solution to manage your Solax battery system while maintaining optimal performance over its lifecycle. For a full list of SolaX products click here.

Sunsynk 50kW, HV Three Phase Hybrid Inverter #2: SUN-50.0-3PH Sunsynk 3ph 50kW Data Sheet Sunsynk 3ph 50kW User Manual Sunsynk 3ph 50kW Warranty To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk 50kW Three Phase High Voltage Hybrid Inverter – Commercial & Industrial Solar Solution The Sunsynk 50kW Hybrid Inverter is the ideal choice for commercial and industrial properties seeking efficient, high-capacity solar and energy storage management. Capable of managing up to 65,000W of power, it intelligently controls energy flow from multiple sources, including solar panels, the main electrical grid, and generators. Remote monitoring is available via the Sunsynk app, allowing you to optimise system performance from anywhere. Please note: Installation must be carried out by a qualified technician, following local wiring regulations and standards. Failure to do so will invalidate the warranty. Key Features of the Sunsynk 50kW Hybrid Inverter 4 MPPT Trackers for flexible PV array configurations Supports DC oversizing up to 30% beyond rated AC power Can operate without batteries if required WiFi remote monitoring included as standard for convenient system control Type II DC/AC SPD protection included Built-in safeguards for overload, over-temperature, and short-circuit protection Technical Specifications Specification Details Weight 75 kg Rated Power 50,000 W MPPT Voltage Range 150 V – 850 V DC Startup Voltage 180 V DC Shutdown Voltage 150 V Max Input Voltage 1,000 V Max DC Power 65,000 W Max AC Power (5 min) 50,000 W Surge AC Power (1 sec) 55,000 W Max Discharge Current 144 A Max DC Fuses 0 Connector Type MC4 Included Connectors 0 Euro Efficiency 97% Transformer None MPPT Quantity 4 Integrated DC Switch Yes Warranty 5 years Why Choose the Sunsynk 50kW Hybrid Inverter? The Sunsynk 50kW Hybrid Inverter is perfect for commercial and industrial solar systems that require high efficiency, flexible installation, and reliable power management. With multiple MPPTs, remote monitoring, and robust protection features, it ensures maximum energy utilisation, system safety, and long-term operational reliability. Shop now at ITS Technologies, the UK’s trusted supplier for commercial solar inverters, battery storage, and advanced energy solutions.

Sunsynk 50kW 3PH Hybrid Inverter with 20.48kWh Battery #2: SUN-3PH-50K-BATT-20.48 Storage Systems - Storage Package Sunsynk 3ph 50kW Data Sheet Sunsynk 3ph 50kW User Manual Sunsynk 3ph 50kW Warranty To view our full range of Sunsynk products visit our main Sunsynk page here Sunsynk 50kW HV Three Phase Hybrid Inverter System – Complete Kit This commercial-grade energy storage system combines a high-power three-phase inverter with multiple high-voltage battery units and a dedicated battery cabinet. Ideal for industrial and commercial applications, the system allows efficient power management from solar PV, the electrical grid, and generators, with full remote monitoring via the Sunsynk app. Installation Note: This system must be installed by a qualified technician. All installations must adhere to local wiring regulations to maintain warranty validity. System Components 1 x Sunsynk 50kW HV Three Phase Hybrid Inverter (SUN-50.0-3PH) 4 x Sunsynk 5.12kWh Single Battery Unit for HV Series (SUN-HV-5.12-BATT) 1 x BMS for Sunsynk HV Series (SUN-HV-BMS) 1 x Battery Cabinet with Door for 20.48kWh HV Battery (SUN-HV-20.48-BATTRACK-DOOR) Key Features High-capacity 50kW three-phase hybrid inverter for commercial and industrial properties 4 MPPT Trackers for flexible PV array configurations Supports DC oversizing up to 30% above rated AC power Can operate without batteries for AC-coupled applications WiFi remote monitoring included as standard Type II DC/AC SPD for surge protection Comprehensive protection: Overload, over-temperature, short-circuit Integrated DC switch for safe operation Inverter Specifications Weight: 75 kg Rated AC Power: 50,000 W Maximum AC Power (5 mins): 50,000 W Surge AC Power (1 sec): 55,000 W Max DC Power: 65,000 W Min PV Voltage: 150 V Max PV Voltage: 850 V DC Startup Voltage: 180 V DC Shutdown Voltage: 150 V Max Discharge Current: 144 A DC Fuses: None required Connector Type: MC4 Included Connectors: 0 Efficiency (Euro): 97% Transformer: None MPPT Quantity: 4 Warranty: 5 years Summary The Sunsynk 50kW HV Three Phase Hybrid System is a fully integrated, high-efficiency commercial energy solution. With flexible PV compatibility, high AC output, multiple safety protections, and remote monitoring capabilities, it provides reliable, scalable, and intelligent energy management for commercial properties.

Fox ESS EP5 5.18kWh Battery with Heating Element #2: FE-HV-EP5-H Storage Systems - Li-ion Battery Pack FOX ESS EP5 Data Sheet FOX ESS EP5 User Manual FOX Warranty FOX Battery Sizing Guide The EP5 is a high-performance, scalable battery storage system. With maximum flexibility, it is suitable for a wide range of storage applications. With a FE-JUNBOX-HV, additional batteries can be installed in parallel allowing for a maximum storage capacity of 20.8kWh.   Fox EP Series High Voltage Battery – 5.18kWh The Fox EP Series Battery delivers high-performance energy storage with a compact, easy-to-install design. Featuring 90% Depth of Discharge, high efficiency, and scalability up to 20.8kWh, this battery is ideal for residential and small commercial solar systems. ⚠️ Important: You must register your installation online with Fox to activate the 10-year product warranty. Without registration, the warranty defaults to 5 years. Note: EP Series batteries are only compatible with the same EP model and size. Key Features 🔋 5.18kWh usable storage with 90% Depth of Discharge ⚡ Scalable system – expand up to 20.8kWh 🧩 Flexible installation – floor or wall-mounted 💧 IP65-rated – suitable for indoor or outdoor use 🔒 High voltage, high efficiency for reliable performance 📜 10-year warranty (with online registration) Technical Specifications Nominal Energy: 5,180 Wh Nominal Voltage: 192 V Max. Charge/Discharge Current: 27 A Depth of Discharge: 90% Weight: 50.5 kg Dimensions (W x H x D): 380 × 625 × 147 mm IP Rating: IP65 ✅ Compact, reliable, and scalable – the Fox EP Series Battery is a smart investment for long-term energy independence.    

Fox AC 3.7kW Charger Inverter  #1: FE-AC1-3.7 Storage Systems - Charger-Inverter Fox 3.7kW Data Sheet Fox 3.7kW Inverter User Manual Fox 3.7kw Inverter Warranty Fox 3.7kw Inverter G100 Certificate FoxESS High Voltage Battery Management System (BMS) Ensure safe, efficient, and optimised battery performance with the FoxESS High Voltage BMS Unit, designed to seamlessly manage Fox EP5/11, HV2600 and Cube battery systems. Key Features Compatible Batteries: Fox HV2600 & Cube batteries Minimum Requirement: 2 x HV2600 batteries required for operation IP65 Rated: Suitable for outdoor installations Remote Monitoring: Access battery status and performance via smartphone or web portal Expandable: Easily add more batteries to grow your storage system Dual MPPT: Optimises solar production for maximum efficiency High Round-Trip Efficiency: 97% for superior energy retention Included Accessories: CT Clamp for installation and monitoring Benefits Easy Installation: Saves time with plug-and-play setup Reliable Safety: Monitors and protects your battery system automatically Scalable: Supports system expansion without hassle The FoxESS HV BMS Unit is the perfect companion for your high-voltage Fox battery storage system, combining safety, efficiency, and smart monitoring in a single compact unit.  

GivEnergy 3PH 20kW Hybrid Inverter#2: GIV-3HY-20.0-HV Storage Systems - Hybrid 3Phase Inverter GivEnergy 3PH 20kW Hybrid Inverter Datasheet GivEnergy 3PH 20kW Hybrid Inverter Installation Manual GivEnergy 3PH 20KW Warranty GivEnergy App Brochure GivEnergy Three-Phase Hybrid Inverter – 20kW The GivEnergy Hybrid Inverter for three-phase systems is a powerful and versatile solution, functioning as both a battery inverter and solar inverter in one unit. It supports both AC and DC coupling, ensuring seamless integration with solar PV panels and GivEnergy high-voltage batteries. This system allows you to generate electricity from solar panels, use it instantly, and store excess energy for later – maximising self-consumption and reducing reliance on the grid. Key Features Hybrid operation – integrates battery storage and solar generation in a single unit Plug-and-play installation – designed to save time and reduce setup complexity On/Off-grid phase balancing – ensures stable and efficient power distribution across three phases EPS support – 20kW emergency power supply for backup protection High compatibility – works exclusively with GivEnergy high-voltage batteries Long warranty – backed by a 12-year manufacturer warranty Technical Specifications Phases: 3 Rated AC Power: 11 kW Maximum AC Power (5 Minutes): 20,000 W Surge AC Power (1 Second): 20,000 W MPPT Voltage Range: 200–850 V Max DC Power: 30,000 W Max Input Voltage: 1,000 V DC Startup/Shutdown Voltage: 200 V Max DC Current: 60 A Max DC Inputs: 2 MPP Trackers: 2 (1 input per tracker) Efficiency (Euro): 97% EPS Output: 20kW Emergency Power Supply Connectivity: Wi-Fi included Meter: 3-Phase smart meter required (not included) Weight: 36 kg Warranty: 12 years Why Choose GivEnergy? GivEnergy’s hybrid inverter range is designed for reliability, flexibility, and smart energy management. With remote monitoring, on/off-grid functionality, and future-ready expandability, this three-phase inverter is a perfect fit for commercial sites and larger residential systems looking to maximise solar efficiency and reduce long-term energy costs.

GivEnergy 1PH Hybrid Inverter 10.0kW HV 3rd Generation #2: GIV-HY-10.0-G3-HV GivEnergy 1PH 10.0kW HV Gen 3 Datasheet GivEnergy 1PH 10.0kW HV Gen 3 Installation Manual GivEnergy Battery Compatibility Chart GivEnergy Product Warranty   GivEnergy Gen 3 Hybrid Inverter – 3.6kW Harness solar power efficiently with the GivEnergy Gen 3 Hybrid Inverter, designed to generate electricity from your solar panels and store surplus energy in high-voltage batteries for later use. Reduce grid imports and maximise your energy independence with smart discharge management. Key Features High Compatibility: Works with GivEnergy HV (High Voltage) Storage Batteries Not Compatible with LV Batteries In-Built Connectivity: WiFi and LAN for easy monitoring and control Higher Charge/Discharge Rates: Supports faster energy flows for more efficient storage Flexible Rate Tariff: Optimises usage according to electricity tariffs Warranty: 12-year warranty on all GivEnergy batteries and inverters Important Notes Earth Bonding Kit Required: Must be added separately (GIV-PE-KIT-G3) GivEnergy Online Portal Login: Required for full commissioning Trained Installer Required: Warranty void if fitted by non-trained installer Internet Connection: Required to benefit from full warranty services Specifications Weight: 32 kg Rated Power: 3,600 W Min PPT Voltage: 120 V Max PPT Voltage: 580 V DC Startup Voltage: 150 V DC Shutdown Voltage: 150 V Max Input Voltage: 580 V Max DC Power: 15,000 W Max AC Power (5 Minutes): 3,600 W Surge AC Power (1 Second): 3,600 W Max DC Current: 30 A Max DC Inputs: 2 MPPT Quantity: 2 Efficiency: 97% Euro Efficiency Connector: MC4 (4 included) DC Fuses: None Integrated DC Switch: No Transformer: None The GivEnergy Gen 3 Hybrid Inverter provides a robust, reliable solution for residential solar systems, delivering seamless integration with high-voltage battery storage and smart energy management.  

GivEnergy 1PH Hybrid Inverter 8kW HV 3rd Generation #2: GIV-HY-8.0-G3-HV GivEnergy 1PH 8.0kW HV Gen 3 Datasheet GivEnergy 1PH 8.0kW HV Gen 3 Installation Manual GivEnergy Battery Compatibility Chart GivEnergy Product Warranty   GivEnergy Gen 3 Hybrid Inverter – 8kW The GivEnergy Gen 3 Hybrid Inverter is a next-generation energy solution designed for UK homes and businesses. It can be connected directly to solar panels to generate usable electricity while storing excess energy in compatible GivEnergy high-voltage batteries. This allows you to maximise solar self-consumption, reduce reliance on the grid, and lower energy bills. With its advanced features, flexible tariff optimisation, and robust 12-year warranty, the GivEnergy Gen 3 Hybrid Inverter is an ideal choice for homeowners looking to future-proof their energy system. Key Benefits of the GivEnergy Gen 3 Hybrid Inverter Efficient energy storage – excess solar power is stored for later use. Smart grid management – minimises imported electricity by discharging intelligently to meet demand. Seamless integration – works with GivEnergy high-voltage battery storage systems. Peace of mind – backed by a 12-year manufacturer’s warranty. ⚠️ Important: This inverter is not compatible with GivEnergy low-voltage batteries. An earth bonding kit (GIV-PE-KIT-G3) must be purchased separately for installation. Features In-built WiFi and LAN connectivity Higher charge/discharge rate for improved performance Supports flexible energy tariffs Durable design with a 12-year warranty Technical Specifications General Weight: 32 kg Rated Power: 8,000 W Euro Efficiency: 97 % Warranty: 12 years Voltage & Current Min PPT Voltage: 90 V Max PPT Voltage: 550 V DC Startup Voltage: 80 V DC Shutdown Voltage: 80 V Max Input Voltage: 600 V Max DC Power: 12,000 W Max AC Power (5 min): 8,000 W Surge AC Power (1 sec): 12,000 W Max DC Current: 50 A Connections Max DC Inputs: 4 Connector Type: MC4 (4 included) Integrated DC Switch: No Transformer: None MPPT Quantity: 2 Installation & Warranty Conditions A GivEnergy online portal login is required to commission the system. Contact GivEnergy before installation if you do not have an account. Installation must be carried out by a GivEnergy-trained installer. Non-approved installations will void the warranty. The system must remain connected to the internet to benefit from the full warranty and remote monitoring services. ✅ Optimised for UK energy tariffs, solar compatibility, and long-term reliability – the GivEnergy Gen 3 Hybrid Inverter is a smart investment for sustainable home energy.  

SolarEdge Branch Connectors for Home Battery 400V 2: IAC-RBAT-RWYCBL-01  #3: 5014   SolarEdge Branch Connectors – Home Battery 400V Ensure a safe and reliable parallel connection of multiple SolarEdge Energy Bank batteries with these official branch connectors. Designed for easy installation and secure performance, they are an essential accessory for expanding your home energy storage system. 🔑 Key Features Compatible with SolarEdge Energy Bank batteries (400V) Enables parallel connection of multiple batteries Includes 1 pair: 1x male and 1x female connector Durable design for long-lasting reliability Essential for expanding and optimising battery capacity ⚡ Technical Specs Part Number: IAC-RBAT-RWYCBL-01 Application: DC Battery Storage Connection Type: Male & Female pair 🌍 Why Choose SolarEdge Accessories? Using genuine SolarEdge connectors ensures optimal performance, safety, and compatibility with your home battery system, giving you peace of mind when scaling your energy storage.

SolarEdge Floor Stand Kit for Home Battery 400V #2: IAC-RBAT-FLRSTD-01  #3: 4051   SolarEdge Energy Bank Floor Stand Kit Easily install your SolarEdge Energy Bank with this Floor Stand Kit, designed to securely mount your battery directly on the floor. Perfect for homes or installations where wall-mounting isn’t suitable. Key Features Stable & Secure: Provides a strong base for safe floor mounting of your SolarEdge Energy Bank. Easy Installation: Simple setup with all necessary hardware included. Durable Construction: Built from high-quality materials to support the weight of your battery and ensure long-lasting reliability. Compatibility: Specifically designed for SolarEdge Energy Bank batteries. Meta Description:SolarEdge Energy Bank Floor Stand Kit – secure and durable floor mounting solution for SolarEdge batteries. Easy to install and built for long-lasting stability.

Fox EQ 4.32kWh HV Battery (Slave) #2: FE-HV-EQS-4300 Fox EQ 4300 Datasheet Fox EQ 4300 Manual Fox EQ4300 Warranty Fox Battery Sizing Guide Fox EQ - High Voltage Battery (Slave) Fox EQ is a high-performance, scalable battery storage system. With this modular design's flexibility, it is suitable for a variety of storage requirements. Additional batteries can be installed in series, allowing for a maximum storage capacity of 30.24kWh. Installation is easy, with a plug and play solution that can save valuable time for installers.  Don't forget: You must register your install with Fox online to activate the 12 year product warranty, otherwise it's 5 years as standard Features 4.32kWh Capacity Scalable to 30.24kWh 90% Depth of Discharge Wide Temperature Tolerance Easy Installation CAN/RS485 Communication High Voltage Specs Weight: 37 kg Battery Type: Lithium Ion Nominal Energy: 4,145 Wh Depth of discharge: 90.00 % Voltage: 57 V Continuous Discharge Rate (Normal Use): 2,875 W Maximum Discharge Rate (5 Minutes): 2,875 W Surge Discharge Rate (15 Seconds): 3,737 W Maximum Charge Rate (5 Minutes): 2,875 W Remember: In order to activate the extended warranty to 12 years, please register your install with Fox online, otherwise it's 5 years as standard. Please click here for registration page. Please check the warranty document for more information. This battery requires a MINIMUM of 2 modules to work (Master + Slave), This battery can have a MAXIMUM of 7 modules in a stack (1x Master + 6x Slaves)    

GivEnergy Commercial SME AIO 120A CT #2: GIV-COM-CT-120 Display - Current Sensor Clamps  GivEnergy Commercial Product Brochure GivEnergy Commerical AIO Warranty CT Clamp – 12A / 0.4A Split Core Current Transformer Ensure accurate current monitoring with this high-quality CT clamp, designed for ease of installation and reliable performance. With its split-core design, it allows for simple retrofitting without the need to disconnect existing cables, making it ideal for both residential and commercial applications. Perfect for monitoring energy usage, managing loads, and integrating with monitoring systems, this CT clamp is built to deliver precise readings while maintaining durability. Key Features Split-Core Design – easy installation without cable disconnection Accurate Measurement – rated for 12A primary, 0.4A secondary Durable Build – engineered for reliable long-term use Flexible Application – suitable for energy monitoring and system optimisation Multiple Options Available – other sizes available on request Technical Specifications Primary Rating: 12A Secondary Rating: 0.4A Hole Dimensions: 36.1mm (outer width) / 15.7mm (inner width) Internal Height: 16.3mm Overall Dimensions: 46.8mm × 32.3mm (H × D) 📦 CT Clamp Information Most CT clamps are supplied as split core for easier fitment. CT clamps must be rated to the maximum current of the monitored cable (typically the rating of the protective device). For best accuracy, select a CT clamp sized as closely as possible to the rated supply and ensure a tight fit around the cable or bus bar. Many other sizes are available on request.  

Fox EQ HV EQ4800-L2, 9.32kWh 1x Master 1x Slave #2: FE-HV-EQ-2-4.8-9.6 Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty   Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, scalable battery storage system designed for both residential and commercial energy applications. Its modular design allows for flexible system expansion, making it ideal for a broad range of storage needs. Additional modules can be added to achieve a maximum storage capacity of 41.94 kWh. Warranty Reminder: To activate the full 12-year product warranty, you must register your installation with Fox online. Otherwise, the standard warranty is 5 years. Fox EQ4800 4.66kWh Stack of 2 – 9.32kWh Useable Storage This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 1 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Quick and easy setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable performance in diverse environments Advanced Communication: CAN/RS485 connectivity for smart energy systems High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 83.5 kg Rated Power: 4,800 W Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 9,320 Wh Depth of Discharge: 90% Voltage: 89 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 386 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure new battery modules match existing Energy Cube stacks Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 is a modular, high-performance energy storage solution, perfect for homeowners and businesses seeking reliable, scalable solar storage in the UK. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L3, 13.98kWh 1x Master 1x Slave #2: FE-HV-EQ-3-4.8-14.4 Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, scalable battery storage solution designed for both residential and commercial energy applications. Its modular design allows for maximum flexibility, making it suitable for a broad range of storage needs. Additional battery modules can be added to reach a maximum storage capacity of 41.94 kWh. Warranty Reminder: Register your installation with Fox online to activate the 12-year product warranty. Without registration, the standard warranty is 5 years. Fox EQ4800 4.66kWh – Stack of 3 (13.98kWh Useable Storage) This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 2 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Easy and fast setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable performance in diverse environments Advanced Communication: CAN/RS485 connectivity for smart energy management High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 125.5 kg Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 13,980 Wh Depth of Discharge: 90% Voltage: 134 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 524 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure any added battery modules match your existing Energy Cube stack Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 Stack of 3 is an ideal solution for scalable, high-performance solar storage, providing reliable, expandable energy for homes and businesses in the UK. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L4, 18.64kWh 1x Master 3x Slave #2:  FE-HV-EQ-4-4.8-19.2  Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, modular battery storage solution designed for residential and commercial energy applications. Its scalable design allows maximum flexibility, enabling additional modules to increase storage capacity up to 41.94 kWh. Warranty Reminder: Register your installation with Fox online to activate the 12-year product warranty. Without registration, the standard warranty is 5 years. Fox EQ4800 4.66kWh – Stack of 4 (18.64kWh Useable Storage) This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 3 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are fully compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Quick and easy setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable in various climates Advanced Communication: CAN/RS485 connectivity for intelligent energy management High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 166.5 kg Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 18,640 Wh Depth of Discharge: 90% Voltage: 179 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 622 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure any added modules match your existing Energy Cube stack Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 Stack of 4 is ideal for homeowners or businesses seeking a scalable, high-performance solar battery storage solution with reliable performance and expandability. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.

Fox EQ HV EQ4800-L5, 23.3kWh 1x Master 4x Slave #2:  FE-HV-EQ-5-4.8-24.0  Storage Systems - Li-ion Battery Pack Fox EQ4800-Datasheet Fox EQ4800 Manual Fox Product Compatibility Fox EQ4800 Warranty Fox EQ4800 High-Performance Scalable Battery Storage System The Fox EQ4800 is a high-performance, modular battery storage solution designed for residential and commercial energy applications. Its scalable design allows maximum flexibility, enabling additional modules to increase storage capacity up to 41.94 kWh. Warranty Reminder: Register your installation with Fox online to activate the 12-year product warranty. Without registration, the standard warranty is 5 years. Fox EQ4800 4.66kWh – Stack of 5 (23.3kWh Useable Storage) This kit includes: 1 x Fox EQ4800 4.66kWh HV Battery (Master) – FE-HV-EQM-4800 4 x Fox EQ4800 4.66kWh HV Battery (Slave) – FE-HV-EQS-4800 Compatibility: EQ4800 modules are fully compatible with ECS-4800 batteries. Key Features Plug-and-Play Installation: Quick and easy setup Battery Capacity: 4.66 kWh per module Scalable Design: Expandable up to 41.94 kWh Depth of Discharge: 90% for maximum usable energy Wide Temperature Tolerance: Reliable in various climates Advanced Communication: CAN/RS485 connectivity for intelligent energy management High Voltage Operation: Supports faster charging and discharging Technical Specifications Weight: 208 kg Battery Type: Lithium-Ion (LiFePO4) Nominal Energy: 23,300 Wh Depth of Discharge: 90% Voltage: 224 V Continuous Discharge Rate (Normal Use): 2,240 W Maximum Discharge Rate (5 Minutes): 4,480 W Surge Discharge Rate (15 Seconds): 5,785 W Maximum Charge Rate (5 Minutes): 4,480 W Dimensions (W x H x D): 570 x 800 x 380 mm Installation Notes Minimum Modules Required: 2 (1 Master + 1 Slave) Maximum Stack: Up to 9 modules (1 Master + 8 Slaves) Compatibility: Ensure any added modules match your existing Energy Cube stack Professional Installation: Must be installed by a qualified electrician ✅ The Fox EQ4800 Stack of 5 is ideal for homeowners or businesses seeking a scalable, high-performance solar battery storage solution with reliable performance and expandability. Please note: In order to increase the product warranty from 5 to 12 years you must register your install with Fox online to activate the 12 year warranty, otherwise it's 5 years as standard. Please click here for registration page. You can review the warranty document for more information.