Flower Turbine Shop

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 10 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   1M Tulip Turbine Datasheet 1M Tulip Turbine Installation Guide   1.15 m Flower Tulip Wind Turbine The 1.15 m Flower Tulip Turbine is a compact vertical-axis wind turbine designed for both off-grid and grid-connected applications. Standing at approximately 1.5 m high, it integrates advanced electronics to charge 12 V, 24 V, or 48 V battery systems, or to connect to the grid when deployed in larger multi-turbine “bouquet” configurations. Mounted on a fixed pole, the Flower Tulip is ideal for: Off-grid applications such as outdoor lighting, signage, and small displays Hybrid wind-and-solar systems, where it supplements solar generation during low-light and winter conditions Scalable bouquet installations, delivering significantly higher output through the patented Bouquet Effect The turbine is supplied as standard in white and is engineered for long-term durability in demanding environments. Key Features Vertical Axis Wind Turbine (VAWT) design for omni-directional wind capture Ultra-low cut-in wind speed for generation in light winds Bouquet Effect technology increases output when turbines are grouped and correctly oriented Suitable for off-grid, hybrid, or grid-connected systems Quiet operation with a visually appealing, architectural form Technical Specifications General Model: FT 1.15M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 100 W (reached at 14.5 m/s / 32.4 mph) Design Life: 40 years (annual inspection required) Warranty: 5 years on Flower Turbines components Third-party components covered by their respective manufacturers Dimensions & Weight Turbine Diameter / Width: 0.55 m (1.79 ft) Blade Height: 1.15 m (3.77 ft) Total Height: 1.4 m (4.58 ft) Weight: ≈20 kg (44.1 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter or charge controller Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Output (Single Turbine): ≈62.2 W at 12 m/s (27 mph) Bouquet Effect Gain: ≈25% additional output per turbine when correctly oriented Example: 4-turbine bouquet → ~100% output increase (double power) 5-turbine bouquet → ≈144.7 W per turbine Total output: ≈723.5 W at 12 m/s Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated within generator Battery Charging: 12 V / 24 V / 48 V systems Grid-Tied Output: 110 V or 220 V (dependent on country and inverter selection) Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F)

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 10 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   2M Tulip Turbine Datasheet 2M Tulip Turbine Installation Guide   FT 2M-Lite Flower Turbine The FT 2M-Lite Flower Turbine is a visually striking, medium-scale vertical-axis wind turbine designed for commercial, micro-grid, and hybrid solar-wind applications. Standing just over 3 metres (≈9.8 ft) tall, it delivers reliable wind generation in compact spaces where traditional turbines are unsuitable. Manufactured in the United States, the FT 2M-Lite combines architectural design with high performance and long-term durability. It can be installed: On structurally suitable flat roofs (subject to civil/structural engineer approval) On the ground using a concrete foundation and pole mount A battery is not included, allowing flexibility to integrate with existing or bespoke energy storage systems. Ideal Applications Supplementary wind generation alongside commercial or residential solar PV Hybrid solar-wind systems for improved year-round generation Micro-grids and off-grid projects Sites where wind complements solar output during low-light or winter conditions Thanks to Flower Turbines’ patented Bouquet Effect, installing multiple turbines together significantly increases total output—meaning the more turbines deployed, the greater the collective performance. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Extremely low cut-in wind speed for generation in light winds Bouquet Effect technology delivering substantial performance gains in clustered installations Quiet operation with an architectural, visually appealing design Suitable for grid-tied or off-grid systems Technical Specifications General Model: FT 2M-Lite Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 500 W (reached at ≈11 m/s / 25 mph) Design Life: 40 years (annual inspection required) Dimensions & Weight Blade Height: 2.0 m (6.56 ft) Blade Diameter: 1.18 m (3.85 ft) Total Height: 3.008 m (9.87 ft) Total Weight: ≈227 kg (501 lbs) Ground Pole Mount: Diameter: 0.1 m (0.33 ft) Length: 2.44 m (8 ft) Weight: 30 kg (66 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled electronically via inverter/charge controller Braking: Electrical brake system Additional mechanical brake Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Production (Single Turbine): ≈622 W at 12 m/s (27 mph) Bouquet Effect Performance: 25%–228% output increase per turbine when correctly oriented Example – Bouquet of 5: ≈1.147 kW per turbine ≈5.7 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 240 VAC / 1-phase / 60 Hz 230 VAC / 1-phase / 50 Hz Materials & Environmental Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered under their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   3M Tulip Turbine Datasheet 3M Tulip Turbine Installation Guide   3-Metre Flower Tulip Wind Turbine Our 3-Metre Flower Tulip Turbines deliver a robust, high-performance wind energy solution in a compact, visually striking design. Suitable for homes, commercial buildings, and community installations, these turbines can be installed either at ground level or on structurally suitable flat roofs. Thanks to Flower Turbines’ patented Bouquet Effect, performance increases as turbines are installed together—meaning each turbine produces more energy when operating as part of a cluster. The standard finish is white, blending seamlessly into both urban and architectural environments. Designed for Optimal System Sizing The 3-metre turbine has been engineered so that five units pair optimally with a 5 kW inverter. This ensures: Balanced system design Maximum usable energy output Efficient inverter utilisation This makes the 3M Tulip an excellent choice for modular, scalable wind installations. Strong-Roof & Ground Installation Ready With its 3-metre blade height and reinforced design, the 3M Tulip is specifically suited for stronger roof structures where additional load capacity is available. It is equally effective when installed at ground level using a metal base fixed to concrete foundations. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Ultra-low cut-in wind speed for generation in light wind conditions Bouquet Effect technology delivering significantly higher output in clustered installations Quiet operation with an architectural, visually appealing form Suitable for grid-tied or hybrid energy systems Technical Specifications General Model: FT 3M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 1,000 W (reached at ≈11 m/s / 25 mph) Design Life: 40 years (annual inspection required) Dimensions & Weight Blade Height: 3.0 m (9.84 ft) Turbine Diameter (both blades attached): 1.8 m (5.91 ft) Total Height: 4.07 m (13.35 ft) Total Weight: ≈400 kg (882 lbs) Ground Mount: Metal base for secure attachment to concrete foundations Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by charge controller (braking begins at ~12 m/s) Mechanical brake supplied Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Production (Single Turbine): ≈1,400 W at 12 m/s (27 mph) Bouquet Performance (Example – 5 Turbines): ≈3 kW per turbine ≈15 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 240 VAC / single-phase / 60 Hz 230 VAC / single-phase / 50 Hz Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   5M Tulip Turbine Datasheet 5M Tulip Turbine Installation Guide   FT 6M Flower Tulip Wind Turbine Commercial-Scale Wind Power for High-Demand Sites Our largest and most powerful Flower Tulip turbine, featuring a 5-metre blade height, is engineered to deliver serious commercial-scale wind generation. Designed for high-energy users, the FT 6M is ideal for projects where performance, reliability, and long-term ROI are critical. This turbine is purpose-built to power large commercial and infrastructure assets, including: Shopping centres & retail parks Data centres Schools & universities Municipal buildings Warehouses & logistics hubs Airports Farms & agri-industrial sites And more High Output, Exceptional Value If you’re looking for up to 5 kW per turbine — and significantly more when deployed in a bouquet — this is the solution. The FT 6M is our most cost-effective Flower Tulip when measured by output per unit, making it ideal for scalable commercial installations. Standard colour is white, providing a clean, architectural finish suitable for both urban and industrial environments. Installation Options The FT 6M is designed for: Ground-mounted installation Very strong roof structures (subject to structural and civil engineering approval) Its robust construction and braking systems make it suitable for exposed and demanding sites. Key Features 2-bladed Vertical Axis Wind Turbine (VAWT) for omni-directional wind capture Ultra-low cut-in wind speed for generation in light winds Bouquet Effect technology, delivering substantial output increases in clustered installations Designed for commercial, municipal, and infrastructure-scale energy systems Quiet operation with an iconic, architectural form Technical Specifications General Model: FT 6M Turbine Type: 2-Bladed Vertical Axis Wind Turbine IEC Turbine Class: IEC 61400 Class IV Rated Power: 5 kW (reached at ≈11.5 m/s / 25.7 mph) Design Life: 20 years (annual inspection required) Dimensions & Weight Blade Height: 5.0 m (16.4 ft) Total Height: 6.0 m (19.7 ft) Turbine Diameter: 2.5 m (8.2 ft) Total Weight: ≈1,000 kg (2,205 lbs) Performance Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled via inverter or charge controller Electrical braking system Mechanical and manual braking included as required Maximum Survival Wind Speed: 54 m/s (120.8 mph) Expected Output (Single Turbine): ≈5.39 kW at 12 m/s (26.8 mph) Bouquet Performance: 25%–228% output increase per turbine when correctly oriented Example – Bouquet of 5: ≈12.5 kW per turbine ≈62.5 kW total output at 12 m/s (27 mph) Electrical & Generator Generator: High-efficiency permanent magnet generator Bearings: Integrated generator bearings plus secondary shaft bearings Grid-Tied Output Options: 230 VAC / 3-phase / 60 Hz 110 VAC / 3-phase / 50 Hz Materials & Environment Blade Material: Thermoplastic Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 3 meters total height. Blades are 2 meters high and 1.7 meters in diameter. They come with a generator rated at 1,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 5 meters total height. Blades are 4 meters high and 1.7 meters in diameter. They come with a generator rated at 2,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 8 meters total height. Blades are 7 meters high and 1.7 meters in diameter. They come with a generator rated at 5,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties

Exclusively available to installers, EPC contractors and commercial clients for medium to large scale commercial projects only.  Lead time:  2-3 months from ordering Minimum order quantity: 5 ITS is proud to be UK representatives for the medium to large scale commercial market for Flower Turbines.  Flower Turbines is the global leader in high-performance vertical axis wind turbines (VAWTs). ITS support EPC contractors, renewable energy installers, developers, and commercial organisations in integrating Flower Turbines’ innovative wind systems into  projects across the UK. Whether you are enhancing an existing solar installation or designing a new multi-technology renewable system, Flower Turbines delivers a unique combination of efficiency, elegance, and outstanding performance—especially where traditional wind and solar solutions face limitations. Additional information and technical specifications available on the Flower Turbines website.  The Cluster Effect – Maximum Output From Minimal Space One of the most powerful advantages of Flower Turbines is the Cluster (Bouquet) Effect.Most wind turbines experience performance losses when installed close together. Flower Turbines do the opposite. With four turbines positioned together producing more than eight turbines separately.   AL13 Turbine Datasheet AL13 Turbine Installation Guide   AL13 Power Tower Modular, Cost-Effective Vertical Wind Energy The AL13 Power Tower product line is the most cost-efficient wind solution in the Flower Turbines portfolio, making it an ideal choice for budget-conscious commercial and community projects without compromising performance. Designed for on-site assembly using standard professional tools, the Power Tower is easy to transport and install. Larger stacks may require a small crane. Each tower is built from 1-metre modular sections, allowing flexible system heights and scalable output. Modular Design & Superior Wind Capture Power Towers feature anodised aluminium blades stacked at alternating 90-degree angles, enabling exceptional wind capture from all directions. This configuration allows the turbine to start generating at even lower wind speeds than the Flower Tulip range, while benefiting from the same internal aerodynamic advancements and patented Bouquet Effect when deployed in groups. Standard stacks are supplied in 2, 4, 6, or 8-module configurations, with 8 modules offering the best economy of scale. Custom stack heights of 3, 5, or 7 modules are available on request (not included in standard online packages), although balanced stacking in even multiples is recommended for most installations. Stabilisation & Structural Requirements Stacks of 4 modules or more require a stabiliser pole, fitted with an upper bearing for long-term reliability One stabiliser pole can support up to two Power Tower stacks All bearings require annual inspection Electronics & Performance Optimisation 6- or 8-module stacks are supplied with: 5 kW electronics for low-wind areas 10 kW electronics for higher-wind locations Generator sizing is selected based on stack height, wind conditions, and bouquet configuration These wind turbines are around 9 meters total height. Blades are 8 meters high and 1.7 meters in diameter. They come with a generator rated at 10,000 watts, and a charge controller. Key Features Modular vertical-axis wind turbine (VAWT) design Ultra-low cut-in wind speed Aluminium blades shipped flat for efficient transport Excellent performance in low and variable wind environments Scalable for standalone or bouquet installations One of the most cost-effective wind solutions per kW installed Technical Specifications General Model: FT AL13 Power Tower Turbine Type: Modular 2-Bladed Vertical Axis Wind Turbine Module Height: 1.0 m per section Recommended Configurations: 2, 4, 6, or 8 modules IEC Turbine Class: IEC 61400 Class IV Design Life: 20 years (annual inspection required) Power & Performance Rated Power: 1 kW (2-module stack) Up to 5 kW (8-module stack) Expected Output per Module: ≈350 W at 12 m/s Bouquet Effect: ≈25% output increase per turbine when grouped and correctly oriented Grid-Tied Output: 120 V / 240 V Generator & Bearings Generator: High-efficiency permanent magnet generator Available Generator Sizes: 3 kW, 5 kW, or 10 kW Bearings: Integrated generator bearings Secondary shaft bearings Upper bearing required for stabiliser pole systems Dimensions & Weight Blade Diameter: 1.7 m (5.58 ft) Module Height: 1.0 m (3.28 ft) Total Height (Examples): 4 modules: ≈4.95 m (16.25 ft) 6 modules: ≈6.95 m (22.8 ft) Approximate Weight (excluding generator): 2 modules: ≈336 kg (740 lb) 4 modules: ≈462 kg (1,019 lb) 6 modules: ≈557 kg (1,228 lb) 8 modules: ≈654 kg (1,442 lb) Materials & Environment Blade Material: Anodised aluminium Base Material: A36 steel Cut-In Wind Speed: 0.7 m/s (1.57 mph) Cut-Out Wind Speed: Controlled by inverter/charge controller with electrical braking Mechanical Brake: Included Maximum Survival Wind Speed: 54 m/s (120.8 mph) Operating Temperature Range: −15 °C to +50 °C (5 °F to 122 °F) Warranty 10-year warranty on components manufactured by Flower Turbines Third-party components covered by their respective manufacturers’ warranties