GSE In-Roof Screws for Fixing Hooks 3.5x25mm A2
$1.00 + VAT
GSE Landscape Middle Clamp with EPDM - Black
#2: 7888 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Screws for GSE in-roof fixing hooks.
GSE Reference: ART106905
GSE Landscape Middle Clamp with EPDM - Black
$4.00 + VAT
GSE Landscape Middle Clamp with EPDM - Black
#2: 7870 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Middle Clamps for the GSE Landscape in-roof system. Compatible with modules of thickness 30-32mm.
This clamp comes with an EPDM seal.
GSE Reference: ART106723
GSE Landscape Bottom End Clamp with EPDM - Black
$4.00 + VAT
GSE Landscape Bottom End Clamp with EPDM - Black
#2: 7869 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Top End Clamps for the GSE Landscape in-roof system. Compatible with modules of thickness 30-32mm.
This clamp comes with an EPDM seal.
GSE Reference: ART106919
GSE Landscape Top End Clamp with EPDM - Black
$3.00 + VAT
GSE Landscape Top End Clamp with EPDM - Black
#2: 7868 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Top End Clamps for the GSE Landscape in-roof system. Compatible with modules of thickness 30-32mm.
This clamp comes with an EPDM seal.
GSE Reference: ART106919
GSE Landscape Top Junction Flashing Black
$24.00 + VAT
GSE Landscape Top Junction Flashing Black
#2: 7866
GSE Landscape Manual
GSE MCS
Minimum order - 4
Top junction flashing for the GSE Landscape in-roof system. Used to overlap and join together the top centre flashings.
Colour: Black
GSE Reference: ART106436
GSE Landscape Top Left Flashing Black
$49.00 + VAT
GSE Landscape Top Left Flashing Black
#2: 7865
GSE Landscape Manual
GSE MCS
Minimum order - 4
Top left flashing for the GSE Landscape in-roof system. Used to cover the top right corner.
Colour: Black
GSE Reference: ART106450
GSE Landscape Top Right Flashing Black
$49.00 + VAT
GSE Landscape Top Right Flashing Black
#2: 7858
GSE Landscape Manual
GSE MCS
Minimum order - 4
Top right flashing for the GSE Landscape in-roof system. Used to cover the top right corner.
Colour: Black
GSE Reference:ART106443
GSE Landscape Top Centre Flashing Black
$24.00 + VAT
GSE Landscape Top Centre Flashing Black
#2: 7855 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Top centre flashing for the GSE Landscape in-roof system.
Colour: Black
GSE reference: ART106429
GSE Landscape Lateral Flashing Black
$26.00 + VAT
GSE Landscape Lateral Flashing Black
#2: 7841 Mounting - In Roof
GSE Landscape Manual
GSE MCS
Lateral flashing for the GSE Landscape in-roof system. Used to cover the sides of the array. Lateral flashings must overlap by 150mm.
GSE Reference: ART106114
GSE Landscape 1760-1090 (Half Frame - 2 per panel)
$37.00 + VAT
GSE Landscape 1760-1090
#2: 7841 Mounting - In Roof
GSE Landscape Data Sheet
GSE Landscape Manual
GSE MCS
The GSE Integration Half Frame Tray system offers a fast, secure, and professional solution for integrated solar PV roof installations. Designed for quick assembly and long-term durability, each module consists of two interlocking half-frame tray sections that create a weatherproof mounting platform directly within the roof structure.
Please Note:This listing is for one half-frame tray only. Two halves are required per solar panel/module installation.
Fast & Simple Roof-Integrated Solar Installation
The GSE in-roof mounting system is engineered for rapid installation and a clean, low-profile finish. Lightweight interlocking plastic trays are fixed directly to roof battens, allowing roof tiles to fit neatly up to the integrated flashing system for a sleek, weather-resistant appearance.
Once installed, solar panels simply hook onto the trays and are securely clamped into position, significantly reducing installation time compared to traditional mounting systems.
Ideal for:
Residential solar installations
New build solar projects
Retrofit roof-integrated PV systems
MCS-compliant solar installations
Flexible Panel Compatibility
We stock a range of popular tray sizes suitable for many modern solar modules, with additional sizes available to order.
Compatible Solar Panel Dimensions
Supported Module Sizes
Minimum Panel Length: 1761mm
Maximum Panel Length: 1765mm
Minimum Panel Width: 1090mm
Maximum Panel Width: 1150mm
Please refer to the "Tell Me More" section for full panel tolerance information.
Key Features
Quick-fit interlocking tray system
Lightweight construction: only 2.8–3.7kg/m²
Suitable for roof pitches from 12° to 60°
Professional low-profile integrated finish
Compatible with a wide range of solar panels
MCS certified
Durable and weather-resistant design
Simplifies solar panel installation
Reduces installation time and labour costs
Product Specifications
Specification
Details
Product Number
ART106310
Weight
2.8–3.7kg/m²
Roof Pitch Compatibility
12°–60°
Certification
KIWA00041/011 IK
Installation Type
Roof-Integrated Solar PV
Material
High-durability engineered plastic
Perfect for installers and roofing professionals looking for a reliable, MCS-compliant in-roof solar mounting solution with fast installation and excellent aesthetics.
GSE Landscape 1765-1090 (Half Frame - 2 per panel)
$37.00 + VAT
GSE Landscape 1765-1090
#2: 7842 Mounting - In Roof
GSE Landscape Data Sheet
GSE Landscape Manual
GSE MCS
The GSE Integration Half Frame Tray system offers a fast, secure, and professional solution for integrated solar PV roof installations. Designed for quick assembly and long-term durability, each module consists of two interlocking half-frame tray sections that create a weatherproof mounting platform directly within the roof structure.
Please Note:This listing is for one half-frame tray only. Two halves are required per solar panel/module installation.
Fast & Simple Roof-Integrated Solar Installation
The GSE in-roof mounting system is engineered for rapid installation and a clean, low-profile finish. Lightweight interlocking plastic trays are fixed directly to roof battens, allowing roof tiles to fit neatly up to the integrated flashing system for a sleek, weather-resistant appearance.
Once installed, solar panels simply hook onto the trays and are securely clamped into position, significantly reducing installation time compared to traditional mounting systems.
Ideal for:
Residential solar installations
New build solar projects
Retrofit roof-integrated PV systems
MCS-compliant solar installations
Flexible Panel Compatibility
We stock a range of popular tray sizes suitable for many modern solar modules, with additional sizes available to order.
Compatible Solar Panel Dimensions
Supported Module Sizes
Minimum Panel Length: 1761mm
Maximum Panel Length: 1765mm
Minimum Panel Width: 1090mm
Maximum Panel Width: 1150mm
Please refer to the "Tell Me More" section for full panel tolerance information.
Key Features
Quick-fit interlocking tray system
Lightweight construction: only 2.8–3.7kg/m²
Suitable for roof pitches from 12° to 60°
Professional low-profile integrated finish
Compatible with a wide range of solar panels
MCS certified
Durable and weather-resistant design
Simplifies solar panel installation
Reduces installation time and labour costs
Product Specifications
Specification
Details
Product Number
ART106310
Weight
2.8–3.7kg/m²
Roof Pitch Compatibility
12°–60°
Certification
KIWA00041/011 IK
Installation Type
Roof-Integrated Solar PV
Material
High-durability engineered plastic
Perfect for installers and roofing professionals looking for a reliable, MCS-compliant in-roof solar mounting solution with fast installation and excellent aesthetics.
*Strip of 11* GSE EPDM Rubber Seal
$2.00 + VAT
*Strip of 11* GSE EPDM Rubber Seal
#2: 4187 Mounting - In Roof
GSE Integration Kit Data Sheet
GSE In Roof System Installation Manual
CE Declaration of Conformity
EPDM Rubber seal to accompany the screw and washer for clamp fixing required to hold down the end clamps for fixing solar panels onto GSE roof integrated solar PV frames.Made from ethylene propylene diene monomer rubber
1m Red & Black 50mm Battery Cable
$58.00 + VAT
1m Red & Black 50mm Cable
Cable Pack & Accessories for Keto Fuse Connector
This cable pack is designed for use with a Keto fuse connector (sold separately), providing all the essential wiring components to ensure a safe and reliable connection. Ideal for solar, battery, or inverter setups.
Package Includes:
1 × BATCAB35-1M – 1m 50mm² Black Cable
1 × BATCAB35-1M-RED – 1m 50mm² Red Cable
Features:
Complete Cable Kit: Everything needed for a proper Keto fuse connection.
High-Quality Components: Heavy-duty cables and lugs for durability and safety.
Easy Installation: Pre-cut cables and pre-sized lugs simplify the setup process.
Ensure your battery or inverter installation is safe, compliant, and hassle-free with this ready-to-use cable pack.
Solis 6kW S6 | Dyness G2 10.24kWh battery | Cambridge
Example Battery Storage Installation – Solis & Dyness System
This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here.
Our customer’s projected saving is around £570 per year, delivering a payback period of just under 7 years when charging from Octopus cheap night-time electricity. This demonstrates how battery storage can significantly cut household energy bills and increase self-sufficiency.
Why Choose a Battery Storage System Like This?
By pairing a Solis 6kW S6 hybrid charger with Dyness G2 10.24kWh batteries, homeowners can optimise their energy usage, reduce grid reliance, and maximise savings. Charging during off-peak tariffs allows stored energy to be used during the day, lowering overall electricity costs.
System Specification
Inverter/Charger: Solis 6kW S6 hybrid charger
Battery Storage: Dyness 10.24kWh lithium batteries
Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.
Tigo TS4-X-O Optimiser - optimise only the panels impacted by shading
$77.00 + VAT
Tigo TS4-X-O Optimiser
#3: 27193
Tigo TS4-X-O Data Sheet
Tigo Optimiser Installation Manual
Tigo Optimiser Warranty
Tigo TS4-X-O Quick Guide
Tigo TS4-X-O Solar Optimiser
The Tigo TS4-X-O Solar Optimiser is a flexible and cost-effective module-level power optimiser designed to improve the performance of solar PV systems affected by shading, panel mismatch, or multiple roof orientations. Compatible with virtually all standard solar panels and most string or hybrid inverters, the TS4-X-O offers intelligent optimisation without the need to optimise every panel in the system.
Unlike traditional optimiser systems, the Tigo TS4-X-O supports partial deployment, allowing installers to optimise only the panels impacted by shading or installed on separate roof aspects. Optimised and non-optimised modules can operate together within the same string, reducing overall system costs while maximising energy generation where it matters most.
Designed for fast installation, the optimiser clips securely onto the solar panel frame and connects easily using standard MC4 connectors.
Key Benefits
Module-level optimisation for improved solar performance
Ideal for shaded panels or split roof orientations
Partial optimisation supported – optimise only the required modules
Compatible with most standard string and hybrid inverters
Allows optimised and non-optimised panels within the same string
Fast installation with integrated MC4 connectors
Compact, lightweight, and highly reliable design
Supports mixed PV module types within one system
Technical Specifications
Rated DC Input Power: 800W
Maximum Input Voltage: 80V
Maximum Continuous Input Current (IMAX): 20A
Maximum VOC @ STC: 80V
Weight: 520g
Connection Type: MC4
Warranty: Up to 25 Years*
Inverter Compatibility
The Tigo TS4-X-O is compatible with most standard string inverters and hybrid inverters. It is not compatible with SolarEdge or Huawei inverter systems, as these platforms use proprietary optimiser technology.
Warranty Information
The Tigo TS4-X-O includes a 25-year limited warranty when connected to an internet-enabled monitoring system throughout the warranty period. Unmonitored optimisers include a standard 5-year warranty.
Ideal Applications
Solar systems with partial shading
East/West split roof installations
Mixed panel orientations
Retrofitting optimisation onto existing PV systems
Commercial and residential solar installations requiring selective optimisation
Please ensure installation guidelines and deployment rules are followed when mixing optimised and non-optimised modules within the same string.
SolaX Triple Power HS36 3.6kWh Battery | 12yr Warranty
$1,021.00 + VAT
SolaX Triple Power HS36 3.6kWh Battery
#3/5/22: 6760
SolaX HS25/HS36 Datasheet
SolaX HS25/HS36 Installation Manual
SolaX Triple Power HS36 3.6kWh Battery Module
The SolaX Triple Power HS36 3.6kWh Battery Module is a high-performance, modular lithium battery designed for scalable residential and commercial solar energy storage systems. Built using advanced lithium iron phosphate (LFP) cell technology, the HS36 delivers exceptional safety, reliability, and long-term performance while supporting flexible system expansion as energy demands grow.
Designed for seamless stacking installation, the HS36 battery module can be configured in systems ranging from 7.3kWh up to 47.9kWh using between two and thirteen battery modules. Combined with the SolaX MCS0800 Battery Management System and HS25/HS36 kit and base, it forms part of the advanced T-BAT-SYS-HV-S3.6 high-voltage battery storage platform.
Featuring integrated battery heating technology, the HS36 maintains reliable performance even in low-temperature environments, making it ideal for year-round operation. Its modular plug-and-play design with pre-wired communication cables enables fast and straightforward installation, often by a single installer.
With a high 90% depth of discharge, over 6,000 charge cycles, IP65 protection, and remote diagnostic capability via compatible SolaX inverters, the HS36 is engineered for efficient, intelligent, and dependable energy storage.
Key Features & Benefits
3.6kWh modular high-voltage battery storage module
Advanced lithium iron phosphate (LFP) battery technology
Scalable system capacity from 7.3kWh to 47.9kWh
Compatible with SolaX MCS0800 BMS and HS25/HS36 system accessories
Supports up to 50A continuous charging and discharging current
Integrated battery heating technology for low-temperature operation
Soft-start function helps protect batteries and inverters from surge current
Modular stackable design for easy system expansion
Pre-wired communication cables for fast installation
Remote monitoring, diagnosis, and firmware updates via inverter
Long lifespan with over 6,000 charge/discharge cycles
Suitable for indoor and outdoor installation with IP65 protection
High usable capacity with 90% depth of discharge
Technical Specifications
Battery Capacity: 3.6kWh
Battery Chemistry: Lithium Iron Phosphate (LFP)
System Scalability: 2–13 Modules (7.3kWh–47.9kWh)
Continuous Charge/Discharge Current: 50A
Depth of Discharge (DoD): 90%
Cycle Life: 6,000+ Cycles
Ingress Protection: IP65
Dimensions: 510mm (L) × 365mm (W) × 152mm (H)
Weight: 33.5kg
Standard Warranty: 12 Years
Why Choose the SolaX HS36 Battery?
The SolaX Triple Power HS36 offers a future-proof energy storage solution with excellent scalability, long-term reliability, and advanced safety features. Its modular architecture makes it ideal for homeowners and businesses looking to start with a smaller battery system and expand capacity over time as energy usage increases.
Combining robust LFP battery chemistry, intelligent heating functionality, high cycle life, and simplified installation, the HS36 delivers dependable solar energy storage performance in a compact and installer-friendly design.
SolaX Triple Power HS25/HS36 Battery Management Unit | 12yr Warranty
$593.00 + VAT
SolaX Triple Power HS25/HS36 Battery Management Unit
#3 6765
SolaX HS25/HS36 Datasheet
SolaX HS25/HS36 Installation Manual
SolaX Triple Power HS25 / HS36 Battery Management System
The SolaX Triple Power HS25 / HS36 Battery Management System (BMS) is the intelligent control unit designed specifically for SolaX Triple Power TP-HS25 and TP-HS36 high-voltage battery storage systems. Engineered to optimise battery performance, safety, and communication, this advanced BMS ensures stable and efficient operation across your solar energy storage setup.
Acting as the central control hub for the battery system, the BMS continuously monitors battery performance, voltage balancing, charging, discharging, and overall system protection to maximise reliability and long-term lifespan.
Designed for seamless integration with SolaX hybrid inverter systems, the Triple Power BMS delivers dependable energy management for residential and commercial solar battery installations.
Key Features & Benefits
Compatible with SolaX Triple Power TP-HS25 and TP-HS36 battery systems
Intelligent battery management and system monitoring
Optimises battery charging and discharging performance
Enhances system safety, protection, and operational stability
Supports high-voltage solar battery storage configurations
Seamless integration with compatible SolaX hybrid inverters
Compact and installer-friendly design
Reliable long-term performance with a 12-year standard warranty
Technical Specifications
Compatibility: SolaX Triple Power TP-HS25 & TP-HS36 Batteries
Product Type: Battery Management System (BMS)
Dimensions: 482.5mm (W) × 173.5mm (H) × 153mm (D)
Weight: 7.5kg
Standard Warranty: 12 Years
Why Choose the SolaX Triple Power BMS?
The SolaX Triple Power Battery Management System is an essential component for maintaining the efficiency, reliability, and safety of your high-voltage battery storage system. By intelligently managing battery communication and performance, the BMS helps maximise usable energy capacity while protecting the system against abnormal operating conditions.
Ideal for residential and commercial solar storage installations, the SolaX HS25 / HS36 BMS delivers smart energy management and dependable long-term operation for advanced renewable energy systems.
Installed Sunsynk ACURE 3.6/5/7/8kW Hybrid | Fogstar Energy | ECO 2026 Version | Heating Element | Fire Suppression | Built-in Switchover | Ave £172/kW
from $6,159.00 + VAT
For all installations, our survey form is required to be completed along with the requested photo's & video's to ensure that we have all the required information to understand your project and check if additional work is required.
To view our full range of home battery storage packages visit our collection page here
To request a bespoke home battery storage quote please complete our quotes form
Nationwide Solar & Battery Installations Across the UK
We provide professional solar and battery storage installations nationwide across most areas of the UK. Every system is fully certified and installed by qualified engineers, giving you peace of mind and long-term reliability.
Sunsynk ACURE Data Sheet
Sunsynk ACURE Warranty
Fogstar 16.1kWh ECO Datasheet
Home Backup:
Option for 8kW inverter: Home backup is available by utilising the AC by-pass on the inverter together with the Gateway / EPS wiring. To add this to your order, following payment of the deposit, notify our team along with the requested information so the cabling route can be checked and can be added to your order without VAT.
Gateway / EPS wiring includes standard cable routes up to 10m. Difficult or longer cable routes require quoting for following submitting project details on our survey form.
Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)
Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation.
Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit.
Key Features & Benefits
Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly
Expandable System – Connect up to 10 wireless smart switches for tailored load control
Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board
Advanced Connectivity – Built-in Bluetooth, Wi-Fi, & LAN (Ethernet)
Real-Time Monitoring – Track generation, consumption, and battery performance
User-Friendly Interface – New intuitive UI for installers and end users
Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up
Multi-Colour LED Status Display – Instant system visibility
Built for Performance & Flexibility
The Sunsynk Acure hybrid inverter is available in:
Single-phase: 3.6kW – 8kW
Suitable for:
Solar PV systems
Battery storage installations
Wind turbine integration
EV charging systems
Hot water tank control
Fogstar Energy 48V 16.1kWh ECO
Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C
The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations.
Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands.
The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK.
Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value.
Key Benefits
✔ Fully Assembled – Ready to Install
Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution.
✔ Scalable Energy Storage
Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems.
✔ Long Lifespan Performance
• 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry
✔ Integrated Fire Suppression (2026 Upgrade)
An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety.
✔ Cold-Weather Charging to -10°C
Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces.
✔ Intelligent Battery Management
• Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance.
Includes CAN & RS485 communication for smooth integration.
✔ Real-Time Monitoring
Integrated LCD touchscreen display provides live system data and operational feedback.
✔ Commercial-Grade Value
High capacity, premium components, and advanced safety features at an exceptional cost per kWh.
Includes SOL-METER-1PH-EASTRON
535W Longi | Hi-MO X10 HVD Bi-Facial 60 cell | Black Frame | 30 Year Warranty | Minimum Order: 6
$105.00 + VAT
535W Longi Dual Cell Black Frame Solar Panel
6: LR7-60HVD-535M
Longi HVD Datasheet
Longi HVD Installation Manual
Longi HVD MCS
Minimum order for this panel: 6 panels
Due to size of the panels and size of the gap between the slats of the pallets (both length and width entries) a fork lift truck on site is required to offload these modules, or two people on site to offload manually.
For orders with no minimum, please visit our Single Panels page.
Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here].
Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here].
LONGi 535W Hi-MO X10 Bifacial Solar Panel – Black Frame (LR7-60HVD-535M)
Upgrade your solar installation with the LONGi 535W Hi-MO X10 Bifacial Solar Panel, delivering outstanding efficiency, enhanced energy yield, and long-term reliability. Manufactured by LONGi Solar, this high-performance module is engineered for residential, commercial, and large-scale solar projects looking to maximise return on investment.
High-Efficiency Bifacial Solar Technology
The LR7-60HVD-535M utilises advanced N-type HPBC 2.0 cell technology, combined with bifacial energy generation. This allows the panel to capture sunlight from both the front and rear surfaces, significantly increasing total energy output—especially in installations with reflective surfaces such as ground mounts or flat roofs.
Key Features of the LONGi 535W Bifacial Panel
535W High Power Output
Delivering excellent power density, this module reduces the number of panels required, lowering installation costs while maximising system performance.
Bifacial Energy Generation
Produces additional power from the rear side using reflected light, boosting overall yield compared to traditional monofacial panels.
Advanced HPBC 2.0 Cell Technology
Improves efficiency, reduces electrical losses, and enhances long-term reliability with cutting-edge back-contact cell design.
Sleek Black Frame Design
A modern, premium aesthetic ideal for visible rooftop installations without compromising durability.
Built for Harsh Conditions
Engineered to withstand high wind loads, heavy snow, and extreme temperatures, ensuring dependable performance in all environments.
Technical Specifications
Electrical Performance
Rated Power (Pmax): 535W
Module Efficiency: Up to 23.7%
Mechanical Details
Dimensions: 1990 × 1134 × 30 mm
Weight: 28 kg
Frame: Black aluminium frame
Cell Type: N-type HPBC 2.0
Operating Conditions
Temperature Range: -40°C to +85°C
High Mechanical Load Capacity: Suitable for demanding installations
30-Year Warranty & Long-Term Performance
Benefit from industry-leading reliability and peace of mind:
30-Year Product Warranty
30-Year Linear Power Output Warranty
Designed for minimal degradation and consistent performance, ensuring strong energy generation over decades.
Why Choose LONGi Solar?
LONGi Solar is globally recognised for innovation, quality, and bankability in solar manufacturing. The Hi-MO X10 series delivers:
Higher energy yields with bifacial technology
Proven long-term durability
Excellent performance in low-light conditions
Trusted by installers and EPCs worldwide
Ideal Applications
Residential rooftop solar systems
Commercial & industrial solar installations
Ground-mounted solar arrays
Battery storage integrated systems
High-efficiency, space-optimised projects
Order LONGi 535W Bifacial Solar Panels Online
The LONGi Hi-MO X10 535W Bifacial Solar Panel offers premium performance, superior efficiency, and long-term value—making it an ideal choice for installers, trade customers, and homeowners seeking maximum energy generation.
Sunsynk ACURE 3.6Kw | On & Off grid Hybrid solar & wind Inverter | 10yr Warranty
$1,048.00 + VAT
Sunsynk ACURE 3.6Kw On & Off grid Hybrid solar & wind Inverter WiFi Included
#5/20/22: SUNSYNK SUNC1−3.6LV01B
Sunsynk ACURE Data Sheet
Sunsynk ACURE Warranty
Sunsynk ACURE Manual
To view our full range of Sunsynk products visit our main Sunsynk page here
Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)
Warranty is applicable to 10 years when matched with a Sunsynk battery.
Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation.
Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit.
Key Features & Benefits
Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly
Expandable System – Connect up to 10 wireless smart switches for tailored load control
Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board
Advanced Connectivity – Built-in Bluetooth, Wi-Fi, & LAN (Ethernet)
Real-Time Monitoring – Track generation, consumption, and battery performance
User-Friendly Interface – New intuitive UI for installers and end users
Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up
Multi-Colour LED Status Display – Instant system visibility
Built for Performance & Flexibility
The Sunsynk Acure hybrid inverter is available in:
Single-phase: 3.6kW – 8kW
Three-phase: 5kW – 12kW
Suitable for:
Solar PV systems
Battery storage installations
Wind turbine integration
EV charging systems
Hot water tank control
Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability.
Smarter Installation, Cleaner Finish
Designed with installers in mind:
Wireless CT coil reduces cabling requirements
Hinged terminal cover for faster, safer access
Discreet cable routing for a clean, professional finish
IP65 rated – suitable for indoor & outdoor installation
Advanced Safety & Protection
Safety is at the core of the Sunsynk Acure system:
Arc Fault Detection (AFCI) – Reduces fire risk
Solar Panel Theft Detection – Alerts on tampering or disconnection
Rapid Shutdown Capability
Generator Compatibility – Dry contact start for backup power
Integrated Protections Include:
DC reverse polarity protection
AC overcurrent & overvoltage protection
Short circuit protection
Thermal protection
Ground fault & earth fault detection
Residual current (RCD) monitoring
Surge protection
Islanding protection
DC insulation monitoring
✔ G98 / G99 Compliant
Total Control with Sunsynk Connect Pro
Unlock full system visibility with Sunsynk Connect Pro:
Monitor energy usage in real time
Remote system control via mobile app
Installer remote commissioning & diagnostics
Multi-site fleet management for commercial users
Firmware updates over the air
Why Choose Sunsynk Acure?
All-in-one hybrid inverter + energy management system
Faster installs with wireless integration
Advanced safety and protection features
Scalable for homes, businesses, and commercial sites
Fully compatible with modern smart energy ecosystems
Perfect For
Homeowners reducing energy bills
Commercial energy optimisation
Solar + battery storage systems
Off-grid and backup power solutions
Smart energy and load management setups
Warranty & Support
Inverter Warranty: 10 years
61.4kWh HV Battery: 10 years
IP65 5.12kWh Battery: 5 years
CATL 5.12kWh Battery: 10 years
Warranty Conditions
UK-based installations are automatically covered
Proof of purchase from installer is required
Failure to provide proof of purchase may void warranty
Sunsynk ACURE 5Kw | On & Off grid Hybrid solar & wind Inverter | 10yr Warranty
$1,171.00 + VAT
Sunsynk ACURE 5Kw On & Off grid Hybrid solar & wind Inverter WiFi Included
#5/20/22: SUNSYNK SUNC1−5.0LV01B
Sunsynk ACURE Data Sheet
Sunsynk ACURE Warranty
Sunsynk ACURE Manual
To view our full range of Sunsynk products visit our main Sunsynk page here
Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)
Warranty is applicable to 10 years when matched with a Sunsynk battery.
Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation.
Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit.
Key Features & Benefits
Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly
Expandable System – Connect up to 10 wireless smart switches for tailored load control
Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board
Advanced Connectivity – Built-in Bluetooth, Wi-Fi, & LAN (Ethernet)
Real-Time Monitoring – Track generation, consumption, and battery performance
User-Friendly Interface – New intuitive UI for installers and end users
Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up
Multi-Colour LED Status Display – Instant system visibility
Built for Performance & Flexibility
The Sunsynk Acure hybrid inverter is available in:
Single-phase: 3.6kW – 8kW
Three-phase: 5kW – 12kW
Suitable for:
Solar PV systems
Battery storage installations
Wind turbine integration
EV charging systems
Hot water tank control
Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability.
Smarter Installation, Cleaner Finish
Designed with installers in mind:
Wireless CT coil reduces cabling requirements
Hinged terminal cover for faster, safer access
Discreet cable routing for a clean, professional finish
IP65 rated – suitable for indoor & outdoor installation
Advanced Safety & Protection
Safety is at the core of the Sunsynk Acure system:
Arc Fault Detection (AFCI) – Reduces fire risk
Solar Panel Theft Detection – Alerts on tampering or disconnection
Rapid Shutdown Capability
Generator Compatibility – Dry contact start for backup power
Integrated Protections Include:
DC reverse polarity protection
AC overcurrent & overvoltage protection
Short circuit protection
Thermal protection
Ground fault & earth fault detection
Residual current (RCD) monitoring
Surge protection
Islanding protection
DC insulation monitoring
✔ G98 / G99 Compliant
Total Control with Sunsynk Connect Pro
Unlock full system visibility with Sunsynk Connect Pro:
Monitor energy usage in real time
Remote system control via mobile app
Installer remote commissioning & diagnostics
Multi-site fleet management for commercial users
Firmware updates over the air
Why Choose Sunsynk Acure?
All-in-one hybrid inverter + energy management system
Faster installs with wireless integration
Advanced safety and protection features
Scalable for homes, businesses, and commercial sites
Fully compatible with modern smart energy ecosystems
Perfect For
Homeowners reducing energy bills
Commercial energy optimisation
Solar + battery storage systems
Off-grid and backup power solutions
Smart energy and load management setups
Warranty & Support
Inverter Warranty: 10 years
61.4kWh HV Battery: 10 years
IP65 5.12kWh Battery: 5 years
CATL 5.12kWh Battery: 10 years
Warranty Conditions
UK-based installations are automatically covered
Proof of purchase from installer is required
Failure to provide proof of purchase may void warranty
Sunsynk ACURE 8Kw | On & Off grid Hybrid solar & wind Inverter | 10yr Warranty
$1,892.00 + VAT
Sunsynk ACURE 8Kw On & Off grid Hybrid solar & wind Inverter WiFi Included
#5/20/22: SUNSYNK SUNC2−8.0LV01B
Sunsynk ACURE Data Sheet
Sunsynk ACURE Warranty
Sunsynk ACURE Manual
To view our full range of Sunsynk products visit our main Sunsynk page here
Sunsynk Acure Hybrid Inverter & Smart Energy Management System (3.6kW–12kW)
Warranty is applicable to 10 years when matched with a Sunsynk battery.
Take full control of your energy with the Sunsynk Acure, a next-generation hybrid inverter and smart energy management system designed for seamless power optimisation, advanced safety, and effortless installation.
Engineered for both residential and commercial solar installations, the Acure combines intelligent load management, integrated connectivity, and industry-leading protection features — all in one powerful, compact unit.
Key Features & Benefits
Smart Energy Management – Feature requires additional components and set up not offered by ITS Technologies directly
Expandable System – Connect up to 10 wireless smart switches for tailored load control
Up to 40A EPS Smart Switch – Critical loads can be wired to the EPS output via a sub-board
Advanced Connectivity – Built-in Bluetooth, Wi-Fi, & LAN (Ethernet)
Real-Time Monitoring – Track generation, consumption, and battery performance
User-Friendly Interface – New intuitive UI for installers and end users
Automatic Load Shedding – Prioritises essential loads during power outages with EPS set up
Multi-Colour LED Status Display – Instant system visibility
Built for Performance & Flexibility
The Sunsynk Acure hybrid inverter is available in:
Single-phase: 3.6kW – 8kW
Three-phase: 5kW – 12kW
Suitable for:
Solar PV systems
Battery storage installations
Wind turbine integration
EV charging systems
Hot water tank control
Whether upgrading an existing system or installing new, Acure delivers high efficiency, scalability, and long-term reliability.
Smarter Installation, Cleaner Finish
Designed with installers in mind:
Wireless CT coil reduces cabling requirements
Hinged terminal cover for faster, safer access
Discreet cable routing for a clean, professional finish
IP65 rated – suitable for indoor & outdoor installation
Advanced Safety & Protection
Safety is at the core of the Sunsynk Acure system:
Arc Fault Detection (AFCI) – Reduces fire risk
Solar Panel Theft Detection – Alerts on tampering or disconnection
Rapid Shutdown Capability
Generator Compatibility – Dry contact start for backup power
Integrated Protections Include:
DC reverse polarity protection
AC overcurrent & overvoltage protection
Short circuit protection
Thermal protection
Ground fault & earth fault detection
Residual current (RCD) monitoring
Surge protection
Islanding protection
DC insulation monitoring
✔ G98 / G99 Compliant
Total Control with Sunsynk Connect Pro
Unlock full system visibility with Sunsynk Connect Pro:
Monitor energy usage in real time
Remote system control via mobile app
Installer remote commissioning & diagnostics
Multi-site fleet management for commercial users
Firmware updates over the air
Why Choose Sunsynk Acure?
All-in-one hybrid inverter + energy management system
Faster installs with wireless integration
Advanced safety and protection features
Scalable for homes, businesses, and commercial sites
Fully compatible with modern smart energy ecosystems
Perfect For
Homeowners reducing energy bills
Commercial energy optimisation
Solar + battery storage systems
Off-grid and backup power solutions
Smart energy and load management setups
Warranty & Support
Inverter Warranty: 10 years
61.4kWh HV Battery: 10 years
IP65 5.12kWh Battery: 5 years
CATL 5.12kWh Battery: 10 years
Warranty Conditions
UK-based installations are automatically covered
Proof of purchase from installer is required
Failure to provide proof of purchase may void warranty
Fogstar Energy | 2026 Version ECO 16.1kWh 51.2V Solar Battery | Fire Suppression | Heating System | Black
$2,192.00 + VAT
Fogstar Energy 48V 16.1kWh ECO Black Battery (2026 Version)
#12: Fog/Sep/16kw/BL/V2 Fogstar 16.1kWh ECO Datasheet
Next stock due Nov 17th, deliveries can be booked from Nov 20th
*Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products
Commercial-Grade Lithium Storage | Integrated Fire Suppression | Cold-Weather Charging to -10°C
The Fogstar Energy 48V 16.1kWh ECO Battery (2026 Edition) is a fully assembled, high-performance lithium energy storage solution designed for residential and small commercial solar installations.
Built using 3.2V 314Ah Grade A LiFePO₄ cells in a robust 1P16S configuration, this battery delivers exceptional cycle life, reliable performance, and seamless compatibility with leading hybrid inverter brands.
The upgraded 2026 model introduces integrated fire suppression and built-in battery heating, allowing safe charging down to -10°C — making it ideal for garages, plant rooms, outbuildings, and winter installations across the UK.
Whether you're installing for a homeowner or designing a scalable commercial system, this unit offers safety, longevity, and outstanding value.
Key Benefits
✔ Fully Assembled – Ready to Install
Supplied as a complete Fogstar / Seplos built unit. No DIY assembly required. Perfect for installers looking for a plug-and-play solution.
✔ Scalable Energy Storage
Connect up to 16 units in parallel for a total capacity of 257.6kWh — ideal for larger residential projects or commercial energy systems.
✔ Long Lifespan Performance
• 8000 cycles at 80% Depth of Discharge• Designed for long-term daily cycling• Stable LiFePO₄ chemistry
✔ Integrated Fire Suppression (2026 Upgrade)
An automatic, heat-activated aerosol fire suppression system provides rapid internal protection for enhanced system safety.
✔ Cold-Weather Charging to -10°C
Built-in battery heating allows reliable charging in colder environments — perfect for UK winters and unheated installation spaces.
✔ Intelligent Battery Management
• Seplos 200A BMS• JK 2A Active BalancerEnsures optimal cell balancing, extended lifespan, and consistent performance.
✔ Seamless Inverter Compatibility
Pre-loaded communication protocols support:
• Victron• Pylontech• Growatt• Sofar• Solis• Goodwe
Includes:
1.5m CAN & RS485 communication for smooth integration.
1.5m 50mm battery cable terminated with M8 ring lugs
✔ Real-Time Monitoring
Integrated LCD touchscreen display provides live system data and operational feedback.
✔ Commercial-Grade Value
High capacity, premium components, and advanced safety features at an exceptional cost per kWh.
Technical Specifications
Specification
Details
Rated Energy
16.1kWh
Cell Configuration
1P16S
Cell Type
3.2V 314Ah Grade A LiFePO₄
Nominal Voltage
51.2V
Operating Voltage Range
42V – 58.2V
Capacity
314Ah
Cycle Life
8000 cycles @ 25°C, 50A (91% DOD)
Charge Temperature
-10°C to 40°C
Discharge Temperature
-20°C to 40°C
Rated Charge Current
100A
Rated Discharge Current
200A
Maximum Discharge Current
200A
Battery Management System
Seplos 200A BMS
Active Balancer
JK 2A
Weight
119.5kg ±3kg
Dimensions (mm)
898.5 (H) × 415 (L) × 260 (W)
Communication
CAN & RS485
Pre-Loaded Protocols
Victron, Sofar, Pylontech, Growatt, Solis, Goodwe
Warranty
6 Years
Customer Support
10 Years
Ideal For
• Residential solar + battery retrofits• New build solar installations• Off-grid and hybrid systems• Small commercial energy storage• Installations in cold garages or outbuildings• Projects requiring scalable storage capacity
Why Buy From ITS Technologies?
At ITS Technologies, we specialise in supplying reliable, installer-friendly solar and battery solutions across the UK. Our team understands system design, inverter compatibility, and DNO requirements — so you can purchase with confidence.
Need help designing your system? Speak to our technical team today.
Staubli MC4 Evo 2A 4mm Pair
$6.00 + VAT
Staubli MC4 Evo 2A 4mm Pair
Female and Male pair coupler MC4-Evo 2. For cable cross sections of 4 mm². To be used with suitable mated connectors from the MC4 product family and suitable lead.
This is the Evo 2A
Solis Warranty Ext. of 5 years (Total 10 years) for S6 EH1PK-PLUS
$126.00 + VAT
Solis Warranty Extension of 5 years, totalling 10 years including your inverter’s standard 5-year warranty for the S6 EH1PK-PLUS.
How to proceed with ordering the extended warranty:
Select Your Warranty Extension: Choose the relevant warranty extension for your inverter.
Place Your Order: Submit your warranty extension order through our standard ordering process.
Provide Additional Information: Installation date, address and inverter serial number
Process Time: Once your order is placed, our team will initiate the process of ordering the extended warranty from the manufacturer. Kindly note that it may take approximately 6 to 8 weeks for the warranty certificate to be generated and received. From the date of ordering or the date of installation if a later date.
Stay Updated: We will notify you as soon as the warranty certificate is ready for download. An email notification will be sent to your registered email address.
Fogstar-LuxpowerTek 10Kw | Single Phase Hybrid Inverter | On/Off-grid | IP66 | 10yr Warranty
$1,702.00 + VAT
Fogstar-LuxpowerTek 10Kw Single Phase Low Voltage On/Off-grid Hybrid Inverter - White
- WiFi dongle included
#12: F/B93.10011AA
Luxpower Hybrid Data Sheet
Luxpower Hybrid Manual
*Please note: Stock is supplied direct from Fogstar and a minimum of 4 business days is required for mainland UK delivery from when stock is available to dispatch. The calendar at checkout can not be used to book the delivery date for Fogstar/Lux products
LuxPower GEN-LB-EU 10K Hybrid Inverter
High-power hybrid inverter with generator integration and full system flexibility
The Fogstar-LuxPower GEN-LB-EU 10K is a premium single-phase hybrid inverter designed for high-demand residential and light commercial installations. Combining solar PV, battery storage, grid supply, and generator backup in one unit, it delivers a powerful and flexible energy management solution.
With dual MPPT inputs, up to 15kW PV capacity, and an industry-leading 208A battery charge/discharge capability, this inverter is built to maximise solar generation, optimise energy usage, and ensure reliable backup power.
Key Features
10kW rated AC output
Dual MPPT trackers for flexible system design
Up to 15kW maximum PV input
208A maximum battery charge/discharge current
Dedicated generator port with automatic control
Time-of-use & weather-based optimisation
Parallel capability (up to 10 units)
On-grid & off-grid functionality
Build & Installation
Engineered for durability and easy installation in a wide range of environments:
IP66-rated enclosure (indoor & outdoor use)
Smart cooling system for stable operation
Transformerless topology for higher efficiency
Integrated touchscreen colour display
RS485, Wi-Fi & CAN communication
Noise level: ≤50dB
Max operating altitude: 2000m
Physical Specifications:
Dimensions: 536 × 566 × 290mm
Weight: 42.64kg
Operating temperature: -25°C to 60°C
Humidity: 0–100%
Warranty: 10 years
Battery & Power Performance
Optimised for high-performance 48V battery systems, delivering rapid charge and discharge capability:
Nominal battery voltage: 48V
Operating voltage range: 40–60V
Max charge/discharge current: 208A
Max charge/discharge power: 10,000W
Force wake-up from PV supported
Ideal for fast charging during peak solar production or low-cost off-peak tariffs.
Efficiency & Protection
Advanced safety and protection features ensure reliable long-term operation:
Max efficiency: 97.5%
EU efficiency: 94.3%
Charge/discharge efficiency: 94.0%
Integrated DC isolator
Type III AC/DC surge protection
Anti-islanding protection
Overcurrent & overvoltage protection
AC short-circuit protection
Leakage current protection
Ground fault monitoring
Grid monitoring
Certifications:G99, G100, EN/IEC 62109-1/2, IEC 61683, EN 61000, EN 62920, IEC 62116, IEC 61727
AC Output & Grid Performance
Built to integrate seamlessly with standard UK single-phase systems:
Rated AC voltage: 230V
Frequency: 50 / 60Hz
Rated AC output power: 10,000W
Rated AC output current: 34.8A
Max AC input power: 15,000W
Continuous AC passthrough: 60A
Adjustable power factor: 0.8 leading to 0.8 lagging
Total harmonic distortion (THDi): <3%
Delivers clean, stable power for both residential and light commercial loads.
Solar (PV) Input Performance
Designed for large solar arrays and flexible string configurations:
Max PV input power: 15,000W
2 independent MPPTs (2:2 configuration)
MPPT voltage range: 120–550V
Max PV input voltage: 600V
Start-up voltage: 140V
Max PV input current per MPPT: 25A
Max PV short-circuit current per MPPT: 34A
MPPT efficiency: 99.9%
Ideal for multi-orientation roofs, maximising energy yield throughout the day.
Why Choose the GEN-LB-EU 10K?
Powerful 10kW hybrid inverter for demanding installations
Industry-leading 208A battery performance
Full generator integration for backup systems
Scalable design for larger systems
Fully compliant with UK grid standards (G99/G100)
Suitable for on-grid, backup, and off-grid applications
The LuxPower GEN-LB-EU 10K delivers maximum performance, flexibility, and energy independence—making it an ideal choice for modern solar and battery storage systems.
Solis 5kW S6 Plus | Single Phase Low Voltage Hybrid Inverter | AI-Powered | IP66
$980.00 + VAT
Solis 5kW Plus Single Phase S6 Low Voltage Hybrid Inverter
#2: SOL-S6-EH1P5K-L-PLUS-5Y / S6-EH1P5K-L-PLUS
5yr extended warranty available here
Solis S6 Plus Inverter Data Sheet
Solis S6 Hybrid Plus User Manual
Solis Inverter 6kW Warranty
Solis S6-EH1P5K-L-PLUS 5kW Hybrid Inverter – Advanced Energy Storage & Backup Solution
The Solis S6-EH1P5K-L-PLUS Hybrid Inverter is a powerful 5kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems.
Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability.
High Solar Utilisation & Future-Ready PV Compatibility
160% PV Oversizing Support
The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day.
Compatible with Next-Generation Solar Modules
With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels.
Reliable Backup & Off-Grid Capability
Powerful Off-Grid Performance
The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems.
Seamless Grid Transition
With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages.
Flexible Battery Integration
Wide Battery Compatibility
Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions.
Customisable Backup Settings
Users can define battery backup levels to prioritise essential loads and extend available backup time.
Intelligent Energy Management
Smart Load Control
Integrated smart load management ensures critical appliances receive priority power during backup operation.
AI-Powered & VPP Ready
Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services.
System Expansion & Generator Support
Parallel System Capability
Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations.
Generator Integration
Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups.
Built for Durability & Easy Operation
Industrial-Grade LCD Display
The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration.
IP66 Environmental Protection
With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments.
Key Features
5,000W rated power output
Up to 10,000W max DC input power
2 MPPTs for greater system design flexibility
4 DC inputs for multi-string solar arrays
500V maximum input voltage
64A maximum DC current
96.5% Euro efficiency
Integrated DC switch for added safety
Transformerless design for improved efficiency
MC4 connectors for straightforward compatibility
5-year warranty
Input & MPPT Data
MPPT Quantity: 2
Max DC Inputs: 4
Has DC Fuses: No
Connector Type: MC4
General
Weight: 23kg
Transformer: None
Has Integrated DC Switch: Yes
Warranty: 5 Years
Solis 3.6kW S6 Plus | Single Phase Low Voltage Hybrid Inverter | AI-Powered | IP66
$940.00 + VAT
Solis 3.6kW Plus Single Phase S6 Low Voltage Hybrid Inverter
#2: SOL-S6-EH1P3.6K-L-PLUS-5Y
Solis S6 Plus Inverter Data Sheet
Solis S6 Hybrid Plus User Manual
Solis Inverter 6kW Warranty
Solis S6-EH1P3.6K-L-PLUS 3.6kW Hybrid Inverter – Advanced Energy Storage & Backup Solution
The Solis S6-EH1P3.6K-L-PLUS Hybrid Inverter is a powerful 3.6kW single-phase energy storage inverter designed to maximise solar generation, optimise battery storage, and provide reliable backup power. Built with advanced hybrid functionality, this inverter supports both grid-tied and off-grid operation, making it ideal for modern solar energy systems.
Engineered by Ginlong Solis, a globally recognised inverter manufacturer, this model combines cutting-edge technology, intelligent energy management, and exceptional reliability.
High Solar Utilisation & Future-Ready PV Compatibility
160% PV Oversizing Support
The inverter supports PV input up to 160% of its rated DC power, allowing installers to maximise solar generation and improve system performance throughout the day.
Compatible with Next-Generation Solar Modules
With up to 21A PV input current support, the inverter is designed to accommodate modern high-power solar panels.
Reliable Backup & Off-Grid Capability
Powerful Off-Grid Performance
The inverter delivers 200% overload capacity for up to 10 seconds in off-grid mode, ensuring reliable start-up of high-demand appliances such as motors, pumps, and air conditioning systems.
Seamless Grid Transition
With under 10ms switching time, the inverter enables seamless transitions between grid and backup power, helping maintain uninterrupted electricity supply during outages.
Flexible Battery Integration
Wide Battery Compatibility
Supports low-voltage batteries between 40V and 60V, offering compatibility with a broad range of battery storage solutions.
Customisable Backup Settings
Users can define battery backup levels to prioritise essential loads and extend available backup time.
Intelligent Energy Management
Smart Load Control
Integrated smart load management ensures critical appliances receive priority power during backup operation.
AI-Powered & VPP Ready
Advanced energy management enables integration with virtual power plant (VPP) platforms, allowing users to optimise energy savings and potentially generate additional revenue through grid services.
System Expansion & Generator Support
Parallel System Capability
Supports up to 6 units in parallel, enabling scalable energy storage solutions for larger installations.
Generator Integration
Multiple generator connection methods with automatic control allow flexible backup power options for off-grid or hybrid setups.
Built for Durability & Easy Operation
Industrial-Grade LCD Display
The large 7-inch industrial-grade LCD screen provides a clear and intuitive interface for local monitoring and configuration.
IP66 Environmental Protection
With IP66-rated ingress protection, the inverter is designed to operate reliably in demanding outdoor environments.
Key Features
3,600W rated power output
Up to 7,200W max DC input power
2 MPPTs for greater system design flexibility
4 DC inputs for multi-string solar arrays
435V maximum input voltage
64A maximum DC current
96.5% Euro efficiency
Integrated DC switch for added safety
Transformerless design for improved efficiency
MC4 connectors for straightforward compatibility
5-year warranty
Technical Specifications
Input & MPPT Data
MPPT Quantity: 2
Max DC Inputs: 4
Has DC Fuses: No
Connector Type: MC4
General
Weight: 23kg
Transformer: None
Has Integrated DC Switch: Yes
Warranty: 5 Years
Solis 10kW S6 | 2 x Fogstar 16.1kWh ECO batteries | Coventry
Example Installation – High-Capacity Solar Battery Storage in High Coventry
Important Notice
(This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here.
Our customers are projected to save around £2.5k per year, achieving a payback in under 3 years by charging their system from Octopus cheap night-time electricity.
Why Choose This Battery Storage Setup?
This example highlights the benefits of pairing a Solis 10kW hybrid with Fogstar 16.1kWh ECO batteries, providing reliable energy storage, reduced grid dependence, and smarter energy management for residential properties.
System Specification
Hybrid Inverter/Charger: Solis 10kW
Battery Storage: 2 x Fogstar 16.1kWh ECO batteries
For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.
Sunsynk 8kW ECCO | 3 x Dyness PowerBox G2 10.24kWh batteries | Zapp EV charger | High Wycombe
Example Installation – High-Capacity Solar Battery Storage in High Wycombe
Important Notice
(This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here.
Our customers are projected to save around £2k per year, achieving a payback in under 4 years by charging their system from Octopus cheap night-time electricity.
Why Choose This Battery Storage Setup?
This example highlights the benefits of pairing a Sunsynk 8kW hybrid with Dyness high-capacity batteries, providing reliable energy storage, reduced grid dependence, and smarter energy management for residential properties.
System Specification
Hybrid Inverter/Charger: Sunsynk 8kW
Battery Storage: 3 x Dyness Powerbox G210.24kWh batteries
Zappi EV charger
For advice or a bespoke solar and battery storage quote, complete our quote form or email support@itstechnologies.uk.
SolaX Smart 7.2kW EV Charger G2 - Tethered
$450.00 + VAT
SolaX Smart 7.2kW EV Charger G2 - Tethered
#2: SOLAX-X1-HAC-7K EV Charging - EV Charger
SolaX EV Charger G2 Data Sheet
SolaX EV Charger G2 Installation Manual
SolaX EV Charger G2 User Manual
SolaX EV Charger G2 Warranty
The SolaX Smart 7.2kW EV Charger G2 – Tethered is an intelligent, high-performance EV charging solution designed to deliver fast, efficient, and solar-optimised vehicle charging. With 7.2kW charging power, 32A output, and advanced smart controls, it is ideal for users looking to maximise renewable energy usage while maintaining safe and reliable charging.
Built with flexible installation options, RFID access control, and app-based remote management, this charger is designed for seamless integration with modern solar PV and energy storage systems.
Flexible Installation & Smart Adaptability
Tethered Design for Everyday Convenience
The tethered charging cable offers fast, hassle-free connection, making daily EV charging simple and user-friendly.
Indoor & Outdoor Installation
Designed for flexible placement, the charger supports both indoor and outdoor installation, making it suitable for driveways, garages, car ports, and parking areas.
Multiple Communication Protocols
Supports multiple communication methods for easy integration with smart home and energy management systems.
Solar Integration & Energy Efficiency
100% Green Energy Charging
The charger can operate using 100% surplus solar energy, helping reduce grid reliance and lower charging costs.
Intelligent Surplus Energy Use
Optimised for zero-export solar systems, it automatically prioritises excess solar generation for EV charging.
Automatic Phase Switching
Advanced phase switching technology ensures efficient power delivery and compatibility with different charging scenarios.
Safety & Intelligent Load Control
Advanced Leakage Protection
Integrated 30mA AC and 6mA DC leakage protection ensures safe charging and compliance with modern safety standards.
Dynamic Load Balancing
Smart load management automatically adjusts charging power to prevent overloading and maintain electrical stability.
Smart User Control & Access
RFID Access Management
The built-in RFID smart access system adds secure charging control, ideal for controlled or shared access environments.
App Remote Control
Monitor charging status, adjust settings, and manage schedules remotely through the SolaX smart app.
Technical Specifications
Charging Performance
Rated Power: 7.2 kW
Charging Current: 32 A
Charger Type: Tethered
Product Details
Supplier Part Number: SOLAX-X1-HAC-7K
Connector Type: Type 2
Weight: 10.5 kg
Why Choose the SolaX Smart 7.2kW EV Charger G2?
✔ Fast 7.2kW EV charging✔ Solar-ready with surplus energy optimisation✔ Tethered cable for simple daily use✔ RFID and smart app control✔ Dynamic load balancing and leakage protection✔ Suitable for indoor and outdoor installation
Dyness DL5.0C Pro | 5.12kWh Lithium Battery | Wall mounted or stackable | IP20 | | Heating Element | Fire Suppression
$1,061.00 + VAT
Dyness DL5.0C Pro 5.12kWh LV LFP Battery (indoor only) Heating Element
#2: DY-DL5.0C-PRO
Dyness DL5 Pro 5.12kWh Datasheet
Dyness DL5 Pro 5.12kWh User Manual
Dyness Compatibility List
Dyness DL5 5.12kWh Warranty
To view complete Dyness full range please visit our Dyness main page
Dyness Pro stackable brackets available here
The Dyness DL5.0C Pro is a high-performance 5.12kWh lithium battery storage system designed for reliable residential energy storage. Built with advanced lithium-ion technology, this compact and efficient battery helps homeowners store surplus solar energy for use when they need it most, reducing reliance on the grid and improving energy independence.
Ideal for domestic solar and battery storage systems, the Dyness DL5.0C Pro combines strong performance, flexible scalability, and intelligent temperature management in a sleek wall-mounted or floor-standing design.
Key Features
5.12kWh Usable Battery Storage
The Dyness DL5.0C Pro offers 5.12kWh nominal energy capacity, making it well suited for storing excess solar generation for evening and overnight use. It is an excellent option for homeowners looking to improve self-consumption and reduce electricity bills.
Expandable System Design
This battery supports up to 50 units in parallel, allowing for substantial system expansion where higher storage capacity is required. Whether for a small domestic setup or a larger energy storage installation, the DL5.0C Pro offers impressive scalability.
1C Discharge Performance
With 1C discharge capability, the Dyness DL5.0C Pro delivers strong output performance for demanding household loads. This makes it suitable for homes that require dependable battery discharge for high-consumption periods.
Integrated Heating Function
The built-in heating function supports battery operation in colder conditions, helping maintain reliable performance across a wide operating temperature range. It can charge and discharge in temperatures from -20°C to 50°C, making it a practical solution for varied installation environments.
Long-Life Lithium-Ion Technology
Using advanced lithium-ion battery chemistry, the Dyness DL5.0C Pro delivers dependable long-term performance, high efficiency, and excellent depth of discharge to maximise usable stored energy.
Compact and Practical Design
With a weight of 46kg, the Dyness DL5.0C Pro offers a compact and manageable storage solution for residential battery installations while maintaining robust performance.
Technical Specifications
Battery Performance
Nominal Energy: 5.12kWh
Battery Type: Lithium-Ion
Nominal Voltage: 51V
Operating Voltage Range: 44.7V – 57.6V
Depth of Discharge: 90%
Discharge Rate: 1C
Power Output
Continuous Discharge Rate: 5632W
Maximum Discharge Rate (5 Minutes): 3840W
Surge Discharge Rate (15 Seconds): 5632W
Maximum Charge Rate (5 Minutes): 3840W
Environmental & Physical Details
IP Rating: IP20
Operating Temperature: -20°C to 50°C
Heating Function: Yes
Weight: 46kg
Important Compatibility Information
Please note that the Dyness DL5.0C Pro is not compatible with the Dyness DL5.0C. These two battery models must not be mixed within the same battery system.
Why Choose the Dyness DL5.0C Pro?
The Dyness DL5.0C Pro is a strong choice for homeowners and installers looking for a reliable solar battery storage solution with flexible expansion, solid discharge performance, and dependable year-round operation. Its combination of 5.12kWh storage capacity, parallel scalability, and integrated heating makes it a versatile option for modern residential energy systems.
Whether you are upgrading an existing solar battery setup or installing a new energy storage system, the Dyness DL5.0C Pro offers the performance and flexibility needed for efficient home energy management.
Regulatory Requirement (UK)
In accordance with PAS regulations, this battery requires a battery disconnector, such as: KETO-00-80A Battery Isolator
Dyness DL5.0C Pro - Stacking Bracket
$43.00 + VAT
Dyness DL5.0C Pro - Stacking Bracket
Part No: DY-DL5.0C-PRO-STACKBRACKET Storage Systems - Battery RackStacking Bracket (1 pair of brackets required per battery) for up to 6 units of Dyness DL5.0C Pro batteries
485W Aiko Neostar 3S | N-Type ABC, 54 Cell All Black Gen 3 Solar Panel | 24.3% efficiency | Cell-Level optimisation | Micro-crack resistant | Minimum Order: 1
$150.00 + VAT
485W Aiko Neostar 3S N-Type ABC Solar Panel – Gen 3
3: 7831
Downloads
Aiko 485W Datasheet
Aiko 485W Installation Manual
Aiko 485W Warranty
Aiko Certificate of Compliance
Explore Our Full Solar Panel RangeBrowse our complete collection of high-performance solar panels [here].
Available for supply only or with professional installation. For a tailored system designed around your home and energy needs, simply complete our bespoke quote form [here].
Aiko Neostar 3S N-Type ABC 485W All-Black Solar Panel
The Aiko Neostar 3S 485W Solar Panel, part of the third-generation Neostar line – designed for maximum power output, efficiency, and sleek aesthetics. Featuring N-Type ABC monocrystalline cells, this module leads the industry with 24.3% efficiency and a true-black, all-glass design, making it ideal for modern rooftops in the UK.
Awarded multiple international recognitions, including the Intersolar Innovation Award 2023, this panel is perfect for customers seeking a high-performance, long-lasting, and visually appealing solar solution.
Key Features
Award-Winning InnovationWinner of:
Intersolar Innovation Award 2023
Red Dot Design Award 2023
ESG Transparency Award 2024
Industry-Leading EfficiencyMarket-leading 24.0% module efficiency for optimal energy yield in all conditions.
Advanced Cell Technology
N-Type ABC cells with no Light Induced Degradation (LID)
Precision Overlap Soldering eliminates inter-cell gaps
Hidden busbars for enhanced active surface area and sleek black appearance
Shading & Temperature Optimisation
Unique cell-level partial shading optimization
Superior temperature coefficient of -0.26%/°C
Ideal for UK climates with varying solar exposure
Enhanced Durability & Safety
Micro-crack resistance for long-term reliability
High temperature limit for improved fire safety
True Black Aesthetics
Elegant mono glass all-black design
Ideal for residential rooftops and architectural integration
Technical Specifications
Dimensions
Width: 1,134 mm
Height: 1,762 mm
Cell Type: 54 Cells Monocrystalline (54 cells)
Module Format: All-black, mono glass (front)
Weight: 21kg
Performance & Electrical
Nominal Power Output: 485 W
Efficiency: 24.3%
Maximum System Voltage: 1500V DC
Temperature Coefficient (Pmax): -0.26 %/°C
Connectors & Cabling
Cable Length: 1.2 m (includes 1200mm landscape cable)
Connector Type: Staubli MC4 EVO2
Warranties
Product Warranty: 25 Years
Performance Warranty: 30 Years (based on linear performance guarantee)
Certified by leading PV testing labs and safety standards
9.6kW AIKO | Sigenergy Sigenstor 10kW hybrid with 4 X 9.04Wh batteries | Wellingborough
9.6kW Solar PV System – Wellingborough Installation Example
Important Notice
(This is an example of one of our installations. This system is not available for free, so please do not purchase.) For a bespoke Solar PV quote, please complete of quote form here. Or for a battery only system you can view our range of packages here.
Installation Overview
Our customer in Wellingborough chose a high-performance AIKO solar panels and battery system to maximise energy efficiency and reduce electricity costs. The system combines 20 x 490W AIKO panels, a Sigenergy 10kW hybrid inverter, and 4 x 9.04kW Sigenergy batteries for reliable energy storage.
System Specifications
Solar Panels: 20 x 490W AIKO Gen 3
Hybrid Inverter: Sigenergy 10kW
Battery Storage: 4 x 9.04kW Sigenergy batteries
This installation highlights a compact yet powerful residential solar solution designed for optimal energy management and long-term savings.
Looking to save money on your energy bills? Visit ITS Technologies to explore a wide range of installed battery storage packages or email us at support@itstechnologies.uk for expert advice and bespoke quotes.